Just pulled the trigger...Ordered an Enforcer! - Page 11

hertz9753 · 03-07-2017, 11:19 PM

Did you use a sharpie or put a mark on the first tooth you counted? I don't see any paperclip attachments with pictures.

Ski_rush · 03-07-2017, 11:46 PM

Quote:

Originally Posted by hertz9753

Did you use a sharpie or put a mark on the first tooth you counted? I don't see any paperclip attachments with pictures.

Close...I used my kid's red crayon...that way it wouldn't leave a permanent mark.

culcune · 03-08-2017, 12:11 AM

Thanks for confirming! 2nd 'upgrade' confirmed--46 tooth rear sprocket!!

My guess is the countersprocket is 17, but NO--don't open it up; at least not until you had a reason to...

BlackBike · 03-08-2017, 12:22 AM

Quote:

Originally Posted by culcune

Thanks for confirming! 2nd 'upgrade' confirmed--46 tooth rear sprocket!!

My guess is the countersprocket is 17, but NO--don't open it up; at least not until you had a reason to...

Is it the Lifan counterbalanced?

I figure we would see a profile by now

culcune · 03-08-2017, 08:13 AM

ski_rush--this was just posted to youtube and should help you out. It only took him 10 minutes to assemble his Brozz!!

**JerryHawk250** · 03-08-2017, 09:02 AM

Quote:

Originally Posted by BlackBike

Is it the Lifan counterbalanced?

I figure we would see a profile by now

It's Non counterbalanced just like the Hawk. See post #97

Ski_rush · 03-08-2017, 09:04 AM

Thanks, that's definitely a better quality video. A few things I noticed. No grease, no loctite, and not even screenshot of the parts that came in the parts box. Why not say, "hey I think this bolt goes here". It's basically trial and error.

I also noticed that his front brake line goes strait down the right fork like mine originally did. I've moved mine to go more across the triple tree over to the left side to keep that brake line from being kind of "kinked".

Ski_rush · 03-08-2017, 09:12 AM

If you guys help me figure out those weird washers that I posted in my build thread I can probably create another assembly video with the input/help from you all.

**JerryHawk250** · 03-08-2017, 09:17 AM

Quote:

Originally Posted by Ski_rush

Thanks, that's definitely a better quality video. A few things I noticed. No grease, no loctite, and not even screenshot of the parts that came in the parts box. Why not say, "hey I think this bolt goes here". It's basically trial and error.

I also noticed that his front brake line goes strait down the right fork like mine originally did. I've moved mine to go more across the triple tree over to the left side to keep that brake line from being kind of "kinked".

There is a lot of trial and error on the assembly. I've rerouted the clutch cable a couple times and brake line. We were hoping you have been documenting the assembly and post a full how to (and Not to) on the Enforcer since you were one of the first to buy one. It looks like you had a little more to put together than the Hawk. The cluster and ignition switch was already mounted on the Hawk. Can't wait to see a full view of the bike.

**JerryHawk250** · 03-08-2017, 10:07 AM

Quote:

Originally Posted by Ski_rush

If you guys help me figure out those weird washers that I posted in my build thread I can probably create another assembly video with the input/help from you all.

That would be great! I think your doing a good job for being one of the first to assemble one on here and not having no instructions to go by.

I'll help any way I can.

2LZ · 03-08-2017, 11:36 AM

Quote:

Originally Posted by JerryHawk250

I guess I'm one of the lucky ones. I've had no issues with the stock carb.

Depends. On my X-Moto, I had no problems with the stock carb. My Rhino? A complete pile of crap. It looked like it was cast by a drunk 5 year old.

2LZ · 03-08-2017, 11:40 AM

Quote:

Originally Posted by Ski_rush

If you guys help me figure out those weird washers that I posted in my build thread I can probably create another assembly video with the input/help from you all.

Weird washers: Possibly go to the front fender mounts up from the bottom?

**JerryHawk250** · 03-08-2017, 11:51 AM

Quote:

Originally Posted by 2LZ

Depends. On my X-Moto, I had no problems with the stock carb. My Rhino? A complete pile of crap. It looked like it was cast by a drunk 5 year old.

LOL, I must of had the veteran 12 year old's assemble my bike. All my welds look good, even the one's on the inside the exhaust pipe were clean and bolts were all real tight.

letsride · 03-08-2017, 12:42 PM

Quote:

Originally Posted by culcune

ski_rush--this was just posted to youtube and should help you out. It only took him 10 minutes to assemble his Brozz!!

GOOD ONE! I'M glad to hear it comes with the goodies! They could have put the Brozz cluster on it, but hey we can keep the small guy in business! So I guess I'll have to order one. Now that the DOG GONE PRICE WENT UP!! That ls what I get though for waiting on some other poor guy to take a leap of faith!

Thanks to Ski and Enforcer for that

Ski_rush · 03-08-2017, 03:24 PM

Quote:

Originally Posted by culcune

ski_rush--this was just posted to youtube and should help you out. It only took him 10 minutes to assemble his Brozz!!

Another observation, that guy also has a pretty clean garage. Wish mine looked like that.

03-07-2017, 11:19 PM	#151
hertz9753 Join Date: May 2016 Location: Bismarck, ND Posts: 868	Did you use a sharpie or put a mark on the first tooth you counted? I don't see any paperclip attachments with pictures. __________________ 2015 and 3/4 RPS Hawk 250. Most people would call it a 2016 but the MCO didn't.
	1

03-08-2017, 12:11 AM	#153
culcune Join Date: May 2006 Location: Yuma, Arizona Posts: 9,056	Thanks for confirming! 2nd 'upgrade' confirmed--46 tooth rear sprocket!! My guess is the countersprocket is 17, but NO--don't open it up; at least not until you had a reason to... __________________ "They say that life's a carousel, spinning fast you got to ride it well..." TGB Delivery Scooter 150 TMEC 200 Enduro--carcass is sadly rotting in the backyard
	0

03-08-2017, 08:13 AM	#155
culcune Join Date: May 2006 Location: Yuma, Arizona Posts: 9,056	ski_rush--this was just posted to youtube and should help you out. It only took him 10 minutes to assemble his Brozz!! __________________ "They say that life's a carousel, spinning fast you got to ride it well..." TGB Delivery Scooter 150 TMEC 200 Enduro--carcass is sadly rotting in the backyard
	3

03-08-2017, 09:04 AM	#157
Ski_rush Join Date: Feb 2017 Posts: 449	Thanks, that's definitely a better quality video. A few things I noticed. No grease, no loctite, and not even screenshot of the parts that came in the parts box. Why not say, "hey I think this bolt goes here". It's basically trial and error. I also noticed that his front brake line goes strait down the right fork like mine originally did. I've moved mine to go more across the triple tree over to the left side to keep that brake line from being kind of "kinked".
	2

03-08-2017, 09:12 AM	#158
Ski_rush Join Date: Feb 2017 Posts: 449	If you guys help me figure out those weird washers that I posted in my build thread I can probably create another assembly video with the input/help from you all.
	2