Hawk 250 tire size

Patch56 · 10-10-2024, 04:45 PM

Hello all,
What is the best tires for a hawk 250 that is mostly ridden on streets? Also I am having a hard time finding the 80/100 21 front and 110/100 18 rear tires. Where are you guys purchasing them from? Also would you change out the bearings while I am at it?

buzz · 10-11-2024, 07:09 AM

Amazom or ebay, if bearings spin easy bearing are good.

Megadan · 10-11-2024, 08:03 PM

In standard sizes a 3.0x21 front and 4.6x18 rear are as close as you can get. 2.75x21 and 4.10x18 will also work, but are a tad smaller in width and height.

You can also run 90/90-21 up front and a 120/80-19 or even better a 120/90-18 rear (closest in diameter to stock).

As for the bearings, you could at least check them. If they are bad you can order new ones and do them another time. Removing the wheels isn't that hard of a job, especially the front.

sburk · 10-11-2024, 08:47 PM

Quote:

Originally Posted by Megadan

You can also run 90/90-21 up front and a 120/80-19 or even better a 120/90-18 rear (closest in diameter to stock).

Did you mean 120/80-18 and 120/90-18?
Just wondering because I am also looking to get diffent tires.

wally · Yesterday, 05:20 PM

I use these tires as "Street" tires on my hawk. They worked without messing up the speedometer too much:

Shinko 270 Super Classic TiresSKU: 1297213
Wheel Location: Front
Tire Size: 3.00x21 57S TT

Shinko 270 Super Classic TiresSKU: 1779926
Wheel Location: Front/Rear
Tire Size: 4.50-18 70H TT

I got them from Cycle Gear as there was one close enough and they included install. They worked fine altho if i remember Cycle Gear balanced them very poorly and I had to re-do it. Get nice heavy duty tubes too! I like: Michelin Ultra Heavy Duty MX Tubes

10-10-2024, 04:45 PM	#1
Patch56 Join Date: Aug 2022 Location: Pocatello, Idaho Posts: 23	Hawk 250 tire size Hello all, What is the best tires for a hawk 250 that is mostly ridden on streets? Also I am having a hard time finding the 80/100 21 front and 110/100 18 rear tires. Where are you guys purchasing them from? Also would you change out the bearings while I am at it?
	0

10-11-2024, 08:03 PM	#3
Megadan Join Date: Apr 2017 Location: Omaha, NE Posts: 8,109	In standard sizes a 3.0x21 front and 4.6x18 rear are as close as you can get. 2.75x21 and 4.10x18 will also work, but are a tad smaller in width and height. You can also run 90/90-21 up front and a 120/80-19 or even better a 120/90-18 rear (closest in diameter to stock). As for the bearings, you could at least check them. If they are bad you can order new ones and do them another time. Removing the wheels isn't that hard of a job, especially the front. __________________ Hawk Information and Resource guide: http://www.chinariders.net/showthread.php?t=20331 2018 Hawk 250 - Full Mod list here. http://www.chinariders.net/showpost....62&postcount=1 2024 Royal Enfield Shotgun 650 https://chinariders.net/showthread.php?t=34124
	0

10-11-2024, 07:09 AM	#2
buzz Join Date: Dec 2020 Location: Dayton Pa. Posts: 950	Amazom or ebay, if bearings spin easy bearing are good.
	0

Yesterday, 05:20 PM	#5
wally Join Date: Nov 2021 Posts: 46	I use these tires as "Street" tires on my hawk. They worked without messing up the speedometer too much: Shinko 270 Super Classic TiresSKU: 1297213 Wheel Location: Front Tire Size: 3.00x21 57S TT Shinko 270 Super Classic TiresSKU: 1779926 Wheel Location: Front/Rear Tire Size: 4.50-18 70H TT I got them from Cycle Gear as there was one close enough and they included install. They worked fine altho if i remember Cycle Gear balanced them very poorly and I had to re-do it. Get nice heavy duty tubes too! I like: Michelin Ultra Heavy Duty MX Tubes
	0