JerryHawk250's Lifan KPX250

[4T_Goblin]

https://www.ebay.com/itm/194622424999

Here's another setup that appears to be even closer of a match. This item and others like it are 2 piece, but without O2 sensor bung, like our stock exhaust. At $135 it's hard to justify it just for the muffler part. It does look better than stock, I'll give it that, but it isn't the most attractive aftermarket option.

[JerryHawk250]

Originally Posted by 4T_Goblin

https://www.ebay.com/itm/194622424999

Here's another setup that appears to be even closer of a match. This item and others like it are 2 piece, but without O2 sensor bung, like our stock exhaust. At $135 it's hard to justify it just for the muffler part. It does look better than stock, I'll give it that, but it isn't the most attractive aftermarket option.

We would need to see this actually mounted on a bike. The header pipe on the KPX is almost level coming out the engine whereas on my Hawk it angles down as it comes out the head.

[4T_Goblin]

I need a sponsorship

[JerryHawk250]

Good side by side comparison.

[4T_Goblin]

I think these are made for hawk like bikes but I'm interested in the tail piece not the header. Somebody who's savvy with Alibaba should try and secure one for cheap

[chutt94]

Originally Posted by JerryHawk250

I haven't looked into the exhaust system yet. I just received my cable so time to stat looking into the tuning portion.

What cable did you end up getting?

[JerryHawk250]

Originally Posted by chutt94

What cable did you end up getting?

This one but haven't tested it yet. Plan on playing around with it over the weekend. https://www.amazon.com/dp/B09X2YWJ46...roduct_details

[herbie]

Originally Posted by JerryHawk250

Good side by side comparison.

Both bikes are nice looking machines but the KPX just kind of stands out in a crowd, good pics!

[JFOlivier]

I don't know Jerryhawk, still think that the X-pect looks better than both of those

[TominMO]

Originally Posted by JFOlivier

I don't know Jerryhawk, still think that the X-pect looks better than both of those

Grabbing popcorn for the inevitable flame war.....

[JerryHawk250]

Originally Posted by JFOlivier

I don't know Jerryhawk, still think that the X-pect looks better than both of those

Everybody has a. Option. You know what they say about opinions?

[JFOlivier]

Just remember that beauty is in the eye of the beholder.

[TominMO]

Originally Posted by JFOlivier

Just remember that beauty is in the eye of the beholder.

Or when scoping out women, beauty is in the eye of the beer holder.....

[TominMO]

Hey Jerry, answer a question for me. I put the front sprocket back on the way it was when I took it off. The thicker part on the inside, which also has the 520-13T info where you can't see it until you take the sprocket off and read the back. I thought that was strange, but figured this sprocket might be used on different bikes, so it would go on one way or the other, depending on application.

Looking down the chain from rear to front, it does seem to angle a bit to the left. If I reversed the front sprocket so the thicker "spacer" part was on the outside, and I could then read the designations, that would seem to make the chain straighter, i.e. more to the right at the front. How did your front sprocket come? Thick part and size info on the outside or inside?

[JerryHawk250]

Originally Posted by TominMO

Hey Jerry, answer a question for me. I put the front sprocket back on the way it was when I took it off. The thicker part on the inside, which also has the 520-13T info where you can't see it until you take the sprocket off and read the back. I thought that was strange, but figured this sprocket might be used on different bikes, so it would go on one way or the other, depending on application.

Looking down the chain from rear to front, it does seem to angle a bit to the left. If I reversed the front sprocket so the thicker "spacer" part was on the outside, and I could then read the designations, that would seem to make the chain straighter, i.e. more to the right at the front. How did your front sprocket come? Thick part and size info on the outside or inside?

I never even removed the sprocket cover yet so can't answer that quest right now. I would install it which ever way it aligns the best.