![]() |
#16 |
Join Date: May 2019
Location: Illinois
Posts: 864
|
Time to do the intake valve first, the clearance is supposed to .08mm and mine was spot on.
__________________
2022 Venom KPR 200 Red- the fastest color 16t and 46t sprockets, NGK Iridium CPR8EAIX-9, aftermarket full exhaust system. Top speed 81GPS 2023 Venom SS3 KP mini 150– Nibbi carb, Nibbi air filter, aftermarket muffler, decat 2022 Venom Ghost chopper 250 1997 Honda GL1500 Goldwing 1978 Kawasaki KL250 https://youtube.com/@herbiesgarage681 |
![]() |
![]() |
#17 |
Join Date: May 2019
Location: Illinois
Posts: 864
|
Next is exhaust, you have to move the radiator out of the way to access the service port. To move the radiator remove one bolt at the top and lift it up to clear the 2 pins out of the holes. Valve clearance is supposed to be .12mm and mine had almost nothing so I adjusted it to proper specs.
__________________
2022 Venom KPR 200 Red- the fastest color 16t and 46t sprockets, NGK Iridium CPR8EAIX-9, aftermarket full exhaust system. Top speed 81GPS 2023 Venom SS3 KP mini 150– Nibbi carb, Nibbi air filter, aftermarket muffler, decat 2022 Venom Ghost chopper 250 1997 Honda GL1500 Goldwing 1978 Kawasaki KL250 https://youtube.com/@herbiesgarage681 |
![]() |
![]() |
#18 |
Join Date: May 2019
Location: Illinois
Posts: 864
|
Here's a pic of the timing port
__________________
2022 Venom KPR 200 Red- the fastest color 16t and 46t sprockets, NGK Iridium CPR8EAIX-9, aftermarket full exhaust system. Top speed 81GPS 2023 Venom SS3 KP mini 150– Nibbi carb, Nibbi air filter, aftermarket muffler, decat 2022 Venom Ghost chopper 250 1997 Honda GL1500 Goldwing 1978 Kawasaki KL250 https://youtube.com/@herbiesgarage681 |
![]() |
![]() |
#19 |
Join Date: May 2019
Location: Illinois
Posts: 864
|
Just got back from a nice 150 mile ride. It was such a beautiful day today, sunny and 65 degrees with a slight breeze. I believe after the cat gutting job I have a little more top end power but time will tell. I'm thinking of doing a baffelectomy next. I'm not sure though because I like it quiet but I think it will help with the exhaust flow.
__________________
2022 Venom KPR 200 Red- the fastest color 16t and 46t sprockets, NGK Iridium CPR8EAIX-9, aftermarket full exhaust system. Top speed 81GPS 2023 Venom SS3 KP mini 150– Nibbi carb, Nibbi air filter, aftermarket muffler, decat 2022 Venom Ghost chopper 250 1997 Honda GL1500 Goldwing 1978 Kawasaki KL250 https://youtube.com/@herbiesgarage681 |
![]() |
![]() |
#20 |
Join Date: May 2019
Location: Illinois
Posts: 864
|
Bar end Mirrors
The one bad thing for me about the KPR is the mirrors, when I have my riding gear on all I can see is my arms and nothing behind me. So I bought these bar end mirrors from Amazon for $23 https://www.amazon.com/dp/B07FCCJR87...roduct_details and they work great, I can see everything behind me now. I scrapped the supplied bolt and tension plug and I am going to install the mirrors with the weights attached. To do that you need a 1/2" piece of 3/16" vacuum hose and you can reuse the original bolt or....
__________________
2022 Venom KPR 200 Red- the fastest color 16t and 46t sprockets, NGK Iridium CPR8EAIX-9, aftermarket full exhaust system. Top speed 81GPS 2023 Venom SS3 KP mini 150– Nibbi carb, Nibbi air filter, aftermarket muffler, decat 2022 Venom Ghost chopper 250 1997 Honda GL1500 Goldwing 1978 Kawasaki KL250 https://youtube.com/@herbiesgarage681 |
![]() |
![]() |
#21 |
Join Date: May 2019
Location: Illinois
Posts: 864
|
Buy a little bit longer bolt to give you more threads for security. This is the bolt you will need
__________________
2022 Venom KPR 200 Red- the fastest color 16t and 46t sprockets, NGK Iridium CPR8EAIX-9, aftermarket full exhaust system. Top speed 81GPS 2023 Venom SS3 KP mini 150– Nibbi carb, Nibbi air filter, aftermarket muffler, decat 2022 Venom Ghost chopper 250 1997 Honda GL1500 Goldwing 1978 Kawasaki KL250 https://youtube.com/@herbiesgarage681 |
![]() |
![]() |
#22 |
Join Date: May 2019
Location: Illinois
Posts: 864
|
Put the vacuum hose into the hole and it will look like this. See the bolt by my finger with the cap nut on it. I turned it around so the nut is facing like this so that the bar end weight will fit in there
__________________
2022 Venom KPR 200 Red- the fastest color 16t and 46t sprockets, NGK Iridium CPR8EAIX-9, aftermarket full exhaust system. Top speed 81GPS 2023 Venom SS3 KP mini 150– Nibbi carb, Nibbi air filter, aftermarket muffler, decat 2022 Venom Ghost chopper 250 1997 Honda GL1500 Goldwing 1978 Kawasaki KL250 https://youtube.com/@herbiesgarage681 |
![]() |
![]() |
#23 |
Join Date: May 2019
Location: Illinois
Posts: 864
|
Then I took the bike to breakfast this morning, 3 hours later and about 135 miles I made it back home, I just wanted to ride all day!
