PZ30 Tuning - Page 2

OneLeggedRider · 06-20-2019, 01:00 PM

.45mm pilot 3 washers on needle 110 main and 2 turns out with performance exhaust. Runs excellent in chilly weather and I don't have choke it to start it.

NzBrakelathes · 06-20-2019, 04:39 PM

Quote:

Originally Posted by bikeman

Yes the stock 40 pilot jet. from what I read, it isnt replaceable on the shengwey. everything else stock, no mods. battery removed because i burned it out and it wont charge. I did replace the main 98 with a 100 jet on ebay. Think it was sold as a "mikuni". FWIW, it will start and stay running nicely, but it is a PITA to kickstart. Ive had other 4t dirtbikes that start on one kick, not this one. My procedure is half-throttle half-choke kick when cold, and full throttle kick no choke when hot. Doesn't always go though.

Here

https://rover.ebay.com/rover/0/0/0?m...2F303077495104

I’m in NJ tonight but near NYC I can only post from china next week

06-20-2019, 01:00 PM	#16
OneLeggedRider Join Date: Nov 2018 Location: Stockport, Oh. Posts: 1,442	.45mm pilot 3 washers on needle 110 main and 2 turns out with performance exhaust. Runs excellent in chilly weather and I don't have choke it to start it.
	0