07-24-2022, 05:08 AM | #1 |
Join Date: Aug 2021
Posts: 30
|
Pickup re-locator
someone found a pickup relocator to advance o retard ignition ?? flywheel key it’s easier but it seams unavaible at a the moment.. so.. plan B.. or Plan C with a programmable cdi..
|
|
07-24-2022, 03:26 PM | #2 |
Join Date: Dec 2020
Location: Dayton Pa.
Posts: 941
|
You don't need that key, just advance flywheel little bit at a time. two tries for me,runs a lot better
|
|
07-24-2022, 04:27 PM | #3 |
Join Date: Aug 2021
Posts: 30
|
How did you advance it without the key ?
|
|
07-24-2022, 05:53 PM | #4 |
Join Date: Dec 2020
Location: Dayton Pa.
Posts: 941
|
loosen flywheel nut remove key ,then put flywheel back on just advance flywheel a little bit. dose not take much. made my bike a little better,just a little
|
|
07-25-2022, 08:54 AM | #5 |
Join Date: Jun 2021
Posts: 80
|
It's a tapered shaft, basically turns it into a press fit. Key is mostly for alignment.
|
|
07-25-2022, 10:27 AM | #6 |
Join Date: Sep 2014
Posts: 1,913
|
On many engines you can just widen the mounting holes on the pickup coil so you can move it a couple of degrees advanced or retarded.
|
|
07-25-2022, 11:14 AM | #7 |
Moderator
Join Date: Oct 2016
Location: Houma, La.
Posts: 11,707
|
I measured the offset in my 4 degree offset key. The offset was 0.7mm. Take a stock key and have it milled then rotate the flywheel against the offset and tighten down.
__________________
2024 Linhai 300 ATV 4x4 2023 Lifan Lycan 250 Chopper 2023 Venom Evader 2022 Lifan KPX250 2020 Kawasaki Vulcan S (Sold) 2004 Honda ST 1300 2016 Black Hawk 250 (sold) Keihin PE30 carb,125 main,38 slow.Pod filter,ported & decked head 10:1 CR,Direct Ignition Coil,15/40Sprockets,NGK DPR8EIX-9,De-Cat,Dual Oil Cooler,Digital Cluster 2016 Cazador180 XL 2014 Coolster150 JerryHawk250.com My YouTube Channel |
|
07-25-2022, 11:21 AM | #8 |
Join Date: Jan 2020
Posts: 277
|
You could even mill your own key provided you had a couple of spares to play with, a belt sander, and a Harbor Freight micrometer.
|
|
|
|
|
|