03-04-2019, 03:37 PM | #16 |
Join Date: Feb 2019
Posts: 5
|
So what exhaust is this? Any other suggestions for hellcat?
|
|
03-04-2019, 08:15 PM | #17 |
Join Date: Jun 2018
Location: Florida
Posts: 759
|
Here is an EBaY link to the version I used https://www.ebay.com/itm/Stainless-S...72.m2749.l2649
There are others available on Ebay for a bit less money, i went with the full stainless because i hates rust lol. If you poke around on this forum a bit, you can find some additional links to this same basic exhaust .
__________________
2001 Mustang GT 2004 Sportster 2018 VADER 2020 Orion RXB250L |
|
03-06-2019, 12:18 AM | #18 |
Join Date: Aug 2018
Posts: 286
|
zs190 will be here fri. will have to sit until weather warms up some unfortunately, also another new exhaust GP1 from motokit.com. Will be installing new swing arm at some point. The list goes on and on.
__________________
2018 BD125-8-x21rs ZS190/Genuine PE28 Kepspeed GP1 Exhaust Protaper se x110 bars/grips 1/4 MotionPro throttle Kepspeed Braced swingarm Chimera rear hub assy Grom Intergrated tail light Superlite Sprockets 17/32 custom made from Japan Chimera Swing Arm Bolt RK MXZ Chain #420 All Balls wheel bearings Motodynamic fender eliminator Coremoto ss brake lines Composimo 2.5 lower link Grom Calipers-w/ebc pads/rotors Michelin tire 140&120 13x4/13x7 fatties Grom forks |
|
03-19-2019, 12:14 AM | #19 |
Join Date: Sep 2018
Posts: 403
|
Do you know if that pipe will work on the Hellcat? The exhaust port on mine tilts to the right. I can't tell if yours does too.
@RedCrowRides I'm glad I saw your post about the 115 main. I recently installed a VM22 and deleted the air box. It was not running right with the 110. Hopefully 115 will get it sorted. |
|
03-19-2019, 03:20 AM | #20 | |
Join Date: Sep 2018
Posts: 403
|
Quote:
Dang, I thought I could use the stock chain and just push the rear tire forward a bit. Three teeth make that much difference? |
|
|
03-19-2019, 11:11 AM | #21 |
Join Date: Jan 2019
Posts: 43
|
I put in a 17t front sprocket and didn’t need a bigger chain, stock one worked on a boom.
|
|
03-19-2019, 12:43 PM | #22 |
Join Date: Aug 2018
Posts: 286
|
It all depends, my bike was new when I put the 17th on , the tire was all the way forward, if your bike has some miles on it the chain would have stretched some. That's why no new chain was needed. The stock #420 stretches alot, I changed to a #428 for that reason.
Exhaust will fit on your bike.
__________________
2018 BD125-8-x21rs ZS190/Genuine PE28 Kepspeed GP1 Exhaust Protaper se x110 bars/grips 1/4 MotionPro throttle Kepspeed Braced swingarm Chimera rear hub assy Grom Intergrated tail light Superlite Sprockets 17/32 custom made from Japan Chimera Swing Arm Bolt RK MXZ Chain #420 All Balls wheel bearings Motodynamic fender eliminator Coremoto ss brake lines Composimo 2.5 lower link Grom Calipers-w/ebc pads/rotors Michelin tire 140&120 13x4/13x7 fatties Grom forks |
|
03-21-2019, 07:46 AM | #24 | |
Join Date: Aug 2018
Posts: 286
|
Quote:
__________________
2018 BD125-8-x21rs ZS190/Genuine PE28 Kepspeed GP1 Exhaust Protaper se x110 bars/grips 1/4 MotionPro throttle Kepspeed Braced swingarm Chimera rear hub assy Grom Intergrated tail light Superlite Sprockets 17/32 custom made from Japan Chimera Swing Arm Bolt RK MXZ Chain #420 All Balls wheel bearings Motodynamic fender eliminator Coremoto ss brake lines Composimo 2.5 lower link Grom Calipers-w/ebc pads/rotors Michelin tire 140&120 13x4/13x7 fatties Grom forks |
|
|
03-21-2019, 04:05 PM | #25 |
Join Date: Sep 2018
Posts: 403
|
I just got the 420 sprocket and compared it to the 428. The 428 is a bit thicker. I guessing if you had a 428 rear sprocket a 420 chain wouldn't fit or be really tight. IDK. It's raining out now but eventually I'll see how each one fits on the chain. If only I had something to measure the pin length and roller diameter I'd know for sure.
Update. I went out and inserted both sprockets into the chain and compared them to the rear sprocket. The rear sprocket is definitely 428, when I insert the 420 into the chain there is a lot of wiggle room. It doesn't look right. I'm guessing mine came with a 428 chain. |
|
03-21-2019, 10:24 PM | #26 |
Join Date: Aug 2018
Posts: 286
|
I could be wrong, maybe mine did come with a 428 chain
but I bought a new 428 chain w/ O rings when I changed sprockets.
__________________
2018 BD125-8-x21rs ZS190/Genuine PE28 Kepspeed GP1 Exhaust Protaper se x110 bars/grips 1/4 MotionPro throttle Kepspeed Braced swingarm Chimera rear hub assy Grom Intergrated tail light Superlite Sprockets 17/32 custom made from Japan Chimera Swing Arm Bolt RK MXZ Chain #420 All Balls wheel bearings Motodynamic fender eliminator Coremoto ss brake lines Composimo 2.5 lower link Grom Calipers-w/ebc pads/rotors Michelin tire 140&120 13x4/13x7 fatties Grom forks |
|
|
|
|
|