What did you BUY today? - Page 255

2LZ · 03-02-2024, 03:55 PM

Quote:

Originally Posted by Thumper

Lots of skis hitting the slopes! Iditarod attendees are probably happy they are well North of the worst of this!!

My truck driver buddy did the 80/50 loop to Reno and back a couple days ago and he said all the resorts are already closed and blasting for avalanche control. As soon as they reopen, the state may flip on its side from all the skiers running east!

Bruces · 03-02-2024, 05:51 PM

My son is in Souix falls North Dakota wrenching on team Ski Doo snowcross sleds ,and they are racing in mud .They should have moved it to 2LZ’s neck of the woods .

**cheesy** · 03-03-2024, 07:51 AM

I finished the 12vdc power supply yesterday while Mrs.C was in Wisconsin at a baby shower.

Not a bad little unit. Not a great little unit. Save for the IC chip and the PCB, I probably had all the components on hand. As you can see, a 0.01v difference at the HF DVOM. The unit is pretty stable up to 13V, then it flutters quite a bit. What wasn't done in the design is an On-Off switch. I'll fix that in the future.

Do©Hawk · 03-03-2024, 06:50 PM

A set of SAE and Metric bolt busters......a little while later, screw/bolt extractors in 2 different sizes and a 6 pack of beer to either drown my sorrows or celebrate my accomplishment.

I was trying to help my son fix his car. After I had him buy a series of parts that should have been a relatively easy repair, I failed miserably. Not a happy camper. I stopped before I did too much damage to drive the car. Now I have to find a mechanic that will use the parts I already sourced and deal with the bolts that couldn't get and boogered up in the process. FML!

Bruces · 03-05-2024, 08:43 PM

I bought some Buckley’s ,still tastes awefull ,hopefully it still works .

GypsyR · 03-06-2024, 09:40 AM

One of these bike carriers to put on the back of our RV.
https://www.vevor.com/hitch-motorcyc...xoCJ84QAvD_BwE
Assembled and it seems OK. Will have to wait quite a while before I find out if I can load the bike on it. I may need a longer ramp but I feel like I can extend it a bit. The downs for the ramp I think are very sketchy for long trips. I'm going to do some kind of backup with pins and clips I think.
There's an almost identical one on Amazon for like $90 now but oh well. Bought some transmission tools and PDR kit from Vevor too.

Sport Rider · 03-06-2024, 03:05 PM

bought a used Garmin Zumo 396 from an inmate at ADVRider. Hopefully will work better than my old 1355 that keeps shutting off.

Sport Rider · 03-06-2024, 03:13 PM

bought this Bell MX 9 Adventure and a Sena R50 headset to go with it.

**cheesy** · 03-07-2024, 01:04 PM

An ebay bicycle seat from bikergirlhouma in Jerry's backyard.

GypsyR · 03-07-2024, 01:27 PM

When order stuff online do you count it when you order it or when it arrives?

Anyway. K'Hermit bought a padded seat cover that he says is cushier. I took a shot and mine just fell off the UPS truck. Knowing it was on the way and that my old staple guns suck, I was on the lookout for an upgrade. So happens I spotted a Arrow air operated one at a local and scored it. Going to pick it up tonight with fingers crossed that it actually works. All that will be left is stealing the time to swap the seats out. I hope.

**cheesy** · 03-07-2024, 01:37 PM

Quote:

Originally Posted by GypsyR

When order stuff online do you count it when you order it or when it arrives?

When I hit the 'Buy it now' button because the money is spent.

Do©Hawk · 03-08-2024, 03:02 PM

Quote:

Originally Posted by GypsyR

When order stuff online do you count it when you order it or when it arrives?

I go with when it arrives. It's just not official til I've got it in my hand.

Bruces · 03-08-2024, 03:42 PM

The thread title is what did you buy today ,says nothing of what you received ,as per forum rules anybody posting sh1t they received are in breach and must provide us with great workplace drama like Cheesy did for the past several years .

**cheesy** · 03-08-2024, 03:47 PM

Mrs.C and I went to Menard's this morning, just to get out of the house.

I was wandering around and found a lonely bottle of Oatey Thread Cutting Oil. I said to myself, "Self, there ain't much Tap Magic Oil left in that can you 'borrowed' from work 10 years ago. You should buy that bottle of cutting oil cuz you have a lathe now."

So I did.

dirtbkr188 · 03-08-2024, 04:30 PM

This stuff?

That's pretty neat, it comes in an old looking can, kinda goes with having an old lathe...

03-03-2024, 07:51 AM	#3813
cheesy Moderator Join Date: Jul 2010 Location: Elburn, IL Posts: 5,974	I finished the 12vdc power supply yesterday while Mrs.C was in Wisconsin at a baby shower. Not a bad little unit. Not a great little unit. Save for the IC chip and the PCB, I probably had all the components on hand. As you can see, a 0.01v difference at the HF DVOM. The unit is pretty stable up to 13V, then it flutters quite a bit. What wasn't done in the design is an On-Off switch. I'll fix that in the future. __________________ Cheesy ______________________________________ 07 Hi Bird Enduro-Flown the Coop 07 Ural Gear Up 79 Honda CX500 77 VeloSolex 4600 V3 73 VeloSolex 3800 I'm making this up as I go.-Indiana Jones Telling me something 'is for my own good', is a fast way to a fat lip.-Me I don't even care about my own problems, why should I care about yours?-Quote on one of my favorite t-shirts
	1

