![]() |
#2 |
Moderator
Join Date: Jul 2010
Location: Elburn, IL
Posts: 5,928
|
Hiya.
![]()
__________________
Cheesy ______________________________________ 07 Hi Bird Enduro-Flown the Coop 07 Ural Gear Up 79 Honda CX500 77 VeloSolex 4600 V3 73 VeloSolex 3800 I'm making this up as I go.-Indiana Jones Telling me something 'is for my own good', is a fast way to a fat lip.-Me I don't even care about my own problems, why should I care about yours?-Quote on one of my favorite t-shirts |
![]() |
![]() |
#3 |
Join Date: Jun 2023
Location: Big Piney, WY
Posts: 550
|
Welcome to the forum. Is this your first bike? Excellent choice.
__________________
2023 Hawk 250 from XPRO off of Amazon MOUNTAIN MAN RC + MOTO on YouTube "If there were more bloody noses, there would be less wars." - Hagbard Celine "Someday, after mastering the waves, the winds, the tides and gravity, we shall harness for God the energies of love and then, for the second time in the history of the world, man will have discovered fire." - Pierre Teilhard de Chardin |
![]() |
![]() |
#4 |
Join Date: Aug 2024
Posts: 7
|
what size nut is the rear axel ? 2024 x pro templar 250
|
![]() |
![]() |
#5 |
Moderator
Join Date: Oct 2016
Location: Houma, La.
Posts: 11,664
|
Welcome aboard!
__________________
2024 Linhai 300 ATV 4x4 2023 Lifan Lycan 250 Chopper 2023 Venom Evader 2022 Lifan KPX250 2020 Kawasaki Vulcan S (Sold) 2004 Honda ST 1300 2016 Black Hawk 250 (sold) Keihin PE30 carb,125 main,38 slow.Pod filter,ported & decked head 10:1 CR,Direct Ignition Coil,15/40Sprockets,NGK DPR8EIX-9,De-Cat,Dual Oil Cooler,Digital Cluster 2016 Cazador180 XL 2014 Coolster150 JerryHawk250.com My YouTube Channel |
![]() |
![]() |
#6 |
Join Date: Feb 2021
Location: Kansas City
Posts: 2,577
|
32mm, or 1-1/4"
no more than 60 ft lbs
__________________
-NOS 2020 KTM 250SX (2-stroke motocross) |
![]() |
![]() |
#7 |
Join Date: Dec 2020
Location: Dayton Pa.
Posts: 929
|
you mean the lugnut?
|
![]() |
![]() |
#8 |
Join Date: May 2021
Posts: 348
|
Thumper just curious, about these measurements for the rear axle nut? I figured 22mm or 7/8” for the socket or wrench to remove the nut at the most. Both my Hawk 250 DLX and XPRO 150 DLX use a 19 mm wrench or socket for the nut. Just asking because that seems large…
|
![]() |
![]() |
#9 | |
Join Date: Feb 2021
Location: Kansas City
Posts: 2,577
|
Quote:
Check out posts 1 and 4 here for the axle nut photos: https://www.chinariders.net/showthread.php?t=31046 Here is a pic showing the left axle end. Once installed, it can't rotate- It can only slide forward/back in the axle guide/bushing, held back by the adjustment stand-off bolt. This swingarm is beefy compared to the box steel swingarm on the Hawk, Bashan Storm, etc.
__________________
-NOS 2020 KTM 250SX (2-stroke motocross) |
|
![]() |
|
![]() |
![]() |
Tags |
mcgonzo |
|
|