![]() |
#16 |
Join Date: Oct 2023
Location: DFW
Posts: 64
|
Spacers used
Thanks Megadan for sizing!
https://www.amazon.com/dp/B09DK5PPRW...t_details&th=1 https://www.amazon.com/dp/B09DK8LRXZ...t_details&th=1 Fit perfectly. Still was a total PITA to get them in there!
__________________
DFW HMCM(SW)[Ret] 2020 FLHTK 2023 EX400G Ninja 400 2023 Hawk DLX |
![]() |
![]() |
#17 |
Join Date: Oct 2023
Location: DFW
Posts: 64
|
Pod and filter
Did the air box delete and added the pod filter and crankcase breather filter. I did notice I had a loss of power and top end after this install.
https://www.amazon.com/dp/B0881KNMCM...roduct_details https://www.amazon.com/dp/B0146I3H42...roduct_details
__________________
DFW HMCM(SW)[Ret] 2020 FLHTK 2023 EX400G Ninja 400 2023 Hawk DLX |
![]() |
![]() |
#18 |
Join Date: Oct 2023
Location: DFW
Posts: 64
|
Rear sprocket
I’m having trouble sourcing a JT 42 rear sprocket on the new DLX. They’re all 6 bolt patterns. The 43T seems to not fit:
https://www.amazon.com/gp/product/B0...KIKX0DER&psc=1 Any ideas why this one wouldn’t fit? Thanks!
__________________
DFW HMCM(SW)[Ret] 2020 FLHTK 2023 EX400G Ninja 400 2023 Hawk DLX |
![]() |
![]() |
#19 |
Join Date: Oct 2023
Location: DFW
Posts: 64
|
Review
I would think so to, but there is a specific review saying it won’t fit the new DLX…
I’ve bought other parts that haven’t fit. Will be glad when these bikes get even better aftermarket support.
__________________
DFW HMCM(SW)[Ret] 2020 FLHTK 2023 EX400G Ninja 400 2023 Hawk DLX |
![]() |
![]() |
#20 |
Join Date: Jun 2023
Location: South Of jacksonville Florida / the Burg
Posts: 10
|
Bought so a 23 DLX and read about all the stuff I needed to do! . Rec bike and was astounded at all the improvements that were made after 2018 list on this website.
looked like they were directly looking at what you all talked about! JW |
![]() |
![]() |
#21 |
Join Date: Oct 2023
Location: DFW
Posts: 64
|
Replaced rear brake line with: https://www.amazon.com/gp/product/B0...e?ie=UTF8&th=1
Fantastic results. Brake is very firm and immediately responsive. However, the brake switch has already failed! So today I’m installing: https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1 Will report results and some pics after I’m finished.
__________________
DFW HMCM(SW)[Ret] 2020 FLHTK 2023 EX400G Ninja 400 2023 Hawk DLX |
![]() |
![]() |
#22 | |
Join Date: Oct 2023
Location: Western PA
Posts: 285
|
Quote:
__________________
2022 Hawk DLX EFI * 17T Front / 47T Rear / 428 x-ring chain * Kenda K-760 front + rear * Banjo brake light switch * LED headlight + front turn signals * Custom cutting board skid plate * Debadged (I don't like to brag about the superior strength!) * Top speed, GPS verified, as equipped: 68 mph (so far) |
|
![]() |
![]() |
#23 |
Join Date: Dec 2020
Location: Dayton Pa.
Posts: 930
|
Mine all stock brakes and no problems,changed pads once in 8000 miles.17 front and i think 37 on back wheel,70 mph top speed. Think it might go a little faster,will find out in the morning.2021 TBR7 that i thought the transmission was going bad,but just a junk chain i installed around 3000 miles. Never saw a chain so kinked up,it was cheap my fault.
|
![]() |
|
![]() |
![]() |
Tags |
2023, rps hawk |
|
|