What did you BUY today? - Page 258

**cheesy** · 03-23-2024, 12:57 PM

Quote:

Originally Posted by TominMO

So you essentially bought an open-air outhouse?

I'm jealous. My grandsons' have a designated pee tree in their backyard. If I step out to take a leak behind the barn, I'd probably get arrested.

dirtbkr188 · 03-23-2024, 05:52 PM

Something to consider on the new lot...

bigdano711 · 03-23-2024, 06:37 PM

Picked up a couple sets of these. Will I need to use the infamous o-ring or toss it? Oh, I started a leak by "fanagling" the JFG pipe on....such a n00b

https://motocultparts.com/products/6...41417402187975

TominMO · 03-23-2024, 07:21 PM

Quote:

Originally Posted by cheesy

I'm jealous. My grandsons' have a designated pee tree in their backyard. If I step out to take a leak behind the barn, I'd probably get arrested.

When I'm out i my garage (not connected to the house) and don't want to bother with going back inside, I use a plastic coffee can to pee in, then dump it outside. I'm sure no one has ever thought of this before.....

superjocko · 03-24-2024, 12:54 AM

Adjustable levers with the matching front master cylinder. Thanks to those that suggested them!

**cheesy** · 03-24-2024, 09:52 AM

Not bought, but given to me by my daughter and SIL. A HobbyZone Duet RC plane and a Moebius Models 1954 Hudson model kit.

I have a small RC copter I haven't flown since my last surgery and I sucked as a chopper pilot...many died. The weather looks to be blah this week, so no flying the plane for a while.

I went through the model kit and it's going to be somewhat of a challenge, though less so than the 1:35 scale sidecar rigs I was building before the unpleasantness of February 8th. Very detailed, very well designed, and I don't ever recall getting a model kit with full color instructions. I think 1954 was the last of the real Hudsons. They became re-badged Nashes in 1955.

There are a half dozen kits in front of it, so it will be awhile before I can get to building it.

2LZ · 03-24-2024, 01:43 PM

25' of metal fuel line and various fittings. I'm converting the Corvair to electric fuel pump and the Corvair Guys say "NO RUBBER LINES IN THE ENGINE COMPARTMENT!!!"....even though Chevy did it. Fine. I'll play.

Thumper · 03-24-2024, 07:14 PM

Quote:

Originally Posted by TominMO

So you essentially bought an open-air outhouse?

I bought an open air outhouse. Actually, just the ABS seat, which fits nicely on a 5 gallon paint can. Ultralight, ultraportable, perfect travelling accessory. Under $7 including tax. Bags, paper not included.

Portable.JPG

GypsyR · 03-25-2024, 11:06 AM

Been eyeing one of those "JFG Racing" replacement exhausts for my Templar but I'm not 100% sure one will fit my engine. Versus a Hawk or TBR7. There's even one for sale on here. But a local auction site I lurk on had one. Looks new in box. I bid and won it for $33. Going price is $98 on Amazon. Going to pick it up tomorrow and will find out if I wasted $33 or not maybe this weekend.

**cheesy** · 03-25-2024, 08:17 PM

My tire finally got here. It took 5 days to walk it from Cedar Rapids, IA to Elburn, IL. I can drive that, round trip, in about 6 hours. It wasn't the seller, it was USPS.

Mrs. C was looking out the living room window and called me to watch as our substitute mail carrier tried to deliver it to the wrong address three times.

TominMO · 03-25-2024, 10:08 PM

Quote:

Originally Posted by cheesy

My tire finally got here. It took 5 days to walk it from Cedar Rapids, IA to Elburn, IL. I can drive that, round trip, in about 6 hours. It wasn't the seller, it was USPS.

Mrs. C was looking out the living room window and called me to watch as our substitute mail carrier tried to deliver it to the wrong address three times.

This may be a helpful explanation:

**cheesy** · 03-25-2024, 10:18 PM

Quote:

Originally Posted by TominMO

This may be a helpful explanation:

My Mom worked for the post office from the 60s to the early 90s, starting as a rural carrier and ending her career as a Post Master. She'd probably say the video was putting a shine on reality.

TominMO · 03-26-2024, 09:04 AM

My ex-BIL and ex-SIL work for the post office. He's highly intelligent but she's--not so much.

Aussie_in_MO · 03-26-2024, 09:37 AM

Ordered some new head bolts and a steel oil separator plate for my mid 90's JDM Subaru engine rebuild project.

**JerryHawk250** · 03-28-2024, 08:54 AM

New motorcycle, maybe two. To be continued........

03-23-2024, 06:37 PM	#3858
bigdano711 Join Date: Jun 2023 Location: Big Piney, WY Posts: 617	Picked up a couple sets of these. Will I need to use the infamous o-ring or toss it? Oh, I started a leak by "fanagling" the JFG pipe on....such a n00b https://motocultparts.com/products/6...41417402187975 __________________ 2023 Hawk 250 from XPRO off of Amazon MOUNTAIN MAN RC + MOTO on YouTube "If there were more bloody noses, there would be less wars." - Hagbard Celine John 2:15 So He made a whip out of cords and drove all from the temple area, both sheep and cattle; He scattered the coins of the money changers and overturned their tables.
	1

03-24-2024, 12:54 AM	#3860
superjocko Join Date: Aug 2022 Location: Lincoln CA Posts: 134	Adjustable levers with the matching front master cylinder. Thanks to those that suggested them! __________________ -2024 CSC TT250, stage 3 motocult kit, Nibbi PE28FL with custom-made cable controlled choke, modified stock muffler (larger diameter tailpipe), custom oil cooler installation with relocated stock evaporative emissions canister, oversized stainless steel footpegs, IMS folding tip shifter, a few little blingy bolts and bits. More personal preference mods to come.
	1

