Zongshen RX3 Parts Cross Reference: Please Contribute! - Page 3

bogieboy · 12-08-2015, 07:51 AM

he very well may have done like i did... i went new perches and all on my roketa.... cant argue with $45 from ebay...

keithmaine · 12-08-2015, 08:13 AM

Quote:

Originally Posted by bogieboy

he very well may have done like i did... i went new perches and all on my roketa.... cant argue with $45 from ebay...

like these perhaps

http://www.ebay.com/itm/7-8-22mm-Bra...FVn3mz&vxp=mtr

or these
http://www.ebay.com/itm/Gold-7-8-Bra...tV9QLF&vxp=mtr

SpudRider · 12-12-2015, 09:25 AM

The HiFlow filter website lists the dimensions of all their oil filters. If anyone wishes to search the catalog, he might be able to find an equivalent oil filter for the RX3.

http://www.hiflofiltro.com/catalogue

SpudRider · 12-12-2015, 05:00 PM

The people at CSC are always very helpful.

I just talked to Gerry in the service department, and he told me the thread for the radiator fan switch is 16 mm in diameter. These switches will occasionally fail, so It's good to have a spare switch on hand. However, these switches are always sold with the complete radiator, rather than alone.

I believe the following, radiator fan switch is equivalent to the switch employed by the Zongshen RX3. It is a switch designed for the following Suzuki and Kawasaki motorcycles.

Suzuki

GSX-R600 97-05
GSX-R750 96-08
VL/VZ800 01-11
DL1000 V-Strom 03-09
GSX-R1000 01-04
SV1000 03-07
TL1000R/S 98-03
GSX-R1300 “Hayabusa” 99-07

Kawasaki

Ninja ZX-6R 2003-2004
ZX636 2003-2004
ZX600 2003-2004

http://www.ebay.com/sch/i.html?_from...witch&_sacat=0

Weldangrind · 12-12-2015, 06:44 PM

Does the connector look the same to you, Spud?

SpudRider · 12-12-2015, 07:24 PM

Quote:

Originally Posted by Weldangrind

Does the connector look the same to you, Spud?

Yes it does.

Here are some photos of the connector from the CSC website.

SpudRider · 12-13-2015, 06:18 AM

It seems the Delphi 28086011, Delco 12232201 MAP sensor is equivalent to the MAP/MAT sensor of the Zongshen RX3. Just make sure you get a 4-pin connector (MAT). It's best if the sensor has a sticker which labels the 4 pins: VOut, 5V, MAT, GND.

http://www.ebay.com/sch/sis.html?_nk...p2047675.m4096

SpudRider · 12-17-2015, 02:53 PM

It seems the solenoid purge valve for the evaporative emissions canister is the Delphi 1997278, ACDelco 214-641 unit.

http://www.ebay.com/itm/Evaporative-...3D130848197922

humanbeing · 03-14-2016, 09:53 AM

Stock front brake pad IS CD-F544 http://www.chinamomt.com/product1.php?page=19#
A：94.2×33.2×8 | B：94.2×33.2×8

Lee R · 03-15-2016, 06:53 PM

You guys are awesome. Thanks for all the research finding compatible parts!

detours · 04-13-2016, 05:43 PM

The Shorai LFX19A4-BS12 lithium iron battery is a good fit for the RX3 battery box. The length and width fit exactly and it comes with foam spacers to prevent vertical movement. It's a 19 amp-hour battery with 285 CCA.

detours · 08-09-2016, 04:37 PM

The shifter lever from a KLX250 is almost an exact fit. You can find them with a folding tip for under $30.

The XR650 shift lever also fits, but FYI the aftermarket ones are a bit longer ... better for bigger feet/boots.

detours · 08-22-2016, 04:02 PM

The front sprocket from a DR250/350 will fit. It comes in 13T, 14T and 15T.

Jay In Milpitas · 08-22-2016, 08:33 PM

Quote:

Originally Posted by detours

The front sprocket from a DR250/350 will fit. It comes in 13T, 14T and 15T.

Thanks Joel! Is that a true fit, or just *good enough* fit?

detours · 08-23-2016, 02:33 AM

Quote:

Originally Posted by Jay In Milpitas

Thanks Joel! Is that a true fit, or just *good enough* fit?

I don't know for sure ... I haven't tried it myself. But I saw it in a Facebook comment, so it must be true!

12-12-2015, 09:25 AM	#33
SpudRider Join Date: Jul 2008 Location: Idaho Posts: 25,054	The HiFlow filter website lists the dimensions of all their oil filters. If anyone wishes to search the catalog, he might be able to find an equivalent oil filter for the RX3. http://www.hiflofiltro.com/catalogue __________________ Spud "Never argue with an idiot. He will drag you down to his level, and beat you with experience." Mark Twain 2015 Zongshen ZS250GY-3 (RX3) 2006 Zongshen ZS200GY-2 (Sierra 200) 2005 Honda XR650L 2004 Honda CRF250X 1998 Kawasaki KDX220 Mods made to my Zongshen ZS200GY-2: http://www.chinariders.net/showthread.php?t=6894
	1

