08-15-2024, 07:42 PM
|
#16 |
Join Date: Jun 2023
Location: Big Piney, WY
Posts: 620
|
Here's a tune for sea level on a CSC TT250:
Stock bike with emissions removed and a Nibbi PEZ28 carburetor fitted. Idle jet - 38 Air screw 1 1/4 Maine jet - 115 Needle position 3 My bike @6800': 2023 Hawk 250 JFG Exhaust from Amazon Thin steel head gasket from MotoCult Nibbi PE28FL Air/Fuel Mixture: 1.25 - 1.5 turns out Pilot: 38 Needle: Keihin JJH middle position Main: 105
__________________
2023 Hawk 250 from XPRO off of Amazon MOUNTAIN MAN RC + MOTO on YouTube "If there were more bloody noses, there would be less wars." - Hagbard Celine John 2:15 So He made a whip out of cords and drove all from the temple area, both sheep and cattle; He scattered the coins of the money changers and overturned their tables. Last edited by bigdano711; 08-16-2024 at 02:23 AM. |
|
|
08-15-2024, 08:10 PM
|
#17 |
|
Join Date: Aug 2022
Location: Lincoln CA
Posts: 134
|
This thread has quite a few posted set-ups, including my own: https://chinariders.net/showthread.p...light=database
__________________
-2024 CSC TT250, stage 3 motocult kit, Nibbi PE28FL with custom-made cable controlled choke, modified stock muffler (larger diameter tailpipe), custom oil cooler installation with relocated stock evaporative emissions canister, oversized stainless steel footpegs, IMS folding tip shifter, a few little blingy bolts and bits. More personal preference mods to come. |
|
|
|
|
|
 |
|
|
Linear Mode
