10-27-2009, 09:59 PM | #151 |
Join Date: Aug 2009
Location: London, Ontario
Posts: 1,097
|
Actually if can move the carb forward 3/4"-1" than i don't think the cables will have to be really modified, maybe rerouted a bit to take up the slack. As for the battery box i was looking at the back and was thinking a box that would mount to the 4 bolts that hold the back bumper on, they are tapped now, but i would drill them out and nut and bolts the new box on, it even looks like the pos. and neg. leads are long enough to reach back there.
|
|
10-27-2009, 10:16 PM | #152 |
Join Date: Oct 2009
Location: Ottawa
Posts: 119
|
W&G...yes I will take a couple of shots tomorow. I'm not sure those tabs pinching in is an issue of functionality. Its just one of those things that looks untidy and is easily fixed. Its a good couple of hours messing about though.
I have adopted the same bidding etiquette you describe now that I have seen some of the same names here. I will keep my distance and I am also about finished as well....although lately I have suggested to my lovely wife there are some Christmas gift opportunities to be had.....but...naw...she didn't buy it....w |
|
10-27-2009, 10:21 PM | #153 | |
Join Date: Oct 2009
Location: Newmarket On Canada
Posts: 382
|
Quote:
Thats what I did when I reconnected my handlebar choke to the Mikuni, just gave the cable one extra longitudinal twist to take up 3/8" of slack. It worked fine as you say. My batt box is as far rearward as is humanly possible right now, but it is significantly larger than stock. It is secured on that little "shelf" where the old batt box had a strap attached with 2 angle brackets, and one hanger on each frame rail (top rails). It sits about an inch higher than the the "shelf" I'm talking about, flush with the plasitc, and the batt sits another 3/4" above that. Remember I had to clearance my seat as well so it would fit.
__________________
Good, Fast, or Cheap....Pick Two. |
|
|
10-27-2009, 10:32 PM | #154 |
Join Date: Aug 2009
Location: London, Ontario
Posts: 1,097
|
I see, i was thinking about your bigger battery that you used because of the winch and it had me thinking if i do need the extra power of a bigger battery for the winch i wonder if i could make a second battery box near the front ( under the fan ) to run the winch and then see if they have those battery isolators like they use on vehicles with two batteries, but in a smaller size, this way i'd have the extra power of the bigger battery, lots of room to mount it and it wouldn't interfere with the stock setup and with the isolator it will keep both batteries charged ( if the stator can keep up ) and the extra draw of the winch would be isolated to the one battery, just a thought.
|
|
10-27-2009, 10:41 PM | #155 | |
Join Date: Oct 2009
Location: Newmarket On Canada
Posts: 382
|
Quote:
Another box Another batt More wiring (more =bad) More weight Winch is going up front, may look cluttered. Possible batt acid on legs and engine if I have a mishap (biggie here). Now I know any idiot can knock an idea, and it the real worker is the one who gets it done, but i really have been considering this. The isolators are designed to attach to an alternator, but a simple battery cutoff switch is just as efective. I happen to have one for my sound system. Cheap, mechanical, reliable. Only "problem" is user error. You manually must open or close it.
__________________
Good, Fast, or Cheap....Pick Two. |
|
|
10-27-2009, 10:45 PM | #156 |
Join Date: Aug 2009
Location: London, Ontario
Posts: 1,097
|
Good points there, maybe i'll save the winch for my project buggy, but i think that will be next year. So, since i saw some of the upgrade shocks in your pics have you checked the pressure in them, i went to do mine and they will not hold pressure.
|
|
10-27-2009, 11:50 PM | #157 | |
Join Date: Oct 2009
Location: Newmarket On Canada
Posts: 382
|
Quote:
I dont want to say much more just yet because I'm not finished looking into it yet. Did you try filling yours or testing with a gauge when they arrived? Or were they obviously empty? Do they leak at the valve maybe? When my valve was out i saw a too small O-ring on it.
__________________
Good, Fast, or Cheap....Pick Two. |
|
|
10-28-2009, 01:36 AM | #158 | |
Join Date: Sep 2008
Location: Surrey, B.C., Canada
Posts: 2,185
|
Quote:
..my above comment is all in good fun of course. It's annoying when there is only one auction per day on these things though. At risk of invoking any more collusion against our forum sponsor I'll bow out now. :P |
|
|
10-28-2009, 01:46 AM | #159 | ||
Join Date: Mar 2009
Location: Sardis, BC, Canada
Posts: 25,977
|
Re: thx
Quote:
Quote:
My $0.02
__________________
Weldangrind "I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer |
||
|
10-28-2009, 03:57 AM | #160 |
Join Date: Jun 2009
Location: orbital platform
Posts: 741
|
Just buy another from GIO or use a Ford solenoid.
You really want a "continuous duty" solenoid, rather than an "intermittent duty" solenoid, check the Cole Hersey catalog. Just remember, as voltage decreases current climbs, too much current through a solenoid, and the contacts will weld themselves together. you can avoid the spillage issue with a gel cell. Gel cells are kinda neat, but are generally low current supply (same size), as a wet cell battery. I have my suspicions that the carb floods easily and farts around because of the odd angle. Vibration plays a part too. I have had situations where a slide type carb would not work because of the vibration and had to use a CV type. If "driveability" is an "issue" I wonder if a CV type of carb might be the answer? It would become a slight trade-off between driveability and performance (the CV type generally delivering less power). If I had just bought a CV type from GIO (hint, hint) I would certainly try it out. |
|
10-28-2009, 08:44 AM | #161 |
Join Date: Aug 2009
Location: London, Ontario
Posts: 1,097
|
PCD, when i went to set the pressure to 175psi the nitrogen just leaked out around that snap type ring that holds that aluminum cap with the schrader valve on it.
|
|
10-28-2009, 10:06 AM | #162 |
Join Date: May 2007
Location: Altamont, Kansas
Posts: 15,103
|
175psi? Seems like alot.
__________________
You meet the nicest people on a Honda Clone. |
|
10-28-2009, 11:07 AM | #163 | |
Join Date: Mar 2009
Location: Sardis, BC, Canada
Posts: 25,977
|
Quote:
I have a CV carb that has an electric choke, but it is sized for a 150. I'm going to install the bigger Mikuni and experiment with that instead.
__________________
Weldangrind "I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer |
|
|
10-28-2009, 11:34 AM | #164 | |
Join Date: Aug 2009
Location: London, Ontario
Posts: 1,097
|
Quote:
|
|
|
10-28-2009, 12:53 PM | #165 |
Join Date: Sep 2008
Location: Surrey, B.C., Canada
Posts: 2,185
|
All this talk of leaking shocks makes me a little nervous to pull the trigger on them. GIO has been selling these for quite some time and this is the first this issue has shown up in the forums.
I just received a second chance offer on one of my bids, but now I'm wondering if I should hold off and perhaps go with W&G's suggestion of stockers + heat to soften. |
|
|
|
|
|