What did you BUY today? - Page 19

**JerryHawk250** · 01-27-2017, 08:11 AM

4 tickets to Monster Jam for tomorrow at the Mercedes Benz Super Dome.

My favorite is the Free Style. Lets tear up some big Trucks. I hope they have the Demo derby race this year. The best race is the trailer race. Think about it. figure 8 racing, with boat trailers, campers. Talk about a mess and fun to watch. Too bad Dennis Anderson won't be driving Grave Digger. He was in a bad accident a few weeks ago. Probably the best monster truck driver out there.

DoomWeasel · 01-27-2017, 10:24 PM

JerryHawk.

I was there at Raymond James Stadium when Dennis wreaked. They pulled him out and he rode off in the paramedic "gator" waving at everyone. I didn't realize he was hurt

pete · 01-28-2017, 02:13 PM

10 liters of gas....
I'm going riding/crashing..."one tends to lead to the other..."

..

**cheesy** · 01-28-2017, 04:10 PM

Now that I have the Audi specific OBD II reader, I will attempt an oil change on the car in the near future. And now I know why it costs north of a hundred bucks to have the oil changed at the dealer.

Case (?-6qts) of Mobil 1 0-40W oil-$32.99 (Don't know why I went for the case. I've never needed a top up in 11 years of ownership)
K & N 3001 oil filter-$14.00

Bikes have oil changes due, too, so sprung for a gallon of Rotella 15-40W for the CX and and a gallon of of Mystic synthetic 15-50W for the Ural. That's good for two oil changes for the Ural and one and a third on the CX.

D batteries for my garage Grundig
Fender washers
Step drill kit.

No wonder I can never get out of Farm and Fleet for under a hundred bucks.

**JerryHawk250** · 01-29-2017, 12:58 PM

Whooohoooo !!!!! Grave Digger put on a hell of a free style show. Awesome day in the pits before the show.

**cheesy** · 01-29-2017, 02:47 PM

Hit the Chicago Winter Bike Swap today

Scored an LED headlight, NOS Maillard rear drum brake hub, Onza pedals and a 25.4MM SR seat post. All for less than thirty bucks.

bogieboy · 01-29-2017, 03:03 PM

didn't buy today, but installed yesterday/today after church... all new countertops and a new sink for Mrs. Bogieboy.

Bruce's · 01-29-2017, 04:25 PM

I just bought a kimpex snow bike kit .I know it's a crappy set up ,but I want to try it out and see what trouble I can get in compared to just riding my bikes with a few studs like I normally do .

BlackBike · 01-29-2017, 07:42 PM

Bogie, ahhhh nice new upgrade. One of those "I can't believe we put up with the way it was for so long" deals. Good work, and DIY, the best kind!

bogieboy · 01-29-2017, 07:55 PM

Quote:

Originally Posted by BlackBike

Bogie, ahhhh nice new upgrade. One of those "I can't believe we put up with the way it was for so long" deals. Good work, and DIY, the best kind!

we didn't put up with it that long...moved in back in september 2016....LOL it was a horrible layout, no dishwasher and a crappy range... a little goes a long way.... total investment in the kitchen: roughly $1500 in appliances, countertop, and sink. shop the deals and it can be done cheap... move some cabinets, add in one, bruised and reduced dishwasher ($700 samsung with a few dents marked down to $150) and some new counter and you are good to go.... look on the wifes face when it all comes together: Priceless!!!!!!

BlackBike · 01-29-2017, 08:32 PM

Quote:

Originally Posted by bogieboy

we didn't put up with it that long...moved in back in september 2016....LOL it was a horrible layout, no dishwasher and a crappy range... a little goes a long way.... total investment in the kitchen: roughly $1500 in appliances, countertop, and sink. shop the deals and it can be done cheap... move some cabinets, add in one, bruised and reduced dishwasher ($700 samsung with a few dents marked down to $150) and some new counter and you are good to go.... look on the wifes face when it all comes together: Priceless!!!!!!