03-03-2024, 06:50 PM	#3814
Do©Hawk Join Date: Oct 2023 Location: Western PA Posts: 308	A set of SAE and Metric bolt busters......a little while later, screw/bolt extractors in 2 different sizes and a 6 pack of beer to either drown my sorrows or celebrate my accomplishment. I was trying to help my son fix his car. After I had him buy a series of parts that should have been a relatively easy repair, I failed miserably. Not a happy camper. I stopped before I did too much damage to drive the car. Now I have to find a mechanic that will use the parts I already sourced and deal with the bolts that couldn't get and boogered up in the process. FML! __________________ 2022 Hawk DLX EFI * 17T Front / 47T Rear / 428 x-ring chain * Kenda K-760 front + rear * Banjo brake light switch * LED headlight + front turn signals * Custom cutting board skid plate * Debadged (I don't like to brag about the superior strength!) * Top speed, GPS verified, as equipped: 68 mph (so far)
	0

03-06-2024, 03:05 PM	#3817
Sport Rider Join Date: Jan 2016 Location: Mooresville NC Posts: 2,116	bought a used Garmin Zumo 396 from an inmate at ADVRider. Hopefully will work better than my old 1355 that keeps shutting off. __________________ Dave Bikes I've owned: Suzuki GS450T, Yamaha XS500, Honda V45 Sabre, Kawasaki Vulcan 1500 Classic (2), Suzuki VX800, Kawasaki Ninja 650, Triumph TT600, Honda Superhawk, Kawasaki Concours 1000 (3, including a sidecar rig), Buell XB9R, Kawasaki Nomad 1500, Concours 14, Honda Goldwing (2), Housen Hawk, Suzuki Intruder 1400, Kawasaki KLR650, Victory V92TC.
	3

03-07-2024, 01:04 PM	#3819
cheesy Moderator Join Date: Jul 2010 Location: Elburn, IL Posts: 5,974	An ebay bicycle seat from bikergirlhouma in Jerry's backyard. __________________ Cheesy ______________________________________ 07 Hi Bird Enduro-Flown the Coop 07 Ural Gear Up 79 Honda CX500 77 VeloSolex 4600 V3 73 VeloSolex 3800 I'm making this up as I go.-Indiana Jones Telling me something 'is for my own good', is a fast way to a fat lip.-Me I don't even care about my own problems, why should I care about yours?-Quote on one of my favorite t-shirts
	1

03-08-2024, 03:47 PM	#3824
cheesy Moderator Join Date: Jul 2010 Location: Elburn, IL Posts: 5,974	Mrs.C and I went to Menard's this morning, just to get out of the house. I was wandering around and found a lonely bottle of Oatey Thread Cutting Oil. I said to myself, "Self, there ain't much Tap Magic Oil left in that can you 'borrowed' from work 10 years ago. You should buy that bottle of cutting oil cuz you have a lathe now." So I did. __________________ Cheesy ______________________________________ 07 Hi Bird Enduro-Flown the Coop 07 Ural Gear Up 79 Honda CX500 77 VeloSolex 4600 V3 73 VeloSolex 3800 I'm making this up as I go.-Indiana Jones Telling me something 'is for my own good', is a fast way to a fat lip.-Me I don't even care about my own problems, why should I care about yours?-Quote on one of my favorite t-shirts
	2

03-02-2024, 05:51 PM	#3812
Bruces Join Date: May 2018 Posts: 1,649	My son is in Souix falls North Dakota wrenching on team Ski Doo snowcross sleds ,and they are racing in mud .They should have moved it to 2LZ’s neck of the woods .
	2

03-05-2024, 08:43 PM	#3815
Bruces Join Date: May 2018 Posts: 1,649	I bought some Buckley’s ,still tastes awefull ,hopefully it still works .
	2

03-06-2024, 09:40 AM	#3816
GypsyR Join Date: Feb 2023 Location: Upstate SC Posts: 339	One of these bike carriers to put on the back of our RV. https://www.vevor.com/hitch-motorcyc...xoCJ84QAvD_BwE Assembled and it seems OK. Will have to wait quite a while before I find out if I can load the bike on it. I may need a longer ramp but I feel like I can extend it a bit. The downs for the ramp I think are very sketchy for long trips. I'm going to do some kind of backup with pins and clips I think. There's an almost identical one on Amazon for like $90 now but oh well. Bought some transmission tools and PDR kit from Vevor too.
	2

03-07-2024, 01:27 PM	#3820
GypsyR Join Date: Feb 2023 Location: Upstate SC Posts: 339	When order stuff online do you count it when you order it or when it arrives? Anyway. K'Hermit bought a padded seat cover that he says is cushier. I took a shot and mine just fell off the UPS truck. Knowing it was on the way and that my old staple guns suck, I was on the lookout for an upgrade. So happens I spotted a Arrow air operated one at a local and scored it. Going to pick it up tonight with fingers crossed that it actually works. All that will be left is stealing the time to swap the seats out. I hope.
	1

03-08-2024, 03:42 PM	#3823
Bruces Join Date: May 2018 Posts: 1,649	The thread title is what did you buy today ,says nothing of what you received ,as per forum rules anybody posting sh1t they received are in breach and must provide us with great workplace drama like Cheesy did for the past several years .
	1

03-08-2024, 04:30 PM	#3825
dirtbkr188 Join Date: Aug 2009 Posts: 573	This stuff? That's pretty neat, it comes in an old looking can, kinda goes with having an old lathe...
	3