Please help

[Atemplar'sfriend22]

Hey, I just started working on a china dirt bike for the first time. It's a 2022 templar X 250. I am doing maintenance and upgrades. I have run into a problem and hope that someone can help...I need the front hub assembly with bearings or the entire front rim. It is a J 21x1.60 6 hole. I found that x-pro has one in their catalog but it is listed as "currently unavailable"...
The right side bearing has spun in the housing causing nearly 3mm diameter of damage. I am in the process of looking for an oversized bearing but haven't had any luck yet and my bearing seal, or any other im afraid, will no longer fit once it is cleaned and prepped for the bigger bearing. Please help and thanks.

[Thumper]

The measurements and identity of the OEM bearings are described here.

https://www.chinariders.net/showpost...postcount=4008

AND post #4 in this thread
https://www.chinariders.net/showthread.php?t=32177

The Axel, bearings, seals are identical to those Honda (and KTM) models. There are TONS of sources for ALL of these front axel parts. You can spend a lot, or find bargains. But easy to find

Perfect for replacement hubs are available, and here is an example of assembled wheels available - KKE laced wheel for $200
It looks like the identical wheel that comes with the Templar.
It comes with bearings/seals and spacers.
KKE also makes the front forks and rear shock on the Templar.

[pete]

Hi...
If you are unable to get a new hub...

what is the bearing number.. or the sizes ID and OD..
the bearing is most lightly a deep groove ball race.. 62XX maybe a (6203)?
03 = 17mm bore...
So the next size bigger in the outer race will be a 63XX

Here is a list of possible bearings from the SKF catalogue..

15mm bore..
6002 = 32mm OD
6202 = 35mm OD
6302 = 42mm OD

17mm bore..
6203 = 40mm OD
6303 = 47mm OD
6403 = 62mm OD

20mm bore..
6204 = 47mm OD
6304 = 52mm OD
6404 = 72mm OD


.

[Thumper]

2004 02-08 HONDA CRF250R CRF250X CRF450R Front Wheel Rim Wheel Hub Rotor 21X1.60