New Zongshen RX3 (ZS250GY-3) Dual Sport - Page 213

fishman10 · 04-26-2015, 07:24 PM

adjusted the clutch a little ,nuetral easier to find now, the stock tread is about perfect for me as i only usually ride pavement and gravel state forest roads,so i need to find something like them,,the more i ride it the more i like this bike!!!tried to get some photos and the batteries were dead in cam, dang it.

Belamoto · 04-26-2015, 08:09 PM

Is it just me or does anyone else find it a little annoying that the side stand doesn't stay down on its own? Maybe I'm too used to my BMW but that does have an idiot switch.

detours · 04-26-2015, 08:14 PM

Can anyone with an RX3 confirm if there is a hole in the triple tree suitable for a triple lift like this one?

If it has a pin hole, size is the next question, if anyone knows how to measure it.

pete · 04-26-2015, 09:39 PM

Quote:

Originally Posted by Belamoto

Is it just me or does anyone else find it a little annoying that the side stand doesn't stay down on its own? Maybe I'm too used to my BMW but that does have an idiot switch.

My GasGas had a stand like that... After it fell
over a few times I remembered about it...
but yer a real pain in the a$$

Belamoto · 04-26-2015, 10:07 PM

Quote:

Originally Posted by detours

Can anyone with an RX3 confirm if there is a hole in the triple tree suitable for a triple lift like this one?

If it has a pin hole, size is the next question, if anyone knows how to measure it.

Don't have calipers handy but a quick check with measuring tape puts it at about 15mm.

dieselrider · 04-26-2015, 10:15 PM

Quote:

Originally Posted by Belamoto

Is it just me or does anyone else find it a little annoying that the side stand doesn't stay down on its own? Maybe I'm too used to my BMW but that does have an idiot switch.

you might have an isolated issue...it's the first I've heard of it...mine stays down on it's own.

Belamoto · 04-26-2015, 10:34 PM

Quote:

Originally Posted by dieselrider

you might have an isolated issue...it's the first I've heard of it...mine stays down on it's own.

Does this look right to you? I suspect not. I'm sure the CSC guys would have sorted out any issues like this before shipping theirs but this RX3 came straight from the Zongshen factory.

detours · 04-26-2015, 11:02 PM

Quote:

Originally Posted by Belamoto

Don't have calipers handy but a quick check with measuring tape puts it at about 15mm.

Thank you!

fishman10 · 04-26-2015, 11:36 PM

fishman10 · 04-26-2015, 11:37 PM

dang it didnt work

fishman10 · 04-26-2015, 11:41 PM

dieselrider · 04-27-2015, 12:09 AM

Quote:

Originally Posted by Belamoto

Does this look right to you? I suspect not. I'm sure the CSC guys would have sorted out any issues like this before shipping theirs but this RX3 came straight from the Zongshen factory.

I left my bike at my office today because it started raining/sleeting...I'll look tomorrow, and let you know, but that doesn't look familiar to me.

SpudRider · 04-27-2015, 12:29 AM

Quote:

Originally Posted by Belamoto

Is it just me or does anyone else find it a little annoying that the side stand doesn't stay down on its own? Maybe I'm too used to my BMW but that does have an idiot switch.

Quote:

Originally Posted by Belamoto

Does this look right to you? I suspect not. I'm sure the CSC guys would have sorted out any issues like this before shipping theirs but this RX3 came straight from the Zongshen factory.

Your side stand is different from the one we received in the United States. My side stand employs one spring, and it doesn't have the crescent-shaped piece of metal. Also, the mounting pins for the spring are in different locations. I think forum member Katflap, in England, has a side stand similar to yours, and he modified it to make it work. If you search this thread for his post, you can find his solution. I don't have any problems with the side stand on my RX3 which was delivered to the United States.

SpudRider · 04-27-2015, 12:34 AM

Belamoto,

Here is a link to the post by Katflap which describes how he altered his side stand to make to work better.

http://www.chinariders.net/showpost....postcount=1726

Belamoto · 04-27-2015, 12:36 AM

Quote:

Originally Posted by SpudRider

Belamoto,

Here is a link to the post by Katflap which describes how he altered his side stand to make to work better.

http://www.chinariders.net/showpost....postcount=1726

Thanks Spud - appreciate that.

04-26-2015, 07:24 PM	#3181
fishman10 Join Date: Sep 2008 Location: central PA Posts: 770	new zong rx3 adjusted the clutch a little ,nuetral easier to find now, the stock tread is about perfect for me as i only usually ride pavement and gravel state forest roads,so i need to find something like them,,the more i ride it the more i like this bike!!!tried to get some photos and the batteries were dead in cam, dang it. __________________ 2015 zongshen rx3,,(Sold),,,2016 bashan storm,,2005 Harley ultra classic.
	0

04-26-2015, 08:09 PM	#3182
Belamoto Join Date: Apr 2015 Location: Auckland, New Zealand Posts: 19	Is it just me or does anyone else find it a little annoying that the side stand doesn't stay down on its own? Maybe I'm too used to my BMW but that does have an idiot switch. __________________ Martin 2015 Zongshen RX3 2012 BMW R1200GSA Web: belamoto.nz
	0

04-26-2015, 08:14 PM	#3183
detours Join Date: Sep 2014 Location: Arvada, CO Posts: 1,004	Can anyone with an RX3 confirm if there is a hole in the triple tree suitable for a triple lift like this one? If it has a pin hole, size is the next question, if anyone knows how to measure it. __________________ Red 5 standing by! 2015 CSC red RX3 with 19" front wheel, Shinko 804/805, skid plate, tall seat, 13T/45T sprockets, progressive shock, Winyoochanok windshield, GENSSI LED headlight, SW-Motech tankbag, Shorai Lithium battery 2014 Ural Patrol
	0

04-26-2015, 11:36 PM	#3189
fishman10 Join Date: Sep 2008 Location: central PA Posts: 770	test to see if i can still post photos <a href="http://s948.photobucket.com/user/fishman10/media/IMG_0634.jpg.html" target="_blank"><img src="http://i948.photobucket.com/albums/ad328/fishman10/IMG_0634.jpg" border="0" alt=" photo IMG_0634.jpg"/></a> __________________ 2015 zongshen rx3,,(Sold),,,2016 bashan storm,,2005 Harley ultra classic.
	0

04-26-2015, 11:37 PM	#3190
fishman10 Join Date: Sep 2008 Location: central PA Posts: 770	photo dang it didnt work __________________ 2015 zongshen rx3,,(Sold),,,2016 bashan storm,,2005 Harley ultra classic.
	0

04-26-2015, 11:41 PM	#3191
fishman10 Join Date: Sep 2008 Location: central PA Posts: 770	photo __________________ 2015 zongshen rx3,,(Sold),,,2016 bashan storm,,2005 Harley ultra classic.
	0

04-27-2015, 12:34 AM	#3194
SpudRider Join Date: Jul 2008 Location: Idaho Posts: 25,054	Belamoto, Here is a link to the post by Katflap which describes how he altered his side stand to make to work better. http://www.chinariders.net/showpost....postcount=1726 __________________ Spud "Never argue with an idiot. He will drag you down to his level, and beat you with experience." Mark Twain 2015 Zongshen ZS250GY-3 (RX3) 2006 Zongshen ZS200GY-2 (Sierra 200) 2005 Honda XR650L 2004 Honda CRF250X 1998 Kawasaki KDX220 Mods made to my Zongshen ZS200GY-2: http://www.chinariders.net/showthread.php?t=6894
	0