Electrical problem with new BD125-2

DB · 05-31-2024, 08:25 PM

I received my new BD125-2 this morning (Powersportsmax, $850 + $320 shipping). In 3 hours I had it uncrated and assembled.

However it's totally dead electrically. No lights, no horn, no starter.

The battery is good, it shows 12.8v. Inside the battery compartment I found a fuse holder with a blown fuse. Installed the spare fuse - no help, still dead. I couldn't see any loose wires or unconnected connectors or anything else that looks wrong.

I emailed the service dept in China and hope to get a response Monday.

If anyone has any suggestions I'd love to hear them!

dirtbkr188 · 05-31-2024, 09:34 PM

Any electrical wiring going to the clutch lever/perch area, by chance? Some bikes have a safety feature where you need to pull the clutch lever in in order for the bike to start. Other bikes have a similar safety setup where the kickstand has to be down in order for the bike to start

XLsior · 05-31-2024, 09:51 PM

Check earth/ground wire and connections also

DB · 06-01-2024, 08:56 PM

I got it fixed. The problem turned out to be just the dead fuse.

A bad lead on my voltmeter was the rest of the problem.

Thanks for your suggestions!

05-31-2024, 08:25 PM	#1
DB Join Date: May 2024 Posts: 5	Electrical problem with new BD125-2 I received my new BD125-2 this morning (Powersportsmax, $850 + $320 shipping). In 3 hours I had it uncrated and assembled. However it's totally dead electrically. No lights, no horn, no starter. The battery is good, it shows 12.8v. Inside the battery compartment I found a fuse holder with a blown fuse. Installed the spare fuse - no help, still dead. I couldn't see any loose wires or unconnected connectors or anything else that looks wrong. I emailed the service dept in China and hope to get a response Monday. If anyone has any suggestions I'd love to hear them!
	0

05-31-2024, 09:34 PM	#2
dirtbkr188 Join Date: Aug 2009 Posts: 577	Any electrical wiring going to the clutch lever/perch area, by chance? Some bikes have a safety feature where you need to pull the clutch lever in in order for the bike to start. Other bikes have a similar safety setup where the kickstand has to be down in order for the bike to start
	0

05-31-2024, 09:51 PM	#3
XLsior Join Date: Aug 2020 Location: Australia Posts: 1,453	Check earth/ground wire and connections also
	0

06-01-2024, 08:56 PM	#4
DB Join Date: May 2024 Posts: 5	I got it fixed. The problem turned out to be just the dead fuse. A bad lead on my voltmeter was the rest of the problem. Thanks for your suggestions!
	1