New Zongshen RX3 (ZS250GY-3) Dual Sport - Page 181

oldqwerty · 04-07-2015, 12:30 AM

Not joking. A mild NOx dry system is quite easy to set up once the air flow and fuel flow rates are determined. I have no intention of doing so because there better options available if one wants a faster bike. It is best to stay away from pre-owned machines of any type that have been run on the dunes. WFO is the only way to play in sand no matter the machine.

LordRad · 04-07-2015, 11:42 AM

Hi guys, this is a very interesting thread about a very interesting bike. Possibly in a couple of months sales of this beauty will start in my country, bad thing is the version to be sold here is teh carbureted one and I kinda dont like it, I was wondering if its possible to purchase the injection components and do the swap, Im in doubt since on taobao they sell the engine but there are two different options (carbureted and EFI) and that got me thinking that there might be important differences that could rule out a conversion possibility, finally a quick question for taobao users, I was wondering what would be the shipping price for the aluminum luggage set with a taobao agent plus a few other goodies that I think can be sent inside the cases

detours · 04-07-2015, 06:06 PM

Revzilla just published a short piece on the RX3. Nice to get some more press as the bikes arrive!

Xtyling · 04-07-2015, 07:42 PM

Bellamoto : will the NZ version you sell have a Carburetor or FI? I how about the wheel sizes? Last but not least I noticed the nice smoked wind screen.

Hope to hear your review. Ride it hard through some nasties.

dieselrider · 04-07-2015, 10:36 PM

Belamoto, are you going to re-badge it or keep it a Zong?

AZRider · 04-08-2015, 12:39 AM

I live in Phoenix and planned a camping trip to Doheny Beach, Dana Point some time ago from 4/13 to 4/16. It would sure be nice if the bike passed through customs and was available for pick up. Fingers crossed.

Belamoto · 04-08-2015, 03:14 AM

Quote:

Originally Posted by Xtyling

Bellamoto : will the NZ version you sell have a Carburetor or FI? I how about the wheel sizes? Last but not least I noticed the nice smoked wind screen.

Hope to hear your review. Ride it hard through some nasties.

- Only considering EFI

- Would like to follow CSC and offer larger wheel sizes as option

- Smoked windscreen is factory standard with a larger clear one as an option

Belamoto · 04-08-2015, 03:15 AM

Quote:

Originally Posted by dieselrider

Belamoto, are you going to re-badge it or keep it a Zong?

Right now the plan is to keep it a Zong.

NoVa Rider · 04-08-2015, 02:32 PM

I really enjoyed Belamoto's photos of the uncrating process. Also sounds like CSC's tutorial was helpful in assembling the bike. Which I would expect: CSC did a really nice job laying out the steps, showing how the bars fit together, and photographing the whole process.

But while we anxiously await delivery of our bikes, I did have a question about the tutorial. CSC recommends changing oil before starting the bike for the first time. I am used to bikes and cars that come from the factory with what we used to call "break in oil" that should be changed after a few hundred miles. Not that the break in oil was anything special. My understanding is that the bikes are run briefly by Zongshen for testing before crating. Even so, I would think you could run the original oil for a bit before changing. If not 300 or 400 miles, at least for a engine heat-up cycle or two. At least to warm the oil up before draining.

Probably a matter of personal preference. But I'd be interested if CSC has a different take.

CSCDude · 04-08-2015, 03:41 PM

roots · 04-08-2015, 04:02 PM

Whoooohooooo!!!!!!!

Been waiting a long time for this. This will be my first bike, so I'm extra pumped!
Thanks Joe!

Adjuster · 04-08-2015, 06:29 PM

I am excited for you guys!

/

Adjuster · 04-08-2015, 06:30 PM

How many of you are there here on the site that have purchased the new RX3?

/

oldqwerty · 04-08-2015, 06:34 PM

Quote:

Originally Posted by Adjuster

How many of you are there here on the site that have purchased the new RX3?

/

1.

fishman10 · 04-08-2015, 06:50 PM

me too,,was just informed i was eleventh person to preorder one,so they will be calling me back to finalize everything!

