Boom vader dieing after riding please help - Page 2

TominMO · 09-22-2022, 02:46 PM

Quote:

Originally Posted by JerryHawk250

That is incorrect. The idle mixture screw is on the bottom of the carb between the bowel and engine side of carb.

Thanks for the correction. Do you mean that place that has the green painted line?

**JerryHawk250** · 09-22-2022, 02:49 PM

Quote:

Originally Posted by TominMO

Thanks for the correction. Do you mean that place that has the green painted line?

Yes.

TominMO · 09-22-2022, 02:52 PM

Quote:

Originally Posted by JerryHawk250

Yes.

It looks like that might be accessible on the bike with a short screwdriver bit, turned by a needle-nose pliers or maybe even a bit ratchet like this one:

https://www.amazon.com/HORUSDY-23-Pi...20-spons&psc=1

**JerryHawk250** · 09-22-2022, 02:56 PM

Quote:

Originally Posted by TominMO

It looks like that might be accessible on the bike with a short screwdriver bit, turned by a needle-nose pliers or maybe even a bit ratchet like this one:

https://www.amazon.com/HORUSDY-23-Pi...20-spons&psc=1

Here's the proper tool for that. https://www.amazon.com/Motion-Pro-08...sr=1-8-catcorr

TominMO · 09-22-2022, 03:32 PM

Ouch! That tool costs as much as the carb. The 90 degree ratchet would be far better, if it fits in there width-wise. Here is a much better-looking set. The 41-piece version has both long and short bits. Once in a while tools like these are very handy to have lying around.
https://www.amazon.com/TOMMARS-102-P...7&sr=8-25&th=1

I have this cheapo from Harbor Freight. Might do the job as is, or might need a longer bit.
https://www.harborfreight.com/8-piec...ver-92630.html

**JerryHawk250** · 09-22-2022, 03:38 PM

Quote:

Originally Posted by TominMO

Ouch! That tool costs as much as the carb. The 90 degree ratchet would be far better, if it fits in there width-wise. Here is a much better-looking set. The 41-piece version has both long and short bits. Once in a while tools like these are very handy to have lying around.
https://www.amazon.com/TOMMARS-102-P...7&sr=8-25&th=1

There are cheaper versions of it. https://www.amazon.com/dp/B09STJRP67...NsaWNrPXRydWU=

dirtbkr188 · 09-22-2022, 03:45 PM

On the Mikuni-clone VM22/26 carb, it is a fuel adjustment screw under the intake and in front of the float bowl. It is turned IN to lean the fuel mixture, and turned OUT to richen the mixture. The idle adjustment screw is located on the right side of the carb, as mounted on the manifold/engine.
THIS is the replacement fuel screw for the PITA stock one.

09-22-2022, 03:32 PM	#20
TominMO Join Date: Sep 2021 Location: De Soto, MO Posts: 1,977	Ouch! That tool costs as much as the carb. The 90 degree ratchet would be far better, if it fits in there width-wise. Here is a much better-looking set. The 41-piece version has both long and short bits. Once in a while tools like these are very handy to have lying around. https://www.amazon.com/TOMMARS-102-P...7&sr=8-25&th=1 I have this cheapo from Harbor Freight. Might do the job as is, or might need a longer bit. https://www.harborfreight.com/8-piec...ver-92630.html __________________ 2021 Lifan Xpect--sold 2022 Lifan KPX 1972 Honda CT90--The Carrot 1969 Honda CT90--The Tomahto Cheesy is the WDK (workplace drama king). Now retired. Nope, back in the saddle. Nope, finally retired. Climate: The Movie https://www.youtube.com/watch?v=A24fWmNA6lM How our government really works https://www.youtube.com/watch?v=QjadCd0VRBw Question all authority.....think for yourself
	0

09-22-2022, 03:45 PM	#22
dirtbkr188 Join Date: Aug 2009 Posts: 577	On the Mikuni-clone VM22/26 carb, it is a fuel adjustment screw under the intake and in front of the float bowl. It is turned IN to lean the fuel mixture, and turned OUT to richen the mixture. The idle adjustment screw is located on the right side of the carb, as mounted on the manifold/engine. THIS is the replacement fuel screw for the PITA stock one.
	1