01-06-2011, 02:09 PM | #1 |
Join Date: Jan 2011
Posts: 6
|
Looking for parts 2010 GIO WORK HORSE 800cc UTV
I recently bought a side by side 800cc Work horse and was wondering where i can get parts for this UTV and hopefully within USA and CANADA to reduce delivery time. Im from the Ottawa area (canada) . Any help would be much apreciated. THanks
|
|
01-06-2011, 02:14 PM | #2 |
Join Date: May 2007
Location: Altamont, Kansas
Posts: 15,103
|
__________________
You meet the nicest people on a Honda Clone. |
|
01-06-2011, 02:32 PM | #3 |
Join Date: Jan 2011
Posts: 6
|
Parts are slow and was wondering if any local dealers or parts suppliers nearby for quicker turn around times. But yes Gio can get some parts.
|
|
01-06-2011, 03:40 PM | #4 |
Join Date: May 2007
Location: Altamont, Kansas
Posts: 15,103
|
What type of parts are you needing?
Not sure if the Workhorse is modeled after any big name UTVs like the mule or rhino etc.
__________________
You meet the nicest people on a Honda Clone. |
|
01-06-2011, 04:52 PM | #5 |
Join Date: Jan 2011
Posts: 6
|
All the consumables plus aftermarket. Tools like primary (front) clutch removal tool. "The right one" A better clutch, pads, shock components, disks ect.
|
|
01-06-2011, 06:19 PM | #6 |
Join Date: Mar 2009
Location: Southeastern Washington desert
Posts: 14,761
|
Wow that looks like a nice machine. I though Gio was good about getting it's customers parts? I have no idea what that is a clone of, but I cant think of many (any) 3 cylinder Big Four engines.
__________________
Happy to serve. |
|
01-07-2011, 08:58 AM | #7 |
Join Date: May 2007
Location: Altamont, Kansas
Posts: 15,103
|
Looks like they used the Honda Big Red UTV. Not an exact copy.
__________________
You meet the nicest people on a Honda Clone. |
|
01-07-2011, 11:28 AM | #8 |
Join Date: Jan 2011
Posts: 6
|
Do you know if the shocks, pads, disks and any consumables are the same? How about primary and secondary clutches. As the work horse ahs a 3 cyl suzuki engine in it? I guess my question is that if Giobikes goes belly up, where can i get parts for MY GIO Work Horse 800cc and MY Gio Rock liner 500cc? Thanks in Advance
|
|
01-07-2011, 12:39 PM | #9 |
Join Date: May 2007
Location: Altamont, Kansas
Posts: 15,103
|
Not sure. I would have had a had time buying something that expensive without knowing if it was supported.
If the engine is suzuki you may want to look into the japanese kei trucks. They have engine about the size. I have never seen the honda in person. You might need to make a trip to a local honda dealer and do your own comparison.
__________________
You meet the nicest people on a Honda Clone. |
|
01-07-2011, 01:42 PM | #10 |
Join Date: Jan 2011
Posts: 6
|
Will do. I did find that its a copy pretty much of the Kazuma Mammoth UTV but thats Chinese also. That was the USA version that now sells here. But still most parts take a long time for sure. Thanks for your help thus far.
|
|
01-07-2011, 03:05 PM | #11 |
Join Date: Feb 2008
Location: Terrell and Grapevine Tx.
Posts: 1,585
|
If it is anything like the bikes and ATV's, Many manufactuers will use the same parts. As the bigger ATV's and UTV's gain popularity, parts should become much easier I am guessing.
|
|
01-07-2011, 03:16 PM | #12 |
Join Date: Jun 2009
Location: orbital platform
Posts: 741
|
Maybe mistakenly, I was under the impression the engines were either Suzuki, or Subaru, clones.
|
|
|
|
|
|