![]() |
#1 |
Join Date: May 2024
Posts: 5
|
Electrical problem with new BD125-2
I received my new BD125-2 this morning (Powersportsmax, $850 + $320 shipping). In 3 hours I had it uncrated and assembled.
However it's totally dead electrically. No lights, no horn, no starter. The battery is good, it shows 12.8v. Inside the battery compartment I found a fuse holder with a blown fuse. Installed the spare fuse - no help, still dead. I couldn't see any loose wires or unconnected connectors or anything else that looks wrong. I emailed the service dept in China and hope to get a response Monday. If anyone has any suggestions I'd love to hear them! |
![]() |
![]() |
#2 |
Join Date: Aug 2009
Posts: 550
|
Any electrical wiring going to the clutch lever/perch area, by chance? Some bikes have a safety feature where you need to pull the clutch lever in in order for the bike to start. Other bikes have a similar safety setup where the kickstand has to be down in order for the bike to start
|
![]() |
![]() |
#3 |
Join Date: Aug 2020
Location: Australia
Posts: 1,344
|
Check earth/ground wire and connections also
|
![]() |
|
![]() |
![]() |
Tags |
bd125-2, electrical problem |
|
|