![]() |
#1 |
Join Date: Jun 2023
Location: Tennessee
Posts: 2
|
![]()
I am a new owner of a ‘22 Brozz recon and have been doing some upgrades. I just recently attempted to install some upgraded clutch springs and sheared off one of the bolts holding the springs in and I’m not sure how to go about fixing this. My question is should I replace the whole clutch basket or just the screws and where can I get the correct parts? If anyone can help it would be greatly appreciated.
|
![]() |
![]() |
#2 |
Join Date: Jan 2021
Location: Lehigh Valley Area
Posts: 157
|
I did the same with my TBR7, I pulled the whole basket out, and using a drill and small drill bit, was able to drill into the bolt, from the front(not the head side) and as the drill bit, well bit into the bolt, it screwed the bolt out.
Once out, I bought new bolts at like a Lowes. I believe the bolts' torque is measured in-lbs, I just hand tighten them with lock-tite. It's what I did, hope all goes well. ![]()
__________________
- My 3 Bikes: 1. TaoTao TBR7 2. Boom Vader Gen 2 (BD125-10) 3. 1978 Suzuki SG750 --------------------------------------------- Testing a YouTube Channel ![]() |
![]() |
![]() |
#3 |
Join Date: Jun 2023
Location: Tennessee
Posts: 2
|
I’ll try that thank you sir
|
![]() |
![]() |
#4 | |
Join Date: Apr 2017
Location: Omaha, NE
Posts: 8,098
|
Quote:
__________________
Hawk Information and Resource guide: http://www.chinariders.net/showthread.php?t=20331 2018 Hawk 250 - Full Mod list here. http://www.chinariders.net/showpost....62&postcount=1 2024 Royal Enfield Shotgun 650 https://chinariders.net/showthread.php?t=34124 |
|
![]() |
|
![]() |
![]() |
Tags |
brozz 250, clutch assembly, clutch issues |
|
|