Samsung awesome stuff. Those scratch and dent deals are great when you can get them, usually just of a drop of porcelain white appliance paint and your good to go.

bogieboy · 01-29-2017, 09:13 PM

Quote:

Originally Posted by BlackBike

Samsung awesome stuff. Those scratch and dent deals are great when you can get them, usually just of a drop of porcelain white appliance paint and your good to go.

a bit hard to do with stainless....LOL but yeah... waiting for the matching Fridge to come up scratch and dent and have the whole set... electric true convection range, whisper quiet (seriously... 43 decibels) dishwasher, and fridge... but alas.... no deals on the fridge, so the Frigidaire that came with the house will have to suffice

to date since the purchase of our home, we have resided, redone the kitchen, and put up fresh beadboard in the dining room, along with painting everything... oh, and getting the chimney skim coated, and painting the deck... and redoing the front porch ceiling.... joys of home-ownership i tell ya...

2LZ · 01-30-2017, 10:13 AM

Picked up a new battery at Wally World and ordered a new Unibear chain and rear sprocket for Q. Got her tore down, ready to go and waiting for the mailman. Need to gear it down some for better trail riding. Isn't that aluminum box swingarm a work of art?

Bruce's · 01-30-2017, 10:47 AM

i don't think I have ever seen anybody with a full size atv jack on a motorcycle lift table before .When I scrap a car ,I grab the scissor jack ,put a stable base on them then Weld a metal tube across the top and use them as jacks on my lift tables .I am almost finished an atv sized lift table so I might steal your idea for that .

pistolclass · 01-30-2017, 11:28 AM

Quote:

Originally Posted by Bruce's

i don't think I have ever seen anybody with a full size atv jack on a motorcycle lift table before .When I scrap a car ,I grab the scissor jack ,put a stable base on them then Weld a metal tube across the top and use them as jacks on my lift tables .I am almost finished an atv sized lift table so I might steal your idea for that .

This is chinariders there is no stealing of ideas, only reverse engineering and replication.

01-27-2017, 08:11 AM	#271
JerryHawk250 Moderator Join Date: Oct 2016 Location: Houma, La. Posts: 11,619	4 tickets to Monster Jam for tomorrow at the Mercedes Benz Super Dome. My favorite is the Free Style. Lets tear up some big Trucks. I hope they have the Demo derby race this year. The best race is the trailer race. Think about it. figure 8 racing, with boat trailers, campers. Talk about a mess and fun to watch. Too bad Dennis Anderson won't be driving Grave Digger. He was in a bad accident a few weeks ago. Probably the best monster truck driver out there. __________________ 2023 Lifan Lycan 250 Chopper 2023 Venom Evader 2022 Lifan KPX250 2020 Kawasaki Vulcan S (Sold) 2004 Honda ST 1300 2016 Black Hawk 250 (sold) Keihin PE30 carb,125 main,38 slow.Pod filter,ported & decked head 10:1 CR,Direct Ignition Coil,15/40Sprockets,NGK DPR8EIX-9,De-Cat,Dual Oil Cooler,Digital Cluster 2016 Cazador180 XL 2014 Coolster150 JerryHawk250.com My YouTube Channel
	0

01-27-2017, 10:24 PM	#272
DoomWeasel Join Date: Feb 2016 Location: Tampa Bay Region Posts: 26	JerryHawk. I was there at Raymond James Stadium when Dennis wreaked. They pulled him out and he rode off in the paramedic "gator" waving at everyone. I didn't realize he was hurt __________________ Eric 2016 CSC RX3 Sahara Orange
	0

01-28-2017, 02:13 PM	#273
pete Join Date: Jan 2012 Location: ChCh , NZ Posts: 2,262	10 liters of gas.... I'm going riding/crashing..."one tends to lead to the other..." .. __________________ 09 XT660R ... 06 TTR250 ... 80 Montesa H6 125 Enduro... 77 Montesa Cota 348 MRR "Malcom Rathnell Replica"... Current resto projects.. 81 Honda CT110... 80 Kawasaki KL250A1... 11 Husaburg TE125 enduro... "sold" along with another 31... Lifan 125 Pitbike.. "stolen" ... KIWI BIKER FORUM...... http://www.kiwibiker.co.nz/forums/content.php All the best offroad rides in NZ... http://www.remotemoto.com/ E-mail... xtpete1@gmail.com
	2

