Vitacci Tank 200 EFI Deluxe - Page 3

Picollo · 11-14-2024, 09:58 PM

I found the 32-trottle body on eBay. Can you give me a link where I can get the fuel injector and which exhaust upgrade you use? Thanks.

Never mind, I found it and already ordered it.
I didn't buy a new exhaust. I am unsure if that would be contra-productive since no O2 sensor is on it.
I checking for updates here since it seams you know what you doing.

danklyrides · Today, 02:55 AM

This is the exhaust I got. It has the bung for the O2 sensor built in.

I'm glad you found the injector! The place I bought mine from didn't have any more.

Cheers!
Dankly

danklyrides · Today, 03:31 AM

I searched for a high-flow alternative for the stock paper air filter but I wasn't able to find one that fits in the Tank air box. So back to AliExpress!!

Intake kit
Coupling
Filter

I had to compress the aluminum intake tube about 5mm to fit nicely under the engine pivot cross bar (red arrow in picture). I just squeezed it in my bench vise.

I wanted to keep the evap system and crankcase vent functioning so I drilled a hole in the tube and used a tire valve stem as a fitting (green arrow in picture). I like the way it came out.

I took it for a 30 mile ride and it is running great! I'm very pleased with it and think I am done with performance related modifications. Just to be clear, I didn't NEED to do any of this but I really enjoy tinkering and it is really affordable on a GY6.

The last pic is my temporary solution for the transmission vent tube. The little stick on holder that will keep it up and out of the way for now

I think the next thing I will look at modifying is the suspension. The rear shocks could definitely be better

Cheers!
Dankly

11-14-2024, 09:58 PM	#31
Picollo Join Date: Oct 2024 Location: Tyler TX Posts: 18	I found the 32-trottle body on eBay. Can you give me a link where I can get the fuel injector and which exhaust upgrade you use? Thanks. Never mind, I found it and already ordered it. I didn't buy a new exhaust. I am unsure if that would be contra-productive since no O2 sensor is on it. I checking for updates here since it seams you know what you doing. __________________ Kawasaki Vulcan 1700 Classic Kawasaki Vulcan 650S Honda Rebell 1100 Vitacci Tank 200 EFI Last edited by Picollo; 11-15-2024 at 12:33 PM.
	0

Today, 03:31 AM	#33
danklyrides Join Date: May 2024 Location: Idaho, USA Posts: 31	I searched for a high-flow alternative for the stock paper air filter but I wasn't able to find one that fits in the Tank air box. So back to AliExpress!! Intake kit Coupling Filter I had to compress the aluminum intake tube about 5mm to fit nicely under the engine pivot cross bar (red arrow in picture). I just squeezed it in my bench vise. I wanted to keep the evap system and crankcase vent functioning so I drilled a hole in the tube and used a tire valve stem as a fitting (green arrow in picture). I like the way it came out. I took it for a 30 mile ride and it is running great! I'm very pleased with it and think I am done with performance related modifications. Just to be clear, I didn't NEED to do any of this but I really enjoy tinkering and it is really affordable on a GY6. The last pic is my temporary solution for the transmission vent tube. The little stick on holder that will keep it up and out of the way for now I think the next thing I will look at modifying is the suspension. The rear shocks could definitely be better Cheers! Dankly Attached Thumbnails
	1

Today, 02:55 AM	#32
danklyrides Join Date: May 2024 Location: Idaho, USA Posts: 31	This is the exhaust I got. It has the bung for the O2 sensor built in. I'm glad you found the injector! The place I bought mine from didn't have any more. Cheers! Dankly
	0