Winch for Tao Raptor 200

CottageWaffles · 09-24-2020, 09:33 AM

Hey guys,

I am looking to get a winch to mount on my Raptor 200. Before I order one I was hoping to get some words of wisdom from the community.

Are most winches adjustable to be mounted on any atv? I am worried I will order one but I wont be able to mount it.

Is there anything I should look out for while looking at winches? 1500lb is more than enough but I saw some cheap 2000lb winches as well.

Any recommendations?

Thanks!

**JerryHawk250** · 09-24-2020, 10:22 AM

I put a 2500# Harbor Freight winch on my daughters UTV which is a good bit heavier than the ATV. It had no problems winching the UTV out of a deep ditch. You can always catch them on sale for around $50. They also sell a mounting plate for it too. Here's a link to the thread on my install on the UTV. http://www.chinariders.net/showthread.php?t=22711

pillihp · 09-28-2020, 10:03 PM

I put a harbor freight badlands winch on mine. I pulled a stalled out 4x4 quad out of a deep(as deep as the quad) cut with it without any issues.

Here’s my setup
https://www.chinariders.net/showthread.php?t=25848

ZahraM5 · 07-10-2022, 07:32 AM

I would suggest Smittybilt 97495 XRC, as it has powerful cable with a 100-foot length.

09-24-2020, 09:33 AM	#1
CottageWaffles Join Date: May 2020 Location: Ontario Posts: 15	Winch for Tao Raptor 200 Hey guys, I am looking to get a winch to mount on my Raptor 200. Before I order one I was hoping to get some words of wisdom from the community. Are most winches adjustable to be mounted on any atv? I am worried I will order one but I wont be able to mount it. Is there anything I should look out for while looking at winches? 1500lb is more than enough but I saw some cheap 2000lb winches as well. Any recommendations? Thanks!
	0

09-24-2020, 10:22 AM	#2
JerryHawk250 Moderator Join Date: Oct 2016 Location: Houma, La. Posts: 11,714	I put a 2500# Harbor Freight winch on my daughters UTV which is a good bit heavier than the ATV. It had no problems winching the UTV out of a deep ditch. You can always catch them on sale for around $50. They also sell a mounting plate for it too. Here's a link to the thread on my install on the UTV. http://www.chinariders.net/showthread.php?t=22711 __________________ 2024 Linhai 300 ATV 4x4 2023 Lifan Lycan 250 Chopper 2023 Venom Evader 2022 Lifan KPX250 2020 Kawasaki Vulcan S (Sold) 2004 Honda ST 1300 2016 Black Hawk 250 (sold) Keihin PE30 carb,125 main,38 slow.Pod filter,ported & decked head 10:1 CR,Direct Ignition Coil,15/40Sprockets,NGK DPR8EIX-9,De-Cat,Dual Oil Cooler,Digital Cluster 2016 Cazador180 XL 2014 Coolster150 JerryHawk250.com My YouTube Channel
	1

09-28-2020, 10:03 PM	#3
pillihp Join Date: Jan 2020 Posts: 27	I put a harbor freight badlands winch on mine. I pulled a stalled out 4x4 quad out of a deep(as deep as the quad) cut with it without any issues. Here’s my setup https://www.chinariders.net/showthread.php?t=25848
	1

07-10-2022, 07:32 AM	#4
ZahraM5 Join Date: Jun 2022 Posts: 4	I would suggest Smittybilt 97495 XRC, as it has powerful cable with a 100-foot length.
	0