12-12-2015, 05:00 PM	#34
SpudRider Join Date: Jul 2008 Location: Idaho Posts: 25,054	The people at CSC are always very helpful. I just talked to Gerry in the service department, and he told me the thread for the radiator fan switch is 16 mm in diameter. These switches will occasionally fail, so It's good to have a spare switch on hand. However, these switches are always sold with the complete radiator, rather than alone. I believe the following, radiator fan switch is equivalent to the switch employed by the Zongshen RX3. It is a switch designed for the following Suzuki and Kawasaki motorcycles. Suzuki GSX-R600 97-05 GSX-R750 96-08 VL/VZ800 01-11 DL1000 V-Strom 03-09 GSX-R1000 01-04 SV1000 03-07 TL1000R/S 98-03 GSX-R1300 “Hayabusa” 99-07 Kawasaki Ninja ZX-6R 2003-2004 ZX636 2003-2004 ZX600 2003-2004 http://www.ebay.com/sch/i.html?_from...witch&_sacat=0 __________________ Spud "Never argue with an idiot. He will drag you down to his level, and beat you with experience." Mark Twain 2015 Zongshen ZS250GY-3 (RX3) 2006 Zongshen ZS200GY-2 (Sierra 200) 2005 Honda XR650L 2004 Honda CRF250X 1998 Kawasaki KDX220 Mods made to my Zongshen ZS200GY-2: http://www.chinariders.net/showthread.php?t=6894 Last edited by SpudRider; 12-13-2015 at 06:20 AM.
	2

12-12-2015, 06:44 PM	#35
Weldangrind Join Date: Mar 2009 Location: Sardis, BC, Canada Posts: 25,977	Does the connector look the same to you, Spud? __________________ Weldangrind "I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer
	0

12-13-2015, 06:18 AM	#37
SpudRider Join Date: Jul 2008 Location: Idaho Posts: 25,054	It seems the Delphi 28086011, Delco 12232201 MAP sensor is equivalent to the MAP/MAT sensor of the Zongshen RX3. Just make sure you get a 4-pin connector (MAT). It's best if the sensor has a sticker which labels the 4 pins: VOut, 5V, MAT, GND. http://www.ebay.com/sch/sis.html?_nk...p2047675.m4096 __________________ Spud "Never argue with an idiot. He will drag you down to his level, and beat you with experience." Mark Twain 2015 Zongshen ZS250GY-3 (RX3) 2006 Zongshen ZS200GY-2 (Sierra 200) 2005 Honda XR650L 2004 Honda CRF250X 1998 Kawasaki KDX220 Mods made to my Zongshen ZS200GY-2: http://www.chinariders.net/showthread.php?t=6894
	1

12-17-2015, 02:53 PM	#38
SpudRider Join Date: Jul 2008 Location: Idaho Posts: 25,054	It seems the solenoid purge valve for the evaporative emissions canister is the Delphi 1997278, ACDelco 214-641 unit. http://www.ebay.com/itm/Evaporative-...3D130848197922 __________________ Spud "Never argue with an idiot. He will drag you down to his level, and beat you with experience." Mark Twain 2015 Zongshen ZS250GY-3 (RX3) 2006 Zongshen ZS200GY-2 (Sierra 200) 2005 Honda XR650L 2004 Honda CRF250X 1998 Kawasaki KDX220 Mods made to my Zongshen ZS200GY-2: http://www.chinariders.net/showthread.php?t=6894
	1

12-08-2015, 07:51 AM	#31
bogieboy Join Date: May 2013 Location: finger lakes NY Posts: 2,061	he very well may have done like i did... i went new perches and all on my roketa.... cant argue with $45 from ebay...
	0

03-14-2016, 09:53 AM	#39
humanbeing Join Date: Mar 2008 Posts: 2,436	Stock front brake pad IS CD-F544 http://www.chinamomt.com/product1.php?page=19# A：94.2×33.2×8 \| B：94.2×33.2×8 __________________ Last edited by humanbeing; 03-14-2016 at 05:43 PM.
	1

03-15-2016, 06:53 PM	#40
Lee R Join Date: Aug 2015 Location: Upstate NY Posts: 343	You guys are awesome. Thanks for all the research finding compatible parts!
	0

04-13-2016, 05:43 PM	#41
detours Join Date: Sep 2014 Location: Arvada, CO Posts: 1,004	The Shorai LFX19A4-BS12 lithium iron battery is a good fit for the RX3 battery box. The length and width fit exactly and it comes with foam spacers to prevent vertical movement. It's a 19 amp-hour battery with 285 CCA. __________________ Red 5 standing by! 2015 CSC red RX3 with 19" front wheel, Shinko 804/805, skid plate, tall seat, 13T/45T sprockets, progressive shock, Winyoochanok windshield, GENSSI LED headlight, SW-Motech tankbag, Shorai Lithium battery 2014 Ural Patrol
	1

08-09-2016, 04:37 PM	#42
detours Join Date: Sep 2014 Location: Arvada, CO Posts: 1,004	The shifter lever from a KLX250 is almost an exact fit. You can find them with a folding tip for under $30. The XR650 shift lever also fits, but FYI the aftermarket ones are a bit longer ... better for bigger feet/boots. __________________ Red 5 standing by! 2015 CSC red RX3 with 19" front wheel, Shinko 804/805, skid plate, tall seat, 13T/45T sprockets, progressive shock, Winyoochanok windshield, GENSSI LED headlight, SW-Motech tankbag, Shorai Lithium battery 2014 Ural Patrol
	1

08-22-2016, 04:02 PM	#43
detours Join Date: Sep 2014 Location: Arvada, CO Posts: 1,004	The front sprocket from a DR250/350 will fit. It comes in 13T, 14T and 15T. __________________ Red 5 standing by! 2015 CSC red RX3 with 19" front wheel, Shinko 804/805, skid plate, tall seat, 13T/45T sprockets, progressive shock, Winyoochanok windshield, GENSSI LED headlight, SW-Motech tankbag, Shorai Lithium battery 2014 Ural Patrol
	1