01-24-2015, 12:54 PM | #31 |
Join Date: Jan 2015
Posts: 36
|
I'm in Rockland county
|
|
01-24-2015, 01:22 PM | #32 |
Join Date: Mar 2009
Location: Sardis, BC, Canada
Posts: 25,977
|
It could be tough to find slow jets for that carb. A 30mm Mikuni is much easier. Here's one: http://www.ebay.com/itm/Carburetor-A...c1c85d&vxp=mtr
__________________
Weldangrind "I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer |
|
01-28-2015, 10:06 PM | #33 |
Join Date: Jan 2015
Posts: 36
|
hey weld
where can i find the replacement jets for the 30mm mikuni carb. i ordered the carb but want to up the jets like you recommended. 110 main and should i do 30 0r 25 |
|
01-29-2015, 06:44 PM | #34 |
Join Date: Mar 2009
Location: Sardis, BC, Canada
Posts: 25,977
|
The slow jet choice depends on your specific bike and your elevation. With a stock pipe near sea level, I'd stick with a 25. With a free-flowing muffler, try a 30. Whatever your bike needs to start quickly and idle smoothly.
Another way to look at it is if the pilot mixture screw needs to be backed out more that two full turns, your slow jet is too small. Remove the slow jet and main jet from your carb and then hit www.jetsrus.com. Compare the jets from your Mikuni to the jets in the pictures, and ensure that the measurements match. Once you've found a match, you'll learn what the numerical designation is for your jets, and which point you can shop at www.jetsrus.com or eBay.
__________________
Weldangrind "I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer |
|
01-31-2015, 08:15 PM | #35 |
Join Date: Jan 2015
Location: Texas
Posts: 32
|
Mine came with a 20 and a 100. Needle has not been touched starts with a quick bump of the starter or 1 -2 kicks, I'm leaving mine like it is for now.
__________________
If you're gonna go, go with a smile. (The Joker) |
|
01-31-2015, 08:48 PM | #36 |
Join Date: Jan 2015
Posts: 36
|
hey Gr8rcher
hows the bike run now ever since the valves were adjusted and the new carb? |
|
01-31-2015, 09:41 PM | #37 |
Join Date: Jan 2015
Location: Texas
Posts: 32
|
Couldn't be happier
__________________
If you're gonna go, go with a smile. (The Joker) |
|
02-01-2015, 12:32 PM | #38 |
Join Date: Mar 2009
Location: Sardis, BC, Canada
Posts: 25,977
|
Awesome! I'm glad that worked out for you. You'll now have the ability to change jets if you make changes to the intake and exhaust.
__________________
Weldangrind "I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer |
|
02-01-2015, 05:38 PM | #39 |
Join Date: May 2006
Location: Yuma, Arizona
Posts: 9,056
|
Have you ordered/installed the front sprockets?
__________________
"They say that life's a carousel, spinning fast you got to ride it well..." TGB Delivery Scooter 150 TMEC 200 Enduro--carcass is sadly rotting in the backyard |
|
02-02-2015, 05:29 PM | #40 |
Join Date: Jan 2015
Posts: 36
|
i did install a new front sprocket. i went with a 12 tooth
the original one was a 14 tooth. Big difference it bottom end |
|
02-02-2015, 06:56 PM | #41 |
Join Date: Mar 2009
Location: Sardis, BC, Canada
Posts: 25,977
|
I'll bet it climbs any hill you point it at.
__________________
Weldangrind "I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer |
|
02-02-2015, 10:05 PM | #42 |
Join Date: Jan 2015
Posts: 36
|
i hope lol. Stillwaiting for the spring this ny weather is killing me.
I should be getting my new 30mm muniki carb in like you suggested any day now. Cant wait to install that. |
|
02-05-2015, 09:09 AM | #43 |
Join Date: Jan 2015
Location: Texas
Posts: 32
|
FedEx Smartpost Sucks it took 6 days to get my carb, from Cali to TX usually takes 2-3 for a USPS package to arrive.
__________________
If you're gonna go, go with a smile. (The Joker) |
|
02-05-2015, 10:44 PM | #44 |
Join Date: Jan 2015
Posts: 36
|
yes took for ever. Got it today finally lol
Prob sat or sunday ill install it. Sucks because its going to snow sunday and monday now i can't even test it lol my luck. |
|
02-09-2015, 04:03 PM | #45 |
Join Date: Jan 2015
Posts: 24
|
hello, nice bike! how is the carb working out for you?
|
|
|
|
|
|