09-01-2024, 10:17 PM | #1846 |
Join Date: Jul 2024
Location: Houston, TX
Posts: 40
|
They're heavy gauge rotomolded polyethylene plastic on par with the eye wateringly expensive Pelican brand cases. I don't plan on hauling my cannonball collection so I think it will do just fine for it's intended purpose.
__________________
CC-John "I void warranties" 2024 Templar 250 X 2018 Nissan Frontier (work truck) 2006 Ford F-150 Crew cab (play truck) 1973 Century Resorter 16 (Floating Muscle Car) |
|
09-01-2024, 10:31 PM | #1847 |
Join Date: Sep 2024
Location: South Georgia
Posts: 12
|
That's fantastic, and thanks for advice on the lowering. I think that may push me in the direction of buying one.
|
|
09-01-2024, 10:49 PM | #1848 |
Join Date: Jul 2024
Location: Houston, TX
Posts: 40
|
Here's the thread that shows a bit more detail on modifying the rear shock on the Templar X's. While having a drill press makes doing this mod easier and more precise, it's not absolutely necessary. I went with drilling the "lowering" hole 3/4" center to center with the stock bolt hole and it gave me just about 2 1/2" of drop in seat height. That dimension also left enough "meat" between the two holes that I could return the bike back to stock height without worry of the shock fork failing.
https://www.chinariders.net/showthread.php?t=31860
__________________
CC-John "I void warranties" 2024 Templar 250 X 2018 Nissan Frontier (work truck) 2006 Ford F-150 Crew cab (play truck) 1973 Century Resorter 16 (Floating Muscle Car) |
|
Yesterday, 12:06 AM | #1849 | |
Join Date: Sep 2024
Location: South Georgia
Posts: 12
|
Quote:
|
|
|
Yesterday, 06:27 AM | #1850 | |
Join Date: Jul 2024
Location: Houston, TX
Posts: 40
|
Quote:
I cranked in just enough preload to remove all the static sag in the rear suspension. (the amount the suspensions sags with just the weight of the bike) The bike still has about 3" of sag when I park my 235 pounds on the seat. These bikes are setup with about 4" of sag from the factory based on a 150-180 pound rider.
__________________
CC-John "I void warranties" 2024 Templar 250 X 2018 Nissan Frontier (work truck) 2006 Ford F-150 Crew cab (play truck) 1973 Century Resorter 16 (Floating Muscle Car) |
|
|
Yesterday, 09:53 AM | #1851 | |
Join Date: Jun 2024
Posts: 53
|
Quote:
I found mine just a little soft on the pre-load after I lowered. I did the same 3/4 as CC-John. I ended up putting about 4 or 5 turns on the lock ring to increase mine some. |
|
|
|
|
|
|