![]() |
#1 |
Join Date: Mar 2023
Posts: 1
|
Carburetor Swap
So im needing some input due to my lack of motorcycle mechanic knowledge. i recently bought a 2007 baja phoenix 250. now the engine is based off of a rebel 250. they came carb on my bike is a single barrel sheng way carb that is no longer produced. and they run about $350 USED. now after some looking and my knowledge on the carb after taking it apart 1,000 times i was thinking that i would swap in the the rebels 2 barrel carb setup. i would just need to buy the flanges and the new carb but i was wondering if that would mess something up. if it would get too much fuel. how i would run the airbox/filters. if i have the clearance to fit the carb without cutting or filing some of the frame down to fit it. any help or ideas would be awesome. thank you!
|
![]() |
![]() |
#2 |
Join Date: Aug 2019
Location: Bay City, MI
Posts: 398
|
Honestly, adapting the Honda parts seems like a lot of work for little gain.
I'd likely just find a good Mikuni clone carb and fit it to the engine, tune and be done with it. A VM26 or similar- whatever size is appropriate. |
![]() |
![]() |
#3 |
Join Date: Dec 2017
Location: Arizona
Posts: 89
|
I have a Honda Nighthawk 250 (same engine as the Rebel) and I saw a YouTube video of a guy that installed a Nibbi carburetor.
__________________
2022 Royal Enfield Classic 350 1993 Honda Nighthawk 250 2006 Jialing 200cc Dual Sport |
![]() |
![]() |
#4 |
Join Date: Dec 2020
Location: Dayton Pa.
Posts: 930
|
Like cain said ,just buy a new one that fits. Get a jet kit for your new carburetor and should be all good.
|
![]() |
|
![]() |
![]() |
Tags |
250cc, carburetor |
|
|