01-28-2017, 04:10 PM	#274
cheesy Moderator Join Date: Jul 2010 Location: Elburn, IL Posts: 5,875	Now that I have the Audi specific OBD II reader, I will attempt an oil change on the car in the near future. And now I know why it costs north of a hundred bucks to have the oil changed at the dealer. Case (?-6qts) of Mobil 1 0-40W oil-$32.99 (Don't know why I went for the case. I've never needed a top up in 11 years of ownership) K & N 3001 oil filter-$14.00 Bikes have oil changes due, too, so sprung for a gallon of Rotella 15-40W for the CX and and a gallon of of Mystic synthetic 15-50W for the Ural. That's good for two oil changes for the Ural and one and a third on the CX. D batteries for my garage Grundig Fender washers Step drill kit. No wonder I can never get out of Farm and Fleet for under a hundred bucks. __________________ Cheesy ______________________________________ 07 Hi Bird Enduro-Flown the Coop 07 Ural Gear Up 79 Honda CX500 77 VeloSolex 4600 V3 73 VeloSolex 3800 I'm making this up as I go.-Indiana Jones Telling me something 'is for my own good', is a fast way to a fat lip.-Me I don't even care about my own problems, why should I care about yours?-Quote on one of my favorite t-shirts
	0

01-29-2017, 12:58 PM	#275
JerryHawk250 Moderator Join Date: Oct 2016 Location: Houma, La. Posts: 11,619	Whooohoooo !!!!! Grave Digger put on a hell of a free style show. Awesome day in the pits before the show. __________________ 2023 Lifan Lycan 250 Chopper 2023 Venom Evader 2022 Lifan KPX250 2020 Kawasaki Vulcan S (Sold) 2004 Honda ST 1300 2016 Black Hawk 250 (sold) Keihin PE30 carb,125 main,38 slow.Pod filter,ported & decked head 10:1 CR,Direct Ignition Coil,15/40Sprockets,NGK DPR8EIX-9,De-Cat,Dual Oil Cooler,Digital Cluster 2016 Cazador180 XL 2014 Coolster150 JerryHawk250.com My YouTube Channel
	1

01-29-2017, 02:47 PM	#276
cheesy Moderator Join Date: Jul 2010 Location: Elburn, IL Posts: 5,875	Hit the Chicago Winter Bike Swap today Scored an LED headlight, NOS Maillard rear drum brake hub, Onza pedals and a 25.4MM SR seat post. All for less than thirty bucks. __________________ Cheesy ______________________________________ 07 Hi Bird Enduro-Flown the Coop 07 Ural Gear Up 79 Honda CX500 77 VeloSolex 4600 V3 73 VeloSolex 3800 I'm making this up as I go.-Indiana Jones Telling me something 'is for my own good', is a fast way to a fat lip.-Me I don't even care about my own problems, why should I care about yours?-Quote on one of my favorite t-shirts
	2

01-29-2017, 07:42 PM	#279
BlackBike Join Date: Feb 2016 Location: George West, Texas Posts: 4,097	Bogie, ahhhh nice new upgrade. One of those "I can't believe we put up with the way it was for so long" deals. Good work, and DIY, the best kind! __________________ ***************************************** 2015 Bashan"Blaze" BS250GY-31 (DB-07K-250) GONE 2017 Suzuki V Strom 650 XT "We are all born ignorant, but one must work hard to remain stupid." ~Benjamin Franklin~
	0

01-30-2017, 10:13 AM	#283
2LZ Join Date: Mar 2010 Location: Volcano, Ca Posts: 7,109	Picked up a new battery at Wally World and ordered a new Unibear chain and rear sprocket for Q. Got her tore down, ready to go and waiting for the mailman. Need to gear it down some for better trail riding. Isn't that aluminum box swingarm a work of art? __________________ "Light a fire for a man, and you heat him for a day. Light a man on fire, and you heat him for the rest of his life." 2007 Suzuki DRZ400S (SM convert) 2009 Q Link XP 200 1967 BSA B25 250cc Starfire 2022 Royal Enfield Interceptor 650 2023 Royal Enfield Scram 411 1948 Royal Enfield Model G 350 Last edited by 2LZ; 05-26-2020 at 12:24 PM.
	3

01-30-2017, 10:47 AM	#284
Bruce's Join Date: Apr 2015 Location: Sudbury ,Ontario Posts: 855	i don't think I have ever seen anybody with a full size atv jack on a motorcycle lift table before .When I scrap a car ,I grab the scissor jack ,put a stable base on them then Weld a metal tube across the top and use them as jacks on my lift tables .I am almost finished an atv sized lift table so I might steal your idea for that .
	1