carb jetting

mizke · 08-01-2010, 08:38 PM

ok so i asked this in my new guy thread but i got to thinking after searching for the information. it would be nice to have a thread that will show up in a search and have the information there.

so the question is will a jet kit from a yamaha or honda or any of the big 4 brand quads work on a pz30 carb ?

need to know this before my fmf powercore 2 muffler, unifilter and performance coil gets here as i dont want to lean out and blow my motor.. but if it does blow then its a reason to upgrade to that gio 250cc motor :twisted:

Weldangrind · 08-02-2010, 01:37 AM

I answered that in your other post, but for the benefit of new readers I'll say that I don't buy jet kits, just individual jets. I used a 22.5 pilot and 110 main (vs. 20 and 100 stock).

I get 'em at the local Yamaha dealer for cheap.

anthonyfa18 · 08-02-2010, 01:50 AM

i am running a stock gy6 150cc carb no rejet and it is running good and look at my mods

mizke · 08-02-2010, 01:58 AM

i wanted to make a complete thread for the question for new readers to be able to find easier..

so yamaha jets will work in a pz30 carb ?

Weldangrind · 08-03-2010, 02:25 AM

I'm not saying that. I'm saying that I found jets to fit a Mikuni at my local Yamaha dealer. Maybe you'll have similar luck at a Honda dealer.

08-01-2010, 08:38 PM	#1
mizke Join Date: Aug 2010 Location: austin, tx Posts: 1,452	carb jetting ok so i asked this in my new guy thread but i got to thinking after searching for the information. it would be nice to have a thread that will show up in a search and have the information there. so the question is will a jet kit from a yamaha or honda or any of the big 4 brand quads work on a pz30 carb ? need to know this before my fmf powercore 2 muffler, unifilter and performance coil gets here as i dont want to lean out and blow my motor.. but if it does blow then its a reason to upgrade to that gio 250cc motor :twisted:
	0

08-02-2010, 01:37 AM	#2
Weldangrind Join Date: Mar 2009 Location: Sardis, BC, Canada Posts: 25,977	I answered that in your other post, but for the benefit of new readers I'll say that I don't buy jet kits, just individual jets. I used a 22.5 pilot and 110 main (vs. 20 and 100 stock). I get 'em at the local Yamaha dealer for cheap. __________________ Weldangrind "I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer
	0

08-02-2010, 01:50 AM	#3
anthonyfa18 Join Date: Nov 2009 Location: montreal Posts: 242	i am running a stock gy6 150cc carb no rejet and it is running good and look at my mods __________________ 2008 gio beast 200cc mod list YTX14-BS battery mod,gy6 carb 250cc,custom intake,125cc cf dirtbike muffler,MPR filter/intake,performance cdi,ngk iridium xi dpr8eix-9,performance coil pack and wire, pro taper handle bar, Gio air shocks, yam swing arm bus
	0

08-03-2010, 02:25 AM	#5
Weldangrind Join Date: Mar 2009 Location: Sardis, BC, Canada Posts: 25,977	I'm not saying that. I'm saying that I found jets to fit a Mikuni at my local Yamaha dealer. Maybe you'll have similar luck at a Honda dealer. __________________ Weldangrind "I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer
	0

08-02-2010, 01:58 AM	#4
mizke Join Date: Aug 2010 Location: austin, tx Posts: 1,452	i wanted to make a complete thread for the question for new readers to be able to find easier.. so yamaha jets will work in a pz30 carb ?
	0