09-07-2009, 10:57 AM | #1 |
Join Date: Jul 2008
Location: West Virginia
Posts: 19
|
Hensim Hunter GY-6 150cc killswitch question
Howdy all,
There is a kill switch on the left that comes thorugh the plastic body of the bike over the wheel. It has a part with a lanyard on it that goes on the wrist and will pop off and kill then engine in the event of a wreck. Several times the cable going into it has popped off on the backside (pulled off by a branch) and now it comes out easily. I have it electric taped up currently, but I wonder if there is an aftermarket replacement that would work better. Any help appreciated. Dr.Phil
__________________
2008 QLink Legacy 250 1982 Honda C70 Passport 2008 Hensim Hunter ATV 150cc |
|
09-07-2009, 05:02 PM | #2 |
Join Date: Sep 2008
Location: Surrey, B.C., Canada
Posts: 2,185
|
Are you able to take a picture of this for us to look at?
|
|
09-07-2009, 05:17 PM | #3 |
Join Date: May 2007
Location: Altamont, Kansas
Posts: 15,103
|
Check out those designed for jet skis.
Allen
__________________
You meet the nicest people on a Honda Clone. |
|
09-07-2009, 06:17 PM | #4 | |
Join Date: Aug 2009
Location: London, Ontario
Posts: 1,097
|
Quote:
|
|
|
09-07-2009, 07:54 PM | #5 |
Join Date: Aug 2008
Location: Tracy, California
Posts: 83
|
I have a hensim 150cc quad. My tether kill switch broke shortly after I got the quad. I bought a new chinese generic kill switch on eBay for cheap. It was an exact replacement. Its been working now for two years.
But do you really need the tether kill switch? I've never tied mine off to anything other than the handlebars, which of course does no good at all. If mine were to ever fail again I'd just remove it. |
|
|
|
|
|