06-15-2024, 10:00 AM | #61 |
Join Date: Jul 2019
Location: Lancaster,Ky
Posts: 449
|
Now I'm looking to purchase a service manual for the Linhai 260/300 4x4 atv.I have a couple already downloaded & saved on my computer but I want a paper back version.I just don't know if my printer could print out 360 pages plus whether I got the ink to do that.
Last edited by dugndeep; 06-18-2024 at 10:05 AM. |
|
07-09-2024, 10:37 AM | #62 |
Join Date: Jul 2019
Location: Lancaster,Ky
Posts: 449
|
I've been going around the atv trying to find all the zerk grease fittings and applying some grease to them.I think I have found them all & am now wondering about the front hub carrier bearings.Their like the old cars & tractors ect & their not a sealed bearing.
|
|
07-09-2024, 10:49 AM | #64 |
Moderator
Join Date: Oct 2016
Location: Houma, La.
Posts: 11,628
|
I would drill and tap it to install a grease zerk.
__________________
2023 Lifan Lycan 250 Chopper 2023 Venom Evader 2022 Lifan KPX250 2020 Kawasaki Vulcan S (Sold) 2004 Honda ST 1300 2016 Black Hawk 250 (sold) Keihin PE30 carb,125 main,38 slow.Pod filter,ported & decked head 10:1 CR,Direct Ignition Coil,15/40Sprockets,NGK DPR8EIX-9,De-Cat,Dual Oil Cooler,Digital Cluster 2016 Cazador180 XL 2014 Coolster150 JerryHawk250.com My YouTube Channel |
|
07-09-2024, 10:54 AM | #65 |
Join Date: Jul 2019
Location: Lancaster,Ky
Posts: 449
|
That's the 2wd version above & I don't know if that is a threaded hole for the zerk fitting or not.The 4wd doesn't have that & has the splined shaft running through it.
|
|
07-09-2024, 10:58 AM | #66 |
Join Date: Jul 2019
Location: Lancaster,Ky
Posts: 449
|
I suppose you might could on the back side of the rotor.
|
|
07-09-2024, 11:17 AM | #67 |
Join Date: Jul 2019
Location: Lancaster,Ky
Posts: 449
|
I think they skimped on the grease in the fittings,some I don't think they put any grease in & that's why I'm worried about the front axle bearings.
|
|
07-09-2024, 11:23 AM | #68 |
Join Date: Jul 2019
Location: Lancaster,Ky
Posts: 449
|
I'll have to take the wheel off,cotter pin & nut just to see what kind of grease is in there.There's a grease fitting on the steering shaft,I had to take the front cover off to get to it & they must have never put any grease in it,so much easier to steer after putting grease in the steering bushing.
|
|
07-09-2024, 11:26 AM | #69 |
Moderator
Join Date: Oct 2016
Location: Houma, La.
Posts: 11,628
|
As long as the zerk doesn't interfere with the bearings or shaft, I wouldn't think you would have any issues with installing one.
__________________
2023 Lifan Lycan 250 Chopper 2023 Venom Evader 2022 Lifan KPX250 2020 Kawasaki Vulcan S (Sold) 2004 Honda ST 1300 2016 Black Hawk 250 (sold) Keihin PE30 carb,125 main,38 slow.Pod filter,ported & decked head 10:1 CR,Direct Ignition Coil,15/40Sprockets,NGK DPR8EIX-9,De-Cat,Dual Oil Cooler,Digital Cluster 2016 Cazador180 XL 2014 Coolster150 JerryHawk250.com My YouTube Channel |
|
07-09-2024, 11:42 AM | #70 |
Join Date: Jul 2019
Location: Lancaster,Ky
Posts: 449
|
Parts catalog.I'm trying,one picture is to big & the other is so small you can't hardly see it.I'll just have to take the hub carrier off to see.
|
|
|
|
|
|