Clutch Conversion Time = Hydro Mod

Rider2016 · 05-27-2023, 06:12 AM

Ok time for another RX4 project.

The clutch as we all know has the release grace of a hippo in a phone booth, off road, IT SUCKS!

So, going to retro a hydraulic clutch system to see how that works.

I know there's pros and cons to cable Vs. Hydro... But just about every top ADV uses hydro...

So we'll see...

Oh and the last MOD... the TFT conversion... worked great =)

Deckard_Cain · 05-27-2023, 11:31 AM

I'm going to convert to hydraulic clutch on my '20 Hawk as well. Not that the cable clutch is bad, or hard to pull.

pyoungbl · 05-27-2023, 12:24 PM

Please post lots of details about your progress. If nothing less, hydro clutch action eliminates the possibility of a broken clutch cable as well as the friction associated with the cable.

Rider2016 · 05-28-2023, 08:20 AM

I have all the parts but the slave cylinder, it will be here monday. We just did some off road work yesterday..... If the hyro conversion doesn't cure it, i think the RX4 will be going buy buy..

bogieboy · 05-28-2023, 12:45 PM

I have been full hydro clutch on my roketa for years now.... my bike sits out in the elements and i lost 3 cables to rust in 3 years... dont have that issue with hydro....

outboardr · 05-29-2023, 11:59 PM

Rider, i will say this, my Rx4 clutch is very Yamazuki aka Kawonda, feels like any of my Japanese or Italian bikes. Feathers beautifully and unlike the reported issues in revzilla himalayan vs rx4 video

What several of us have found is 1. Switch to NGK or Denso plug if u r still running the oem Torch 2. If yours is a 2019/20 model either flash your ecu or get an ecu with revised tune. See advrider rx4 thread from March until today. The difference is real.
Anyway, just trying to help, and will note your hydro clutch results.
( I have seen RX3 with this mod. I have the OTOM cable bracket on my RX3, with the extended shift shaft lever.)

db_moto · 07-30-2023, 03:17 PM

I like the clutch feel of my RX4. I keep the cable lubricated and adjusted. I have the original clutch at 26k miles. I've had bikes with hydraulic clutches and I prefer the simplicity of a cable as long as the pull isn't hard.

05-27-2023, 06:12 AM	#1
Rider2016 Join Date: Jun 2016 Posts: 41	Clutch Conversion Time = Hydro Mod Ok time for another RX4 project. The clutch as we all know has the release grace of a hippo in a phone booth, off road, IT SUCKS! So, going to retro a hydraulic clutch system to see how that works. I know there's pros and cons to cable Vs. Hydro... But just about every top ADV uses hydro... So we'll see... Oh and the last MOD... the TFT conversion... worked great =)
	1

05-29-2023, 11:59 PM	#6
outboardr Join Date: Jan 2022 Posts: 44	Rider, i will say this, my Rx4 clutch is very Yamazuki aka Kawonda, feels like any of my Japanese or Italian bikes. Feathers beautifully and unlike the reported issues in revzilla himalayan vs rx4 video What several of us have found is 1. Switch to NGK or Denso plug if u r still running the oem Torch 2. If yours is a 2019/20 model either flash your ecu or get an ecu with revised tune. See advrider rx4 thread from March until today. The difference is real. Anyway, just trying to help, and will note your hydro clutch results. ( I have seen RX3 with this mod. I have the OTOM cable bracket on my RX3, with the extended shift shaft lever.) Last edited by outboardr; 05-30-2023 at 12:09 AM. Reason: Clarity
	0

07-30-2023, 03:17 PM	#7
db_moto Join Date: Sep 2021 Location: Indiana Posts: 13	I like the clutch feel of my RX4. I keep the cable lubricated and adjusted. I have the original clutch at 26k miles. I've had bikes with hydraulic clutches and I prefer the simplicity of a cable as long as the pull isn't hard. __________________ 2020 Fleet: CSC RX4, Hawk 250 DLX, Moto Guzzi V85tt “You are not entitled to your opinion. You are entitled to your informed opinion. No one is entitled to be ignorant.” -Harlan Ellison- “The most terrifying words in the English language are: I'm from the government and I'm here to help.” ― Ronald Reagan-
	0

05-27-2023, 11:31 AM	#2
Deckard_Cain Join Date: Aug 2019 Location: Bay City, MI Posts: 400	I'm going to convert to hydraulic clutch on my '20 Hawk as well. Not that the cable clutch is bad, or hard to pull.
	1

05-27-2023, 12:24 PM	#3
pyoungbl Join Date: Feb 2016 Location: Portsmouth, Virginia, USA Posts: 632	Please post lots of details about your progress. If nothing less, hydro clutch action eliminates the possibility of a broken clutch cable as well as the friction associated with the cable.
	1

05-28-2023, 08:20 AM	#4
Rider2016 Join Date: Jun 2016 Posts: 41	I have all the parts but the slave cylinder, it will be here monday. We just did some off road work yesterday..... If the hyro conversion doesn't cure it, i think the RX4 will be going buy buy..
	0

05-28-2023, 12:45 PM	#5
bogieboy Join Date: May 2013 Location: finger lakes NY Posts: 2,062	I have been full hydro clutch on my roketa for years now.... my bike sits out in the elements and i lost 3 cables to rust in 3 years... dont have that issue with hydro....
	0