![]() |
#46 |
Join Date: Jun 2014
Location: Monroe, WI
Posts: 104
|
[QUOTE=culcune;169985]These tips are great! I personally like the noisy turn signals simply because I am one of those types that forgets to cancel the signal and will ride for miles with my signal flashing. But I have been contemplating getting rid of the alien-to-me EPA smog crap that was forced on the '13 and '14 TMEC models.
yes i think i would forget the blinker too, thats why i just put tape over it for now. not nearly as embarrassing when sitting at a stop light and having people stare… loud enough to hear, but not from a block away! the exhaust looks simple enough too, have a friend thats a big welder. any pics on what you did to take that other piece off by the spark plug? i kinda looked at it, and ill have to have someone do that for me I'm sure. i see the plate you have on it now where mine has a tube going up into the bike somewhere. i don't think ill have to do anything with my sprockets, i can get up to 60 real easy and still have throttle left to use. unless I'm missing something about the advantages of different size sprockets. haven't tried to get a top speed yet, being a new engine and all… I've had a few guys give me the business for buying chinese - until they check it out. now they are jealous! they all say its a fine bike! of coarse they all say 'until you need parts' but with you guys, I'm not worried at all!! |
![]() |
![]() |
#47 |
Join Date: Feb 2009
Location: Green Bay, WI
Posts: 82
|
I will put a more detailed post together on removing the EPA crap.
For the fun of it you should wager your buddies on how long and how many miles you keep this bike. I am quite sure it will out last your desire to own it, and if you own it forever then they will be like WTF. |
![]() |
![]() |
#48 |
Join Date: May 2006
Location: Yuma, Arizona
Posts: 9,048
|
I like the smaller rear sprocket because I have to maintain about 55 mph for several miles (the speed limit is actually only 50, but it's a two lane, and people like to hit 70 or more, so they make you feel like you are holding them back "excuse me, I didn't realize we really have 'the Purge' and everything is legal this morning"). The 48 tooth sprocket lets me maintain 55 to 60 rather than simply running it up to those speeds with the engine screaming to slow down because it feels like it is being tortured (as well as you feel tortured by the massive vibrations, LOL). Ideally, I would like a 44, but don't want to have one custom made. For what you are riding for, the 56 is ideal, but you will realize what I am saying when you take if several miles on a highway maintaining 55 mph (hopefully your locals are far nicer than southern AZ locals who seemed to have learned, and maintain practice with, the "anything-goes" driving mentality from across the border (i.e. the 75 mph in a 50 zone morning commute)
__________________
"They say that life's a carousel, spinning fast you got to ride it well..." TGB Delivery Scooter 150 TMEC 200 Enduro--carcass is sadly rotting in the backyard |
![]() |
![]() |
#49 |
Join Date: Jul 2008
Location: Idaho
Posts: 25,054
|
Thanks for posting more, great tips.
![]() ![]()
__________________
Spud "Never argue with an idiot. He will drag you down to his level, and beat you with experience." ![]() 2015 Zongshen ZS250GY-3 (RX3) 2006 Zongshen ZS200GY-2 (Sierra 200) 2005 Honda XR650L 2004 Honda CRF250X 1998 Kawasaki KDX220 Mods made to my Zongshen ZS200GY-2: http://www.chinariders.net/showthread.php?t=6894 |
![]() |
![]() |
#50 |
Join Date: Mar 2009
Location: Sardis, BC, Canada
Posts: 25,977
|
Matt, I don't know how I missed your post on modifying the cat, but that's awesome. How did you remove the honeycomb from the tube? When I tried it that way, I had a brutal time removing the cat.
