![]() |
#1 |
Join Date: Jun 2021
Posts: 56
|
Where can I get shark 250 front brake caliper
So I have this 17" 19" Chinese enduro that has a single cylinder front brake that looks like the posted pictures and I'm trying to find a replacement. It's a shark 250 enduro. Where can I get one that will work?
|
![]() |
![]() |
#2 |
Join Date: Jun 2021
Posts: 56
|
|
![]() |
![]() |
#3 |
Moderator
Join Date: Oct 2016
Location: Houma, La.
Posts: 11,664
|
__________________
2024 Linhai 300 ATV 4x4 2023 Lifan Lycan 250 Chopper 2023 Venom Evader 2022 Lifan KPX250 2020 Kawasaki Vulcan S (Sold) 2004 Honda ST 1300 2016 Black Hawk 250 (sold) Keihin PE30 carb,125 main,38 slow.Pod filter,ported & decked head 10:1 CR,Direct Ignition Coil,15/40Sprockets,NGK DPR8EIX-9,De-Cat,Dual Oil Cooler,Digital Cluster 2016 Cazador180 XL 2014 Coolster150 JerryHawk250.com My YouTube Channel |
![]() |
![]() |
#4 | |
Join Date: Jun 2021
Posts: 56
|
Quote:
Last edited by jatgm12; 05-09-2024 at 12:57 PM. |
|
![]() |
![]() |
#5 | |
Join Date: Jun 2021
Posts: 56
|
Quote:
Is it this one if taken off the mount? Because the bolt spacing is not 2.4ish inches on this one. |
|
![]() |
![]() |
#6 |
Join Date: Apr 2017
Location: Omaha, NE
Posts: 8,100
|
I can't even find that style for the front. I almost wonder if it wouldn't be easier to change out for a 2 piston caliper like the Hawk and other standard fork bikes use. The mounts on the fork lower may be the same. I could measure the spacing of mine to see if it is.
__________________
Hawk Information and Resource guide: http://www.chinariders.net/showthread.php?t=20331 2018 Hawk 250 - Full Mod list here. http://www.chinariders.net/showpost....62&postcount=1 2024 Royal Enfield Shotgun 650 https://chinariders.net/showthread.php?t=34124 |
![]() |
![]() |
#7 | |
Join Date: Jun 2021
Posts: 56
|
Quote:
Can I use a two piston one for this disc? Is it compatible? Which one should I use? I'm a bit confused really. |
|
![]() |
![]() |
#8 |
Join Date: Jun 2021
Posts: 56
|
Any idea if the hawk front brakes would mount?
|
![]() |
![]() |
#9 |
Join Date: Apr 2017
Location: Omaha, NE
Posts: 8,100
|
No clue, but the bolt spacing on the forks of the Hawk is 2.4 inches/61mm (roughly) from center to center.
__________________
Hawk Information and Resource guide: http://www.chinariders.net/showthread.php?t=20331 2018 Hawk 250 - Full Mod list here. http://www.chinariders.net/showpost....62&postcount=1 2024 Royal Enfield Shotgun 650 https://chinariders.net/showthread.php?t=34124 |
![]() |
![]() |
#10 |
Join Date: Jun 2021
Posts: 56
|
FVRITO Brake Caliper and Pads for 110cc 125cc 150cc 200cc 250cc 196cc 6.5HP Coleman kt196 yerf dog gx150 Kandi Baja RTK200 Go Kart Dune Buggy Taotao Roketa Sunl Kazuma Chinese ATV Quad Golden https://www.amazon.com/dp/B097ZN67QY...KR&starsLeft=1
Do you think this will fit? |
![]() |
![]() |
#11 |
Join Date: Jun 2021
Posts: 56
|
Just finished mounting some of the engine mounts, but wanna try to make sure I can get a brake caliper.
|
![]() |
![]() |
#12 | |
Join Date: Aug 2013
Location: Goodyear, Arizona
Posts: 412
|
Quote:
__________________
2020 Tao TBR7 9.3:1 PnP head CRF230F exhaust 4 degree advance key 290 degree cam Nibbi PE30 and cone filter Front fork brace |
|
![]() |
![]() |
#13 |
Join Date: Jun 2021
Posts: 56
|
Oh, where can I get a compatible caliper for it cheap? I already have the line and the master cylinder/brake handle.
|
![]() |
![]() |
#15 |
Join Date: Jun 2021
Posts: 56
|
So I found this that does look to be identical
https://partsroketa.com/product/fron...-db-41h-250cc/ But I just need a caliper. Also it's expensive. It does look like a tbr7 has the same front caliper too. Does anyone know where I can get a tbr7 front caliper? Only difference is a longer brake pad. It should work fine. |
![]() |
|
![]() |
![]() |
|
|