Go Back   ChinaRiders Forums > Technical/Performance > ATVs
Register FAQ Community Calendar Today's Posts Search
Reply
 
Thread Tools Search this Thread Display Modes
Old 09-27-2024, 11:55 PM   #1
darren   darren is offline
 
Join Date: Sep 2024
Posts: 5
no spark

picked up a kids atv serial #L5kgue828771008229 replaced wiring harness and all components with new from amazon still has no spark i have 2 connectors blue, white and a green wire open i think its lights and a black and yellow with green stipe connector in the front harness not sure if its foot brake and a green brown and yellow with green stripe connector and a black and green connector not connected in the rear of harness engine rolls over when i squeeze the front break but no spark is the coil somehow grounding out


 
Reply With Quote
Old 10-01-2024, 09:40 PM   #2
shad88   shad88 is offline
 
Join Date: Mar 2021
Location: Boston
Posts: 21
None of those connectors will cause no spark. Did you replace the stator? If it's a 2 pole stator I've had a bunch of them not adjusted properly over the last couple of years.


 
Reply With Quote
Old 10-05-2024, 11:06 PM   #3
darren   darren is offline
 
Join Date: Sep 2024
Posts: 5
yes its a new 2 pole stator


 
Reply With Quote
Old 10-20-2024, 12:05 AM   #4
darren   darren is offline
 
Join Date: Sep 2024
Posts: 5
stator gap good any wiring diagrams available for these bikes maybe i'm missing something that should be connected


 
Reply With Quote
Old 10-21-2024, 08:36 PM   #5
darren   darren is offline
 
Join Date: Sep 2024
Posts: 5
found the problem a defective new cdi


 
Reply With Quote
Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 06:58 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.