![]() |
#1 |
Join Date: Jan 2023
Location: Yelm, Washington
Posts: 10
|
![]()
In first gear if I let off on the throttle quickly and then apply some throttle the bike jerks. Does anybody know how to make the throttle tamer?
|
![]() |
![]() |
#2 |
Join Date: Nov 2022
Location: Pennsyltuckey
Posts: 309
|
Often what you're describing is caused by drivetrain slack. Check that your chain is properly tensioned. You might also try loosening the throttle cable a bit. GL
__________________
22 Templar 250 |
![]() |
![]() |
#3 |
Join Date: Jan 2023
Location: Yelm, Washington
Posts: 10
|
Touchy throttle
I have the Lycan 250cc and I have the same problem. Searching throughout the internet a bunch of replys say that there is too much slack in the throttle. I checked the manual and the slack should only be 2 to 6 mm for the bike. I will also check the slack in the drive chain. I found a couple of things that need readjustment. I guess they just slap the bikes together.
|
![]() |
![]() |
#4 |
Join Date: Dec 2020
Location: Dayton Pa.
Posts: 929
|
You got it,the faster built. Will make more money,China thing.
|
![]() |
![]() |
#5 |
Join Date: Jan 2023
Location: Yelm, Washington
Posts: 10
|
After adjusting the slack in the throttle I can start in first gear from a dead stop with no jerking. When I shift from 1st to 2nd and letting out the clutch it has some jerking. Not much but still not smooth. Is it just me? Do I have to get used to it? I had a Honda Goldwing and there was no jerking.
|
![]() |
|
![]() |
![]() |
|
|