Sumoto 200 Cyclone - Page 3

ChiGongJitsu · 06-29-2008, 08:53 PM

helmet!

yurkia · 06-29-2008, 08:59 PM

YEAH! Where's the helmet?!

Jim · 06-29-2008, 09:31 PM

I only went out there to fire it up for a quick 5 min run around after changing the oil and wasn't planning on actually using it much, just some putting around, and got carried away... Usually I do wear my helmet (as seen in the video)....

I know, I know...

yurkia · 06-29-2008, 10:27 PM

lot can happen in 5 minutes. shame shame. jk

Jim · 06-30-2008, 03:24 AM

Well this time I had the helmet on... I do need some goggles though.

We had a machine over to do some work, and I ended up doing some, I did fine unloading the concrete lock blocks, but I didn't do a very good job at the fine details, cleaning off old hog fuel, I went to deep and not very level. I lack the finese of a good, experienced operator, anyways, after I was done, the real operator cleaned things up and also built us a little "track" type area to play with....

There is still our smaller jump I built with a shovel just past the edge of this picture, but he put in those two other ones, the medium and large, and behind the large there is a banked corner...

It's just after you come down off this one.

DesertDog · 06-30-2008, 09:07 AM

holy cow he has the first cloaking helmet , yuh cant see him, and smaller too.

06-29-2008, 08:59 PM	#32
yurkia Join Date: May 2008 Location: New Franklin, Missouri Posts: 243	YEAH! Where's the helmet?! __________________ '09 Kawasaki KLR 650 '07 Zongshen 200cc Dirt Bike K&N cone filter, FMF Powercore Exhaust, Moose Barkbusters & lotta threadlock.
	0

06-29-2008, 09:31 PM	#33
Jim Join Date: Mar 2007 Location: Abbotsford, BC, Canada Posts: 4,880	I only went out there to fire it up for a quick 5 min run around after changing the oil and wasn't planning on actually using it much, just some putting around, and got carried away... Usually I do wear my helmet (as seen in the video).... I know, I know... __________________ "Be excellent to each other" "We are all human. Let's start to prove it!"
	0

06-29-2008, 10:27 PM	#34
yurkia Join Date: May 2008 Location: New Franklin, Missouri Posts: 243	lot can happen in 5 minutes. shame shame. jk __________________ '09 Kawasaki KLR 650 '07 Zongshen 200cc Dirt Bike K&N cone filter, FMF Powercore Exhaust, Moose Barkbusters & lotta threadlock.
	0

06-30-2008, 03:24 AM	#35
Jim Join Date: Mar 2007 Location: Abbotsford, BC, Canada Posts: 4,880	Well this time I had the helmet on... I do need some goggles though. We had a machine over to do some work, and I ended up doing some, I did fine unloading the concrete lock blocks, but I didn't do a very good job at the fine details, cleaning off old hog fuel, I went to deep and not very level. I lack the finese of a good, experienced operator, anyways, after I was done, the real operator cleaned things up and also built us a little "track" type area to play with.... There is still our smaller jump I built with a shovel just past the edge of this picture, but he put in those two other ones, the medium and large, and behind the large there is a banked corner... It's just after you come down off this one. __________________ "Be excellent to each other" "We are all human. Let's start to prove it!"
	0

06-30-2008, 09:07 AM	#36
DesertDog Join Date: Apr 2008 Posts: 782	holy cow he has the first cloaking helmet , yuh cant see him, and smaller too. __________________ DesertDog
	0

06-29-2008, 08:53 PM	#31
ChiGongJitsu Join Date: Sep 2007 Location: Ohio Posts: 315	helmet!
	0