My Brozz just showed up - Page 10

hertz9753 · 04-23-2017, 02:33 AM

Did you guys buy the MSR DR400-758 shifter like me on the first try? I think the right one was 756 part number. While I was waiting for them to get back in stock at amazon I bought a BBR aluminum folder. It's the same length as stock so I never used it. I have a picture from when I adjusting it. I will post the shifter for sale soon.

pete · 04-23-2017, 04:22 AM

Quote:

Originally Posted by Kipper1012

Thanks guys it's amazing how some minor changes can make something look totally different !!

Oh and my helmet came in finally guess I'll be riding the bike to work on Monday.

I picked up some green vinyl at a local sign shop I'm going to use it to add some green accents to my helmet

Darth Vader look....

BigWeld · 04-23-2017, 09:15 AM

That helmet is sick Kipper! I'm totally jealous

Kipper1012 · 04-24-2017, 03:13 PM

Quote:

Originally Posted by hertz9753

Did you guys buy the MSR DR400-758 shifter like me on the first try? I think the right one was 756 part number. While I was waiting for them to get back in stock at amazon I bought a BBR aluminum folder. It's the same length as stock so I never used it. I have a picture from when I adjusting it. I will post the shifter for sale soon.

Yup the first one I tried was the 0758 that everyone uses for the hawk . The second one I tried was 0755 and that one the splines were correct but it was smaller than the stock one.

Quote:

Originally Posted by BigWeld

That helmet is sick Kipper! I'm totally jealous

Thanks I love it ! I wanted a Motocross style but with a flip down sun shield and face shield so I don't need googles or my sunglasses.
this AFX-FX42DS fit the bill and I got it for $160 shipped from eBay

Ski_rush · 04-25-2017, 11:59 AM

Did you ever get the axle bolt problem resolved?

Kipper1012 · 04-25-2017, 12:21 PM

Quote:

Originally Posted by Ski_rush

Did you ever get the axle bolt problem resolved?

Nope they sent me the wrong parts and never sent me the axle bolt or gas cap

Once I contacted them about screwing up they have not been returning my calls or emails

MOTOXtreme · 04-25-2017, 07:07 PM

Quote:

Originally Posted by Kipper1012

Nope they sent me the wrong parts and never sent me the axle bolt or gas cap

Once I contacted them about screwing up they have not been returning my calls or emails

I think I'm getting the runaround too. I'm being a pest, only because I have nothing to loose. The bike is here, and titled. But, they know me by name and I have no plans to relent!

BlackBike · 04-25-2017, 07:43 PM

Quote:

Originally Posted by MOTOXtreme

I think I'm getting the runaround too. I'm being a pest, only because I have nothing to loose. The bike is here, and titled. But, they know me by name and I have no plans to relent!

schedule for TT's (tuesdays and thursday). then when they really get bitchy go to MWF's.

Kipper1012 · 04-27-2017, 01:35 PM

Well I drove my bike to work 25mi each way yesterday. 50% of my commute is very rural roads and I have to say even with the LED bulb this headlight SUCKS.
The light is so scattered it does absolutely no good to illuminate anything more than 25 feet in front of the bike.

I'm trying to figure out how to retrofit a better headlight or maybe a hid housing

Ariel Red Hunter · 04-27-2017, 02:32 PM

Quote:

Originally Posted by Kipper1012

Well I drove my bike to work 25mi each way yesterday. 50% of my commute is very rural roads and I have to say even with the LED bulb this headlight SUCKS.
The light is so scattered it does absolutely no good to illuminate anything more than 25 feet in front of the bike.

I'm trying to figure out how to retrofit a better headlight or maybe a hid housing

You can try turning the bulb holder 180 degrees. The problem isn't the bulb, it's the reflector. LED bulbs seem to work better in a traditional reflector. The older round lamp has the kind of reflector that seems to work better with an LED bulb. The kind of lamp that takes a seperate high intensity bulb...ARH

Kipper1012 · 04-27-2017, 04:25 PM

Yes the problem is the reflector/housing I never tried the stock bulb but I doubt it will be any better.

What I was thinking was installing a hid projector housing with a led bulb into the stock reflector housing. Back in the day I did this with a car I installed HID projectors into a stock incandescent housing

Merlin · 04-27-2017, 05:01 PM

Quote:

Originally Posted by Ariel Red Hunter

You can try turning the bulb holder 180 degrees.

Be sure to try this as they have a up and down side. Mine does the same thing upside down.

Kipper1012 · 04-27-2017, 06:32 PM

That was the first thing I tried . When you have it in the wrong way the low beam shoots way up in the air instead of straight ahead

Merlin · 04-27-2017, 07:30 PM

Have you tried adjusting the headlight housing?

goat67 · 04-27-2017, 07:50 PM

Quote:

Originally Posted by Kipper1012

Yes the problem is the reflector/housing I never tried the stock bulb but I doubt it will be any better.

What I was thinking was installing a hid projector housing with a led bulb into the stock reflector housing. Back in the day I did this with a car I installed HID projectors into a stock incandescent housing

Keep us posted as to anything you find to make it better.

04-23-2017, 09:15 AM	#138
BigWeld Join Date: Nov 2016 Location: East Pembroke, NY Posts: 301	That helmet is sick Kipper! I'm totally jealous __________________ Rides a 2016 Bashan 18C with Blue PlastiDip, piped and jetted, USB charger, real-time digital volt meter, faux carbon fiber handguards, 5 COB led headlight upgrade, auxiliary led light bars, and an MSR shift lever with new grips, T6 aluminum handlebars anodized in blue, polished handlebar brace, decals, HD Unibear chain and spoke covers waiting on the always-full mod shelf......
	0

04-27-2017, 01:35 PM	#144
Kipper1012 Join Date: Mar 2017 Location: Florida Posts: 198	Well I drove my bike to work 25mi each way yesterday. 50% of my commute is very rural roads and I have to say even with the LED bulb this headlight SUCKS. The light is so scattered it does absolutely no good to illuminate anything more than 25 feet in front of the bike. I'm trying to figure out how to retrofit a better headlight or maybe a hid housing __________________ 2016 Green Bashan Brozz.
	1

04-27-2017, 04:25 PM	#146
Kipper1012 Join Date: Mar 2017 Location: Florida Posts: 198	Yes the problem is the reflector/housing I never tried the stock bulb but I doubt it will be any better. What I was thinking was installing a hid projector housing with a led bulb into the stock reflector housing. Back in the day I did this with a car I installed HID projectors into a stock incandescent housing __________________ 2016 Green Bashan Brozz.
	0

04-27-2017, 06:32 PM	#148
Kipper1012 Join Date: Mar 2017 Location: Florida Posts: 198	That was the first thing I tried . When you have it in the wrong way the low beam shoots way up in the air instead of straight ahead __________________ 2016 Green Bashan Brozz.
	0

04-27-2017, 07:30 PM	#149
Merlin Join Date: Jun 2016 Location: Colorado Posts: 1,107	Have you tried adjusting the headlight housing? __________________ Bashan Blaze Mods: Alloy Rim's, Muffler, Mukuni VM26 Carb, Foam Filter, Tachometer, Volt Meter,LED Headlight, LED Blinkers
	0

04-25-2017, 11:59 AM	#140
Ski_rush Join Date: Feb 2017 Posts: 449	Did you ever get the axle bolt problem resolved?
	0