02-03-2024, 07:30 PM | #1 |
Join Date: Sep 2019
Posts: 22
|
Electrical question
Hey all . What is minimum needed for this to run ? Just the coil bolted to the engine ? I'm not worried about lights or e-start . Any help appreciated . |
|
02-03-2024, 07:35 PM | #2 |
Moderator
Join Date: Oct 2016
Location: Houma, La.
Posts: 11,708
|
You will need a cdi and voltage regulator. You have to figure out if you had an ac or dc system in order to get the correct cbi.
__________________
2024 Linhai 300 ATV 4x4 2023 Lifan Lycan 250 Chopper 2023 Venom Evader 2022 Lifan KPX250 2020 Kawasaki Vulcan S (Sold) 2004 Honda ST 1300 2016 Black Hawk 250 (sold) Keihin PE30 carb,125 main,38 slow.Pod filter,ported & decked head 10:1 CR,Direct Ignition Coil,15/40Sprockets,NGK DPR8EIX-9,De-Cat,Dual Oil Cooler,Digital Cluster 2016 Cazador180 XL 2014 Coolster150 JerryHawk250.com My YouTube Channel |
|
02-03-2024, 10:45 PM | #3 |
Join Date: Feb 2021
Location: Kansas City
Posts: 2,659
|
That is probably an AC CDI unit (the smaller type). If the whole thing was intact on a bike with a working battery, the simple test is to check if the CDI unit is powered 12V when you turn the key on. That won't work here, but the DC units are bigger. Pretty sure it can't be DC.
That wiring harness has a voltage regulator (the black thing with fins), so you need some sort of battery to accept the charge. A small 12V battery should be fine. I am sure that you will have plenty of power to run lights. It's already baked into the system.
__________________
-NOS 2020 KTM 250SX (2-stroke motocross) |
|
|
|
|
|