![]() |
#1 |
Join Date: Jun 2023
Posts: 6
|
![]()
I’m about to change the front forks and my swingarm. I wanted to make sure all grom oem parts would fit the Vader. I’ve only seen one other thread on it and it didn’t say too much. Should I change the stem aswell? Just want to make sure everything will fit on before I get all this. Vader is a beasttt
|
![]() |
![]() |
#2 |
Join Date: Jun 2023
Posts: 6
|
I’m planning to get a set of front forks off of AliExpress that Goblin mentioned. Will the Grom OEM swingarm still work? If I’m wanting to change the steering stem aswell where should I find a replacement parts?
|
![]() |
![]() |
#4 |
Join Date: Jun 2021
Posts: 251
|
I am using a Grom swing arm. I had to mill down the bushings to get it to fit. I am using Grom axle bolts and cush drive dampener. Still haven't changed the bearings to the Grom bearings but that will happen one day.
I'm using some forks from AliExpress that were a direct swap. Those items are good fits.
__________________
2020 Vader X-Pro X-7 2019 Kawasaki Ninja ex400 2022 Lifan KPX 250 |
![]() |
|
![]() |
![]() |
Tags |
125, forks, grom, swingarm, vader |
|
|