![]() |
#1 |
Join Date: Mar 2024
Location: Wollongong NSW Australia
Posts: 6
|
Pz30b
Hi all, hoping someone can point me in the right direction.
A while back I bought a PZ30B pumper carb, marked PD 230217 and have found it has a wacky pilot jet, very short compared to Keihin jet. Would anyone know where to source a PZ30 with standard Keihin jets ? Thanks Mark |
![]() |
![]() |
#3 |
Join Date: Mar 2024
Location: Wollongong NSW Australia
Posts: 6
|
Thanks mate, are these for the PZ30B ?
|
![]() |
![]() |
#4 |
Join Date: May 2018
Posts: 1,631
|
Try Sudco
|
![]() |
![]() |
#6 |
Join Date: May 2018
Posts: 1,631
|
Bummer .
|
![]() |
![]() |
#7 |
Join Date: Aug 2013
Posts: 269
|
I've never heard of a PZ30B.
The keihin clones usually are PZ30. All oko /keihin jets fit Oko, keihin and clone carburetors. That includes PZ and VM carburetors ranging from 18mm and possibly smaller to 32mm (and possibly larger). The PZ30 is a common carburetor used on most China bikes 200-250 cc. Not sure what the B stands for, if that's just to confuse people, or because it's jetted specifically for a type of bike. Either way you're going to rejet it. So I presume the pz30B is just a PZ30. |
![]() |
|
![]() |
![]() |
|
|