04-07-2015, 12:30 AM	#2701
oldqwerty Join Date: Mar 2015 Location: in a truck Posts: 116	Not joking. A mild NOx dry system is quite easy to set up once the air flow and fuel flow rates are determined. I have no intention of doing so because there better options available if one wants a faster bike. It is best to stay away from pre-owned machines of any type that have been run on the dunes. WFO is the only way to play in sand no matter the machine. __________________ "Thou shall not Zong" is not a commandment.
	0

04-07-2015, 06:06 PM	#2703
detours Join Date: Sep 2014 Location: Arvada, CO Posts: 1,004	Revzilla just published a short piece on the RX3. Nice to get some more press as the bikes arrive! __________________ Red 5 standing by! 2015 CSC red RX3 with 19" front wheel, Shinko 804/805, skid plate, tall seat, 13T/45T sprockets, progressive shock, Winyoochanok windshield, GENSSI LED headlight, SW-Motech tankbag, Shorai Lithium battery 2014 Ural Patrol
	0

04-08-2015, 12:39 AM	#2706
AZRider Join Date: Jan 2015 Location: Phoenix, AZ Posts: 267	Watching the calendar I live in Phoenix and planned a camping trip to Doheny Beach, Dana Point some time ago from 4/13 to 4/16. It would sure be nice if the bike passed through customs and was available for pick up. Fingers crossed. __________________ George 2016 CanAm Spyder F3-L
	0

04-08-2015, 02:32 PM	#2709
NoVa Rider Join Date: Jan 2015 Location: Northern Virginia Posts: 144	Break-in oil? I really enjoyed Belamoto's photos of the uncrating process. Also sounds like CSC's tutorial was helpful in assembling the bike. Which I would expect: CSC did a really nice job laying out the steps, showing how the bars fit together, and photographing the whole process. But while we anxiously await delivery of our bikes, I did have a question about the tutorial. CSC recommends changing oil before starting the bike for the first time. I am used to bikes and cars that come from the factory with what we used to call "break in oil" that should be changed after a few hundred miles. Not that the break in oil was anything special. My understanding is that the bikes are run briefly by Zongshen for testing before crating. Even so, I would think you could run the original oil for a bit before changing. If not 300 or 400 miles, at least for a engine heat-up cycle or two. At least to warm the oil up before draining. Probably a matter of personal preference. But I'd be interested if CSC has a different take.
	0

04-08-2015, 03:41 PM	#2710
CSCDude Join Date: Sep 2014 Posts: 247	They're here! __________________ Joe www.ExhaustNotes.us
	0

04-07-2015, 11:42 AM	#2702
LordRad Join Date: Mar 2015 Posts: 10	Hi guys, this is a very interesting thread about a very interesting bike. Possibly in a couple of months sales of this beauty will start in my country, bad thing is the version to be sold here is teh carbureted one and I kinda dont like it, I was wondering if its possible to purchase the injection components and do the swap, Im in doubt since on taobao they sell the engine but there are two different options (carbureted and EFI) and that got me thinking that there might be important differences that could rule out a conversion possibility, finally a quick question for taobao users, I was wondering what would be the shipping price for the aluminum luggage set with a taobao agent plus a few other goodies that I think can be sent inside the cases
	0

04-07-2015, 07:42 PM	#2704
Xtyling Join Date: Feb 2015 Posts: 13	Bellamoto : will the NZ version you sell have a Carburetor or FI? I how about the wheel sizes? Last but not least I noticed the nice smoked wind screen. Hope to hear your review. Ride it hard through some nasties.
	0

04-07-2015, 10:36 PM	#2705
dieselrider Join Date: Dec 2014 Posts: 24	Belamoto, are you going to re-badge it or keep it a Zong?
	0

04-08-2015, 04:02 PM	#2711
roots Join Date: Dec 2014 Location: San Marcos, CA Posts: 31	I'm not worthy! Whoooohooooo!!!!!!! Been waiting a long time for this. This will be my first bike, so I'm extra pumped! Thanks Joe! __________________ 2015 RX-3 Cyclone (Orange)
	0

04-08-2015, 06:29 PM	#2712
Adjuster Join Date: Dec 2014 Location: Deerfield Beach FL Posts: 1,410	I am excited for you guys! /
	0

04-08-2015, 06:30 PM	#2713
Adjuster Join Date: Dec 2014 Location: Deerfield Beach FL Posts: 1,410	How many of you are there here on the site that have purchased the new RX3? /
	0

04-08-2015, 06:50 PM	#2715
fishman10 Join Date: Sep 2008 Location: central PA Posts: 770	new zong me too,,was just informed i was eleventh person to preorder one,so they will be calling me back to finalize everything! __________________ 2015 zongshen rx3,,(Sold),,,2016 bashan storm,,2005 Harley ultra classic.
	0