![]() |
#16 |
Moderator
Join Date: Oct 2016
Location: Houma, La.
Posts: 11,663
|
After reading the other post. If its still pulling with the clutch lever pulled Your clutch needs to be adjusted. You shouldn't have more than an 1/8 inch of play in the lever.
__________________
2024 Linhai 300 ATV 4x4 2023 Lifan Lycan 250 Chopper 2023 Venom Evader 2022 Lifan KPX250 2020 Kawasaki Vulcan S (Sold) 2004 Honda ST 1300 2016 Black Hawk 250 (sold) Keihin PE30 carb,125 main,38 slow.Pod filter,ported & decked head 10:1 CR,Direct Ignition Coil,15/40Sprockets,NGK DPR8EIX-9,De-Cat,Dual Oil Cooler,Digital Cluster 2016 Cazador180 XL 2014 Coolster150 JerryHawk250.com My YouTube Channel |
![]() |
![]() |
#17 |
Join Date: Jun 2016
Location: akwesasne, NY-13655
Posts: 2,220
|
Yes! The shift lever is hitting the cases on the up shift. It is not allowing the ratchet and pawls to go through their cycle so he can shift to the next higher gear. It may be only partally engaging second gear. Don't ride it like that, it will wear the dog clutches in the transmission....ARH
|
![]() |
![]() |
#18 |
Join Date: Sep 2017
Location: Lubbock Texas
Posts: 31
|
Ok. Do I have to take off the chain cover or should I be able to just undo the 10mm bolt that clamps it down and adjust it?
|
![]() |
![]() |
#19 |
Join Date: Apr 2017
Location: Southern IL
Posts: 132
|
Yeah, that shift lever may be part of the problem, or all of it.
|
![]() |
![]() |
#20 |
Moderator
Join Date: Oct 2016
Location: Houma, La.
Posts: 11,663
|
you will have to remove the bolt.
__________________
2024 Linhai 300 ATV 4x4 2023 Lifan Lycan 250 Chopper 2023 Venom Evader 2022 Lifan KPX250 2020 Kawasaki Vulcan S (Sold) 2004 Honda ST 1300 2016 Black Hawk 250 (sold) Keihin PE30 carb,125 main,38 slow.Pod filter,ported & decked head 10:1 CR,Direct Ignition Coil,15/40Sprockets,NGK DPR8EIX-9,De-Cat,Dual Oil Cooler,Digital Cluster 2016 Cazador180 XL 2014 Coolster150 JerryHawk250.com My YouTube Channel |
![]() |
![]() |
#21 |
Moderator
Join Date: Oct 2016
Location: Houma, La.
Posts: 11,663
|
When you have the lever off put it in a vice and bend it out some so it will clear the case when you put it back on. Don't try bending it on the bike as you might bend the shaft.
__________________
2024 Linhai 300 ATV 4x4 2023 Lifan Lycan 250 Chopper 2023 Venom Evader 2022 Lifan KPX250 2020 Kawasaki Vulcan S (Sold) 2004 Honda ST 1300 2016 Black Hawk 250 (sold) Keihin PE30 carb,125 main,38 slow.Pod filter,ported & decked head 10:1 CR,Direct Ignition Coil,15/40Sprockets,NGK DPR8EIX-9,De-Cat,Dual Oil Cooler,Digital Cluster 2016 Cazador180 XL 2014 Coolster150 JerryHawk250.com My YouTube Channel |
![]() |
![]() |
#22 |
Join Date: Nov 2016
Location: robertsdale alabama usa
Posts: 1,007
|
also needs clutch adjusted after you do that bending. with the bike off and in first gear adjust the clutch until the bike rolls freely with the clutch lever pulled all the way in. the grinding while trying to go to first gear while running is cause the clutch is partially engaged from not being adjusted correctly. maybe look at some vids on youtube about clutch adjustment
__________________
1991 harley heritage softail classic 2016 hawk kaw h1 400 tripple 13' long chopper in progress 2009 johnny pag bar hog 2004 hd electra glide ultra classic shriner edition 1997 harley davidson 1200 sportster 1972 harley davidson amf sx250 |
![]() |
![]() |
#23 |
Join Date: Nov 2016
Location: robertsdale alabama usa
Posts: 1,007
|
just watched your vid and when you say its gets stuck that looks like it is when you try to go to third. most of the time the bike has to be rolling a little bit to go thru the gears even when coming up on a red light and going back down thru the gears if i wait to do it while stopped some of the gears will be difficult to get to engage. what your showing in the vid may not be a problem cause its not moving up at all but i think thats because the bike is not rolling. when it does go up it looks to be hitting the case so its needs bent or rotated on the splined shaft.