__________________
2022 Venom KPR 200 Red- the fastest color 16t and 46t sprockets, NGK Iridium CPR8EAIX-9, aftermarket full exhaust system. Top speed 81GPS 2023 Venom SS3 KP mini 150– Nibbi carb, Nibbi air filter, aftermarket muffler, decat 2022 Venom Ghost chopper 250 1997 Honda GL1500 Goldwing 1978 Kawasaki KL250 https://youtube.com/@herbiesgarage681 |
![]() |
![]() |
#24 |
Join Date: May 2019
Location: Illinois
Posts: 864
|
One more pic
__________________
2022 Venom KPR 200 Red- the fastest color 16t and 46t sprockets, NGK Iridium CPR8EAIX-9, aftermarket full exhaust system. Top speed 81GPS 2023 Venom SS3 KP mini 150– Nibbi carb, Nibbi air filter, aftermarket muffler, decat 2022 Venom Ghost chopper 250 1997 Honda GL1500 Goldwing 1978 Kawasaki KL250 https://youtube.com/@herbiesgarage681 |
![]() |
![]() |
#25 |
Join Date: May 2019
Location: Illinois
Posts: 864
|
I guess I should have included the final product
![]()
__________________
2022 Venom KPR 200 Red- the fastest color 16t and 46t sprockets, NGK Iridium CPR8EAIX-9, aftermarket full exhaust system. Top speed 81GPS 2023 Venom SS3 KP mini 150– Nibbi carb, Nibbi air filter, aftermarket muffler, decat 2022 Venom Ghost chopper 250 1997 Honda GL1500 Goldwing 1978 Kawasaki KL250 https://youtube.com/@herbiesgarage681 |
![]() |
![]() |
#26 |
Moderator
Join Date: Oct 2016
Location: Houma, La.
Posts: 11,664
|
![]()
I like the bar end mirrors.
![]()
__________________
2024 Linhai 300 ATV 4x4 2023 Lifan Lycan 250 Chopper 2023 Venom Evader 2022 Lifan KPX250 2020 Kawasaki Vulcan S (Sold) 2004 Honda ST 1300 2016 Black Hawk 250 (sold) Keihin PE30 carb,125 main,38 slow.Pod filter,ported & decked head 10:1 CR,Direct Ignition Coil,15/40Sprockets,NGK DPR8EIX-9,De-Cat,Dual Oil Cooler,Digital Cluster 2016 Cazador180 XL 2014 Coolster150 JerryHawk250.com My YouTube Channel |
![]() |
![]() |
#27 |
Join Date: Aug 2020
Location: Savannah, Ga
Posts: 759
|
The glass fell out of one of my mirrors a couple weeks ago. Lol. But, for $25, I'm not mad.
|
![]() |
![]() |
#28 |
Join Date: May 2019
Location: Illinois
Posts: 864
|
What bike did you have them mounted on? The KPR200 has very little vibration on the handlebars and the rubber around the bolt should help isolate it even more. Time will tell
__________________
2022 Venom KPR 200 Red- the fastest color 16t and 46t sprockets, NGK Iridium CPR8EAIX-9, aftermarket full exhaust system. Top speed 81GPS 2023 Venom SS3 KP mini 150– Nibbi carb, Nibbi air filter, aftermarket muffler, decat 2022 Venom Ghost chopper 250 1997 Honda GL1500 Goldwing 1978 Kawasaki KL250 https://youtube.com/@herbiesgarage681 |
![]() |
![]() |
#29 |
Join Date: Aug 2020
Location: Savannah, Ga
Posts: 759
|
My kpm 200. But, I also swapped handlebars also. Vibrating wise, it's my second roughest bike, behind my RC390
|
![]() |
![]() |
#30 |
Join Date: May 2019
Location: Illinois
Posts: 864
|
baffelectomy
I used my drill an extension and bits
__________________
2022 Venom KPR 200 Red- the fastest color 16t and 46t sprockets, NGK Iridium CPR8EAIX-9, aftermarket full exhaust system. Top speed 81GPS 2023 Venom SS3 KP mini 150– Nibbi carb, Nibbi air filter, aftermarket muffler, decat 2022 Venom Ghost chopper 250 1997 Honda GL1500 Goldwing 1978 Kawasaki KL250 https://youtube.com/@herbiesgarage681 |
![]() |
|
![]() |
![]() |
|
|