![]() |
#1 |
Join Date: Jul 2024
Posts: 2
|
Vader 125 Clutch Cover
I broke my clutch cover while adjusting the clutch. I've got it attached with one bolt, for now, but I really don't want dirt to get in there. So far, I'm having no luck finding a replacement. Could anybody here post a website where I might find one? Would a clutch cover from something else work? I've attached a picture.
|
![]() |
![]() |
#2 |
Join Date: Aug 2013
Posts: 254
|
Duct tape a few layers on the in and outside of the cover. Drill a small hole in it. Use a washer under the bolt. The duct tape isn't going to provide steel-like support, but it should be good enough to keep the cover in place (unless there's oil behind it, then it might leak.
|
![]() |
![]() |
#3 |
Join Date: May 2006
Location: Yuma, Arizona
Posts: 9,049
|
Contact Pete at Kronik Racing (he is the owner and runs the show). Very knowledgeable on the Vaders and goes to Boom's headquarters a few times a week to pick up parts and/or bikes.
https://www.kronikracing.com/
__________________
"They say that life's a carousel, spinning fast you got to ride it well..." TGB Delivery Scooter 150 TMEC 200 Enduro--carcass is sadly rotting in the backyard |
![]() |
|
![]() |
![]() |
Tags |
bd125-10 gen 2, clutch cover, vader 125 |
|
|