Just got mine yesterday!

thearmyguy · 02-14-2009, 10:48 AM

Just got mine yesterday and it's so sweet!!!! I drove about 100miles on it no problem but I noticed the speedo is off by like 15MPH (wtf) I was going about 40 but the speedo was reading 65... I also noticed the brake light sucks other then that it's a tight chopper. Just odered my mirrors yesterday too... Any help on this bike would be sweet.. Thanks

SpudRider · 02-14-2009, 02:42 PM

Congratulations on your new Dragon Chopper! If you get a chance, please post some photos. We love photos!

Spud

thearmyguy · 02-15-2009, 08:50 AM

:x okay I tried to change out the brake light just to burn the wire, the brake light works still but the wire melted a little. How do I change out the brake light

panamarandy · 02-15-2009, 09:25 AM

Welcome to the boards....
If its a metric speedo, you cant trust em...

Plus I enjoy your area up there, go to Ft Benning whenever I get the chance driving through there.

Forklift352 · 02-21-2009, 02:18 AM

I have found that the wiring is very poor.Your wire melted
because you are not properly grounded.And I would recomend
wiring the whole bike.I did mine and found out it had poor ground
and a electrical feed back.

02-14-2009, 10:48 AM	#1
thearmyguy Join Date: Feb 2009 Location: Phenix city, AL Posts: 43	Just got mine yesterday! Just got mine yesterday and it's so sweet!!!! I drove about 100miles on it no problem but I noticed the speedo is off by like 15MPH (wtf) I was going about 40 but the speedo was reading 65... I also noticed the brake light sucks other then that it's a tight chopper. Just odered my mirrors yesterday too... Any help on this bike would be sweet.. Thanks
	0

02-14-2009, 02:42 PM	#2
SpudRider Join Date: Jul 2008 Location: Idaho Posts: 25,054	Congratulations! Congratulations on your new Dragon Chopper! If you get a chance, please post some photos. We love photos! Spud __________________ Spud "Never argue with an idiot. He will drag you down to his level, and beat you with experience." Mark Twain 2015 Zongshen ZS250GY-3 (RX3) 2006 Zongshen ZS200GY-2 (Sierra 200) 2005 Honda XR650L 2004 Honda CRF250X 1998 Kawasaki KDX220 Mods made to my Zongshen ZS200GY-2: http://www.chinariders.net/showthread.php?t=6894
	0

02-15-2009, 08:50 AM	#3
thearmyguy Join Date: Feb 2009 Location: Phenix city, AL Posts: 43	burnt wire! :x okay I tried to change out the brake light just to burn the wire, the brake light works still but the wire melted a little. How do I change out the brake light
	0

02-15-2009, 09:25 AM	#4
panamarandy Join Date: Mar 2008 Location: panama city, florida Posts: 353	Welcome to the boards.... If its a metric speedo, you cant trust em... Plus I enjoy your area up there, go to Ft Benning whenever I get the chance driving through there. __________________ 2007 Tank Vision R-3 2005 Quinqi Scooter
	0

02-21-2009, 02:18 AM	#5
Forklift352 Join Date: Sep 2008 Location: Salem ,Oregon Posts: 121	I have found that the wiring is very poor.Your wire melted because you are not properly grounded.And I would recomend wiring the whole bike.I did mine and found out it had poor ground and a electrical feed back.
	0