03-24-2024, 09:52 AM	#3861
cheesy Moderator Join Date: Jul 2010 Location: Elburn, IL Posts: 5,977	Not bought, but given to me by my daughter and SIL. A HobbyZone Duet RC plane and a Moebius Models 1954 Hudson model kit. I have a small RC copter I haven't flown since my last surgery and I sucked as a chopper pilot...many died. The weather looks to be blah this week, so no flying the plane for a while. I went through the model kit and it's going to be somewhat of a challenge, though less so than the 1:35 scale sidecar rigs I was building before the unpleasantness of February 8th. Very detailed, very well designed, and I don't ever recall getting a model kit with full color instructions. I think 1954 was the last of the real Hudsons. They became re-badged Nashes in 1955. There are a half dozen kits in front of it, so it will be awhile before I can get to building it. __________________ Cheesy ______________________________________ 07 Hi Bird Enduro-Flown the Coop 07 Ural Gear Up 79 Honda CX500 77 VeloSolex 4600 V3 73 VeloSolex 3800 I'm making this up as I go.-Indiana Jones Telling me something 'is for my own good', is a fast way to a fat lip.-Me I don't even care about my own problems, why should I care about yours?-Quote on one of my favorite t-shirts
	2

03-24-2024, 01:43 PM	#3862
2LZ Join Date: Mar 2010 Location: Volcano, Ca Posts: 7,112	25' of metal fuel line and various fittings. I'm converting the Corvair to electric fuel pump and the Corvair Guys say "NO RUBBER LINES IN THE ENGINE COMPARTMENT!!!"....even though Chevy did it. Fine. I'll play. __________________ "Light a fire for a man, and you heat him for a day. Light a man on fire, and you heat him for the rest of his life." 2007 Suzuki DRZ400S (SM convert) 2009 Q Link XP 200 1967 BSA B25 250cc Starfire 2022 Royal Enfield Interceptor 650 2023 Royal Enfield Scram 411 1948 Royal Enfield Model G 350
	3

03-25-2024, 08:17 PM	#3865
cheesy Moderator Join Date: Jul 2010 Location: Elburn, IL Posts: 5,977	My tire finally got here. It took 5 days to walk it from Cedar Rapids, IA to Elburn, IL. I can drive that, round trip, in about 6 hours. It wasn't the seller, it was USPS. Mrs. C was looking out the living room window and called me to watch as our substitute mail carrier tried to deliver it to the wrong address three times. __________________ Cheesy ______________________________________ 07 Hi Bird Enduro-Flown the Coop 07 Ural Gear Up 79 Honda CX500 77 VeloSolex 4600 V3 73 VeloSolex 3800 I'm making this up as I go.-Indiana Jones Telling me something 'is for my own good', is a fast way to a fat lip.-Me I don't even care about my own problems, why should I care about yours?-Quote on one of my favorite t-shirts
	2

03-23-2024, 05:52 PM	#3857
dirtbkr188 Join Date: Aug 2009 Posts: 574	Something to consider on the new lot...
	2

03-25-2024, 11:06 AM	#3864
GypsyR Join Date: Feb 2023 Location: Upstate SC Posts: 340	Been eyeing one of those "JFG Racing" replacement exhausts for my Templar but I'm not 100% sure one will fit my engine. Versus a Hawk or TBR7. There's even one for sale on here. But a local auction site I lurk on had one. Looks new in box. I bid and won it for $33. Going price is $98 on Amazon. Going to pick it up tomorrow and will find out if I wasted $33 or not maybe this weekend.
	2

03-26-2024, 09:04 AM	#3868
TominMO Join Date: Sep 2021 Location: De Soto, MO Posts: 1,976	My ex-BIL and ex-SIL work for the post office. He's highly intelligent but she's--not so much. __________________ 2021 Lifan Xpect--sold 2022 Lifan KPX 1972 Honda CT90--The Carrot 1969 Honda CT90--The Tomahto Cheesy is the WDK (workplace drama king). Now retired. Nope, back in the saddle. Nope, finally retired. Climate: The Movie https://www.youtube.com/watch?v=A24fWmNA6lM How our government really works https://www.youtube.com/watch?v=QjadCd0VRBw Question all authority.....think for yourself
	0

03-26-2024, 09:37 AM	#3869
Aussie_in_MO Join Date: Feb 2024 Location: SW Missouri Posts: 195	Ordered some new head bolts and a steel oil separator plate for my mid 90's JDM Subaru engine rebuild project. __________________ ---------- 2023 Templar X 2009 Triumph Bonneville 1976 Yamaha DT175 1974 Honda MT125
	1

03-28-2024, 08:54 AM	#3870
JerryHawk250 Moderator Join Date: Oct 2016 Location: Houma, La. Posts: 11,713	New motorcycle, maybe two. To be continued........ __________________ 2024 Linhai 300 ATV 4x4 2023 Lifan Lycan 250 Chopper 2023 Venom Evader 2022 Lifan KPX250 2020 Kawasaki Vulcan S (Sold) 2004 Honda ST 1300 2016 Black Hawk 250 (sold) Keihin PE30 carb,125 main,38 slow.Pod filter,ported & decked head 10:1 CR,Direct Ignition Coil,15/40Sprockets,NGK DPR8EIX-9,De-Cat,Dual Oil Cooler,Digital Cluster 2016 Cazador180 XL 2014 Coolster150 JerryHawk250.com My YouTube Channel
	4