07-27-2016, 10:19 PM | #16 |
Join Date: Feb 2016
Location: George West, Texas
Posts: 4,097
|
Stealthy...to tell you the truth, I don't think you would not "miss anything" especially since you have just made the statement here. If you miss out on the experience of assembly, you will have many questions on the reasons that something is not functioning correctly. Only you can answer the question of ones own ability, however this is one of the most straight forward mechanic work I have ever done because all the systems on a bike are easily accessible. Assembly is the ultimate course in proper understanding and operation of your motorcycle. If your butt is on the seat, I think that is enough incentive to do it right. And of course you are very careful during the break in period in case something gives way. Really in some ways it is risky to let these purveyors of cheap bikes to build these since the profits may not be that great and they may have more incentive to get them out the door without all the bolts tight,etc... Just my 2 cents.
__________________
***************************************** 2015 Bashan"Blaze" BS250GY-31 (DB-07K-250) GONE 2017 Suzuki V Strom 650 XT "We are all born ignorant, but one must work hard to remain stupid." ~Benjamin Franklin~
|
|
08-29-2016, 03:15 AM | #17 |
Join Date: May 2016
Posts: 1
|
is the Hawk 250 enough? hmm
I have two Hawks new this summer, both with over 1000 miles I've put on them. My bikes both had flat tires almost immediately. The Hawks needed rim-locks($3.50 per wheel) as well as ultra heavy duty tubes($25+per wheel) or I couldn't go a day without a flat. I have since gone over 800 miles a piece without an issue.
My red Hawk goes 63mph out of the box with my blue Hawk capable of 58mph. Both bikes are smooth at 55mph. Riding on the street at 6' tall 225lbs I find the seat very uncomfortable after about an hour, however I have gone off road for 5+ hours and found the bike to be very decent. I would not recommend sandpits, deep mud or extremely rocky terrain for these bikes, but I do ride on mid to upper level trails and have no problems whatsoever. The bikes have plenty of low end power to bring you where you want to go. Driver experience will play a big part in your off road capability. I drive my bikes pretty hard and don't baby them, I do however keep a watchful eye as several parts have come loose on them. I also use quality oils changing at regular intervals. I think for the price they are very good running machines and with proper maintenance and care can offer hours upon hours of fun to be had. These bikes can take it if your butt can, although I would recommend at least to upgrade the foot shifter($30) as the stock is short and fragile. I also think as stated rim-locks and tubes are a must. I don't think anything else is needed for this cheap reliable ride, just my two cents...enjoy |
|
09-07-2016, 02:17 PM | #18 |
Join Date: Aug 2016
Posts: 5
|
I can barely get my Hawk over 40, but I think a new carb/jets will fix that.
|
|
09-07-2016, 03:35 PM | #19 |
Join Date: Jul 2015
Posts: 118
|
I had that problem until I realized I was running half choke. In my defense, my previous bikes only had choke on or off, no in between
|
|
09-07-2016, 07:42 PM | #20 |
Join Date: Aug 2016
Posts: 5
|
Yeah you guys must not read the owners manual.
|
|
10-21-2016, 05:42 PM | #21 | |
Join Date: May 2016
Location: Tybee island, GA
Posts: 182
|
Quote:
|
|
|
10-21-2016, 05:48 PM | #22 |
Join Date: Oct 2015
Posts: 147
|
Some of the bikes have an issue where the tube gets slightly out of alignment and spurs in the metal cause flats. Simple fix is to use duct/electrical tape on the inside of the rim to pad it so the tube isn't rubbing.
|
|
10-22-2016, 07:15 PM | #23 |
Join Date: Jun 2007
Location: Reno, NV
Posts: 89
|
As far as enough, people have ridden iron butt on less bike. Years ago there was a lady that rode her XT all over the country, Canada, Mexico..etc. She was loaded down, but it worked for her.
Only you can determine if it's enough for you. |
|
|
|
|
|