03-06-2015, 11:21 AM | #61 | |
Join Date: Mar 2009
Location: Sardis, BC, Canada
Posts: 25,977
|
Quote:
Honestly, the skill set of our members is amazing.
__________________
Weldangrind "I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer |
|
|
03-17-2015, 08:59 AM | #62 |
Join Date: Mar 2015
Location: West Midlands, UK
Posts: 56
|
Right I'm going to spend the day looking into making an OBD connector for this bike, see on the wiring diagram there is 6 wires to the diagnostics port, both K-line and canbus connections..... I will try the K-line first (easiest) and see if my diagnostic gear picks up anything then look into the canbus connection ... I see there is a note on Delphi's pinout diagram for the ECU that canbus is used for ECM development only so maybe caution needed, wouldn't want to disable my bike .....
|
|
03-17-2015, 10:32 AM | #63 |
Join Date: Mar 2009
Location: Sardis, BC, Canada
Posts: 25,977
|
I'm pretty someone (Spud, perhaps?) found an OBDII adapter for the Delphi connector. Perhaps that would take some risk out.
__________________
Weldangrind "I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer |
|
03-17-2015, 10:48 AM | #64 | |
Join Date: Jul 2008
Location: Idaho
Posts: 25,054
|
Quote:
__________________
Spud "Never argue with an idiot. He will drag you down to his level, and beat you with experience." Mark Twain 2015 Zongshen ZS250GY-3 (RX3) 2006 Zongshen ZS200GY-2 (Sierra 200) 2005 Honda XR650L 2004 Honda CRF250X 1998 Kawasaki KDX220 Mods made to my Zongshen ZS200GY-2: http://www.chinariders.net/showthread.php?t=6894 |
|
|
03-17-2015, 12:11 PM | #65 |
Join Date: Mar 2015
Location: West Midlands, UK
Posts: 56
|
Diagnostics
Made up a lead, connected to the port and nothing, no data being picked up from the K Line on my bike :-( Will have to try the canbus connections next, I've included a pic of the port pinout. I'm wondering if pin 5 is equivalent to a L line connection needed to 'wake up' the K Line communications? Any thoughts? Attached pic of the OBD adapter lead I've made, probes for 12+, ground and K-Line.
Last edited by No1Vic; 05-19-2015 at 01:14 PM. Reason: Added pic |
|
03-18-2015, 03:14 AM | #66 |
Join Date: Mar 2015
Location: West Midlands, UK
Posts: 56
|
Look what I've found on good old ebay,,,,I wonder if it's worth a try: http://www.ebay.co.uk/itm/KAWASAKI-6...item2594f846cf
__________________
2015 Honley RX3 2010 Suzuki 1250 Bandit 2006 Suzuki Hayabusa |
|
03-18-2015, 10:43 AM | #67 |
Join Date: Mar 2009
Location: Sardis, BC, Canada
Posts: 25,977
|
Not a bad price, if it will do what you need.
__________________
Weldangrind "I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer |
|
03-18-2015, 03:44 PM | #68 |
Join Date: Mar 2015
Location: West Midlands, UK
Posts: 56
|
The Harley Davidsons use the Delphi MT05 ECM.........lots of tuning interfaces available to do your own fuel mapping for them,mmmmm now then it must be research time ;-)
__________________
2015 Honley RX3 2010 Suzuki 1250 Bandit 2006 Suzuki Hayabusa |
|
04-26-2015, 03:39 PM | #69 |
Join Date: Apr 2015
Posts: 2
|
Delphi flashing tool
Hi
Here is SW for flashing Delphi MT05 ECUs http://bitbox.ru/en/catalog/1 Maybe someone needed for tuning cheers |
|
04-26-2015, 05:49 PM | #70 |
Join Date: Jul 2008
Location: Idaho
Posts: 25,054
|
Thanks for posting the link.
__________________
Spud "Never argue with an idiot. He will drag you down to his level, and beat you with experience." Mark Twain 2015 Zongshen ZS250GY-3 (RX3) 2006 Zongshen ZS200GY-2 (Sierra 200) 2005 Honda XR650L 2004 Honda CRF250X 1998 Kawasaki KDX220 Mods made to my Zongshen ZS200GY-2: http://www.chinariders.net/showthread.php?t=6894 |
|
05-01-2015, 07:37 AM | #71 | |
Join Date: Apr 2015
Posts: 2
|
Quote:
Mt05 and mt05.2 using all around has K-line to communicate Harley MT05 - using CAN so any tools for harley will not work |
|
|
05-01-2015, 10:57 AM | #72 |
Join Date: Jul 2008
Location: Idaho
Posts: 25,054
|
Thank you for posting that good information.
__________________
Spud "Never argue with an idiot. He will drag you down to his level, and beat you with experience." Mark Twain 2015 Zongshen ZS250GY-3 (RX3) 2006 Zongshen ZS200GY-2 (Sierra 200) 2005 Honda XR650L 2004 Honda CRF250X 1998 Kawasaki KDX220 Mods made to my Zongshen ZS200GY-2: http://www.chinariders.net/showthread.php?t=6894 |
|
05-10-2015, 03:29 PM | #73 |
Join Date: Jan 2015
Location: England
Posts: 382
|
I have found a USB connector that looks like it might connect a laptop running the PCHUD software to the Delphi Mt05 diagnosis plug.
(I haven't checked the plug but it looks about right) http://detail.1688.com/offer/4223376...0.0.0.0.ubmz58 (reference to RX3 in description) and here I think is the same item on Taobao http://item.taobao.com/item.htm?spm=...ucket=2#detail the description suggests it might come with software. Its a long shot but you never know it might just work |
|
05-11-2015, 12:05 AM | #74 |
Join Date: Jul 2008
Location: Idaho
Posts: 25,054
|
Thanks for posting the link, Kat. You are quickly becoming a Taobao Guru.
__________________
Spud "Never argue with an idiot. He will drag you down to his level, and beat you with experience." Mark Twain 2015 Zongshen ZS250GY-3 (RX3) 2006 Zongshen ZS200GY-2 (Sierra 200) 2005 Honda XR650L 2004 Honda CRF250X 1998 Kawasaki KDX220 Mods made to my Zongshen ZS200GY-2: http://www.chinariders.net/showthread.php?t=6894 |
|
05-11-2015, 12:55 AM | #75 | |
Join Date: Mar 2009
Location: Sardis, BC, Canada
Posts: 25,977
|
Quote:
__________________
Weldangrind "I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer |
|
|
|
|
|
|