Rear brake caliper bolt identification (Templar X)

vividpixel · Yesterday, 08:36 PM

My rear brake caliper has one bolt that is way too tight from factory, and it's now stripped. The head of it is a 4mm set screw and only that portion is threaded. What do you call this style of bolt? A ton of bonus points if you know where to get one, but I'd settle for knowing what to look for.

A replacement caliper may be easier than extraction and would be my fallback plan. I see the entire rear caliper on Zuumav's parts diagram under Handlebar Assembly, but I cannot find anything matching their part number for it: 06.08.0580

Their AliExpress store doesn't even show results if you search for the word "caliper."

Bruces · Yesterday, 09:51 PM

That’s a calliper pin ,or a calliper slide pin ,you can get them at any auto parts store ,but probably not for your china bike .

vividpixel · Yesterday, 11:40 PM

It seems Harley Davidson Sportster models use the same design. I assume this would be far larger than what I need: https://a.co/d/ghInHnI ("Harddrive Caliper Pad Pins - Rear")
Found a couple options for Can-Am Mavericks or Commanders, which I'm sure are also too big.

I will try to get in touch with Zuumav and see if they'll sell the slide pins or a caliper. Good time to ask about a rear brake pedal, too, since that's another thing I haven't found a replacement for. China bikes are definitely inconvenient sometimes, but it beats not riding at all, or going into debt to do so.

CC-John · Today, 07:48 AM

The Templar X brake calipers are a clone of the 1985-1987 Honda CMX250C Rebel front brake caliper. Might be worth taking a chance to see if OEM Honda parts fit..

Here's a link to a parts breakdown on Partszilla..

https://www.partzilla.com/catalog/ho...s9-BDTx2MqMa8B

The EBC FA-86 brake pads that fit these bikes also fit a few Kymco models.. Might be worth looking for caliper parts for these.

Active SR 50 • 2008

Nexxon 125 E3 2008

Nexxon 50 2008

Hope this helps..

GypsyR · Today, 09:27 AM

Is it in these diagrams? Kind of small and hard to see. https://www.chinariders.net/showthread.php?t=34693

Yesterday, 08:36 PM	#1
vividpixel Join Date: Feb 2022 Location: Nevada, USA Posts: 104	Rear brake caliper bolt identification (Templar X) My rear brake caliper has one bolt that is way too tight from factory, and it's now stripped. The head of it is a 4mm set screw and only that portion is threaded. What do you call this style of bolt? A ton of bonus points if you know where to get one, but I'd settle for knowing what to look for. A replacement caliper may be easier than extraction and would be my fallback plan. I see the entire rear caliper on Zuumav's parts diagram under Handlebar Assembly, but I cannot find anything matching their part number for it: 06.08.0580 Their AliExpress store doesn't even show results if you search for the word "caliper." __________________ Templar X 250: 14t / 42t, Nibbi PE30
	0

Yesterday, 11:40 PM	#3
vividpixel Join Date: Feb 2022 Location: Nevada, USA Posts: 104	It seems Harley Davidson Sportster models use the same design. I assume this would be far larger than what I need: https://a.co/d/ghInHnI ("Harddrive Caliper Pad Pins - Rear") Found a couple options for Can-Am Mavericks or Commanders, which I'm sure are also too big. I will try to get in touch with Zuumav and see if they'll sell the slide pins or a caliper. Good time to ask about a rear brake pedal, too, since that's another thing I haven't found a replacement for. China bikes are definitely inconvenient sometimes, but it beats not riding at all, or going into debt to do so. __________________ Templar X 250: 14t / 42t, Nibbi PE30
	1

Today, 07:48 AM	#4
CC-John Join Date: Jul 2024 Location: Houston, TX Posts: 43	The Templar X brake calipers are a clone of the 1985-1987 Honda CMX250C Rebel front brake caliper. Might be worth taking a chance to see if OEM Honda parts fit.. Here's a link to a parts breakdown on Partszilla.. https://www.partzilla.com/catalog/ho...s9-BDTx2MqMa8B The EBC FA-86 brake pads that fit these bikes also fit a few Kymco models.. Might be worth looking for caliper parts for these. Active SR 50 • 2008 Nexxon 125 E3 2008 Nexxon 50 2008 Hope this helps.. __________________ CC-John "I void warranties" 2024 Templar 250 X 2018 Nissan Frontier (work truck) 2006 Ford F-150 Crew cab (play truck) 1973 Century Resorter 16 (Floating Muscle Car)
	0

Today, 09:27 AM	#5
GypsyR Join Date: Feb 2023 Location: Upstate SC Posts: 329	Is it in these diagrams? Kind of small and hard to see. https://www.chinariders.net/showthread.php?t=34693 __________________ 2023 Templar 250 X
	0

Yesterday, 09:51 PM	#2
Bruces Join Date: May 2018 Posts: 1,644	That’s a calliper pin ,or a calliper slide pin ,you can get them at any auto parts store ,but probably not for your china bike .
	1