__________________
Weldangrind "I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer |
![]() |
![]() |
#51 | |
Join Date: Jul 2014
Location: Texas Hill Country
Posts: 144
|
Quote:
Thanks! Jim
__________________
2008 Zongshen 200GY-A, HS163FML : Needs: Battery, Battery Box, Both clutch and brake handles, exhaust system, all plastics, gas cap, starter rewired. Her name will be Phoenix. 2007 Shineray Speedee 150, 1P57QMJ: Needs: starter rewired, exhaust connected, cleaned up, ignition switch simplified, new seat and lights, new front and back racks. There's no such thing as a free puppy or motorcycle. I think I have caught the fever from y'all. |
|
![]() |
![]() |
#52 | |
Join Date: May 2006
Location: Yuma, Arizona
Posts: 9,048
|
Quote:
Seeing what you have been doing with your lathe and now you mention your CNC, my guess is you will have no trouble figuring out how to pattern a sprocket for these from a 'blank' one. If it is any help to look at diagrams, go to JT Sprockets' website and the ones the wheel of the TMEC bolt pattern copies are their JTR1134 series: JTR1134.54, JTR1134.52, JTR1134.50, and JTR1134.48
__________________
"They say that life's a carousel, spinning fast you got to ride it well..." TGB Delivery Scooter 150 TMEC 200 Enduro--carcass is sadly rotting in the backyard |
|
![]() |
![]() |
#53 |
Join Date: May 2013
Location: finger lakes NY
Posts: 2,060
|
on mine i used a cuttoff wheel to crop the tube just above the plate and welded it shut... just has a cute little nub left now...LOL
|
![]() |
![]() |
#54 | |
Join Date: Jul 2014
Location: Texas Hill Country
Posts: 144
|
Quote:
Thanks all, Jim
__________________
2008 Zongshen 200GY-A, HS163FML : Needs: Battery, Battery Box, Both clutch and brake handles, exhaust system, all plastics, gas cap, starter rewired. Her name will be Phoenix. 2007 Shineray Speedee 150, 1P57QMJ: Needs: starter rewired, exhaust connected, cleaned up, ignition switch simplified, new seat and lights, new front and back racks. There's no such thing as a free puppy or motorcycle. I think I have caught the fever from y'all. |
|
![]() |
![]() |
#55 |
Join Date: Jun 2014
Location: Monroe, WI
Posts: 104
|
so i kinda get the - take the pipe out, and plug it part. but haven't pulled plastics off yet and wondering where the pipe goes once its behind the plastic… assuming it goes into something, the exhaust is what it sounds like, and ill have to plug that too?? i prob won't do this or the exhaust cut and pulling of baffle until this fall, but letting the guy who is going to help me know what we are going to be doing.
|
![]() |
![]() |
#56 |
Join Date: May 2006
Location: Yuma, Arizona
Posts: 9,048
|
Interestingly, mine did not have any baffling in the exhaust? I had taken it off a few weeks ago (both front and back) and never noticed anything in my pipe. My old bike ('09 model) didn't have any baffling, either, but it could have already been removed since I bought the bike used. But my new bike, for sure, does not have the waffle cone stuffed up the exhaust?! One less thing to do, I guess!
__________________
"They say that life's a carousel, spinning fast you got to ride it well..." TGB Delivery Scooter 150 TMEC 200 Enduro--carcass is sadly rotting in the backyard |
![]() |
![]() |
#57 | |
Join Date: Feb 2009
Location: Green Bay, WI
Posts: 82
|
Quote:
http://www.solomotoparts.com/Graves-...quJxoC52Xw_wcB |
|
![]() |
![]() |
#58 |
Join Date: Feb 2009
Location: Green Bay, WI
Posts: 82
|
It takes all of 15 min to take the smog crap off. The hose that connects to the engine goes to the pump then to the carb. Just remove all of the stuff and hoses. Make a plate to cover the hole in the side of the engine and buy a vacuum cap kit from the auto parts store.
http://www.oreillyauto.com/site/c/de...1167&ppt=N1171 How it works. The hose that goes from the carb to the pump is there to use the engine vacuum to generate a pulse signal for the pump to work. The pump has a hose connected to it that has a small canister on one side to bring in fresh air. The pump then takes this fresh air and pumps it into the exhaust to meet the emmissions test minimum. |
![]() |
![]() |
#59 | |
Join Date: Feb 2009
Location: Green Bay, WI
Posts: 82
|
Quote:
|
|
![]() |
![]() |
#60 |
Join Date: Feb 2009
Location: Green Bay, WI
Posts: 82
|
I put the cut pipe sections in the vice then I drilled it out. I started small to larger on the drills and once I hit 1/2" it just caught and ripped all the remaining crap out.
|
![]() |
|
![]() |
![]() |
Tags |
163fml, 200cc, tmec, tmec-200, tmec-200-1 |
|
|