__________________
1991 harley heritage softail classic 2016 hawk kaw h1 400 tripple 13' long chopper in progress 2009 johnny pag bar hog 2004 hd electra glide ultra classic shriner edition 1997 harley davidson 1200 sportster 1972 harley davidson amf sx250 |
![]() |
![]() |
#24 | |
Join Date: Sep 2017
Location: Lubbock Texas
Posts: 31
|
Quote:
Video 2 |
|
![]() |
![]() |
#25 | |
Join Date: Sep 2017
Location: Lubbock Texas
Posts: 31
|
Quote:
|
|
![]() |
![]() |
#26 |
Join Date: Apr 2017
Location: Omaha, NE
Posts: 8,100
|
Put a thin flat head screwdriver between the 2 halves that the bolt goes through to sperad it apart a bit and it should come free.
As far as the bike pulling in gear, that is entirely the clutch adjustment. Google tt250 clutch adjustment and you will find a CSC write up on how to adjust the clutch . Follow that and you should be golden. Most of the adjustment is done on the motor side, and the fine tuning should be done at the lever end.
__________________
Hawk Information and Resource guide: http://www.chinariders.net/showthread.php?t=20331 2018 Hawk 250 - Full Mod list here. http://www.chinariders.net/showpost....62&postcount=1 2024 Royal Enfield Shotgun 650 https://chinariders.net/showthread.php?t=34124 |
![]() |
![]() |
#27 |
Join Date: Nov 2016
Location: robertsdale alabama usa
Posts: 1,007
|
probably cause the clutch isnt fully disengaging
__________________
1991 harley heritage softail classic 2016 hawk kaw h1 400 tripple 13' long chopper in progress 2009 johnny pag bar hog 2004 hd electra glide ultra classic shriner edition 1997 harley davidson 1200 sportster 1972 harley davidson amf sx250 |
![]() |
![]() |
#28 |
Join Date: Nov 2016
Location: robertsdale alabama usa
Posts: 1,007
|
yea that lever is bent way up under there. you can even see the road rash on the end where he crash it.
__________________
1991 harley heritage softail classic 2016 hawk kaw h1 400 tripple 13' long chopper in progress 2009 johnny pag bar hog 2004 hd electra glide ultra classic shriner edition 1997 harley davidson 1200 sportster 1972 harley davidson amf sx250 |
![]() |
![]() |
#29 |
Moderator
Join Date: Oct 2016
Location: Houma, La.
Posts: 11,663
|
As Megadan stated. Put a thin screwdriver between the 2 halves that the bolt goes through to spread it apart. That lever got bent in pretty far. Bend it out far enough to clear the case and you should be good to go.
__________________
2024 Linhai 300 ATV 4x4 2023 Lifan Lycan 250 Chopper 2023 Venom Evader 2022 Lifan KPX250 2020 Kawasaki Vulcan S (Sold) 2004 Honda ST 1300 2016 Black Hawk 250 (sold) Keihin PE30 carb,125 main,38 slow.Pod filter,ported & decked head 10:1 CR,Direct Ignition Coil,15/40Sprockets,NGK DPR8EIX-9,De-Cat,Dual Oil Cooler,Digital Cluster 2016 Cazador180 XL 2014 Coolster150 JerryHawk250.com My YouTube Channel |
![]() |
![]() |
#30 |
Join Date: Jun 2016
Location: akwesasne, NY-13655
Posts: 2,220
|
Yes, the lever is bent in too far. But don't try to rebend it on the bike. Tap that screw driver, or whatever you were using in the video, just enough to get it free enough to get it off. Then bend it back out, or buy a new one. I think CSC has them. There are guys on here that can post a link to CSC, if you decide to go that route. When you bend it out, make sure you bend it out enough to clear the outside of the case by a 1/4 / 3/8ths of an inch. It must not touch the case anywhere in its travel. Let us know if that fixes it. If it does, than we will get to the clutch issues....ARH
|
![]() |
|
![]() |
![]() |
Tags |
enduro, hawk 250 |
|
|