09-08-2022, 09:40 AM | #661 | |
Join Date: Feb 2021
Location: Kansas City
Posts: 2,684
|
Quote:
|
|
|
09-08-2022, 09:45 AM | #662 |
Join Date: Oct 2020
Location: Central VA
Posts: 1,283
|
Does anyone know how many chain links are required when running 13/42 and/or 14/42 or know how many links come stock. Want to change out the stock chain at some point.
__________________
2024 Templar 250 2021 Beta 500 RRS 2018 VStrom 1000 XT Former China Bikes: Tao DBX1, Brozz 250, CSC RX4, Titan DLX, Templar X, Storm DLX 150 |
|
09-08-2022, 11:39 AM | #663 |
Join Date: Sep 2022
Location: arkansas
Posts: 44
|
missing bolt from axle caps (8.8 i think)..... and what might be speed sensor bolt
Should I just tell whoever has been emailing from PS, or look for a special link at at customer service? I will buy that spannier pannier when it comes. Thanks for that maybe a grouply purchase from alibaba ...
__________________
arkansas |
|
09-08-2022, 04:13 PM | #664 | |
Join Date: Sep 2022
Location: arkansas
Posts: 44
|
Quote:
I might have also torn a seal pounding it together
__________________
arkansas |
|
|
09-08-2022, 05:33 PM | #665 |
Join Date: Sep 2022
Location: arkansas
Posts: 44
|
Front brake. Is that also needing attention?
No movement, hand feeling the caliper. templar hydraulics
__________________
arkansas |
|
09-08-2022, 06:56 PM | #666 |
Join Date: May 2022
Location: Harvey’s Lake
Posts: 59
|
Just email zora. I had shipping damage and after 100 miles I had an issue with my engine. PSM sent me all the replacement parts I needed and a replacement engine.
|
|
09-08-2022, 08:32 PM | #667 | |
Join Date: Feb 2021
Location: Kansas City
Posts: 2,684
|
Quote:
I noticed dry caliper on mine. Before you panic, get it all together, add fluid in the reservoir on the handlebars, and begin the bleed. No problem with the hardware... |
|
|
09-08-2022, 09:39 PM | #668 |
Join Date: Sep 2022
Location: arkansas
Posts: 44
|
front brake
you were right...took me long enough, I emptied that tiny rez three times sucking air
....but it required mighty-vac, to get any pressure
__________________
arkansas |
|
09-09-2022, 06:25 AM | #669 | |
Join Date: Jun 2022
Posts: 44
|
Quote:
|
|
|
09-09-2022, 06:48 AM | #670 | |
Join Date: Jun 2022
Posts: 44
|
Quote:
On the base model, there are no pinch bolts on the front axel, so that gets a pre ride check too. Lots of smart people on here, sharing. Good times. |
|
|
09-09-2022, 07:01 AM | #671 | |
Join Date: Jun 2022
Posts: 44
|
Quote:
KISS matters most to me in this category of low cost enduros. |
|
|
09-09-2022, 07:05 AM | #672 |
Join Date: Jun 2022
Posts: 44
|
I used a 112 link RK chain and removed two links. The 110 works for me with 13/42 or 14/42.
|
|
09-09-2022, 05:46 PM | #674 |
Join Date: Sep 2022
Location: Lisbon, IA
Posts: 24
|
Not sure if this will be helpful/useful but I see many questions about air filter cross references... I have been poking around trying to figure out what seat was copied for the Templar X. There was a clue I missed way earlier in the 1st post by ExMxer. Along the way recently, I stumbled on photos that make me think it uses the exact same seat pan as the 07-09 Suzuki RMZ250. Might try snagging a beat up used one cheap on ebay to confirm.. Anyway, While looking into this it also looks like the airbox\filter are the same and maybe some other body parts, tank? & possibly handlebar controls\levers?... I came back here and did a site search for RMZ references and it was in very 1st post of this thread "...The Suzuki style shrouds on the tank scream second generation RMZ 250..."
|
|
09-10-2022, 02:11 PM | #675 |
Join Date: Feb 2021
Location: Kansas City
Posts: 2,684
|
You are correct. The gearing on the rear drive won't affect the speedo.
|
|
|
|
|
|