Needed: CG250 4 Stroke Motor mounts

BigMook · 07-04-2022, 06:09 PM

Hi all,

I need help. I bought a CG250 clone from Alibaba. I am mounting it on a CB250 Nighthawk Frame. The stock mounts are close but not quite right. Does anyone know where I can scare you the front and rear motor mounts? The only ones that work are the too 2 mount plates. I sure would appreciate some direction, even if it is modification advice.

franque · 07-05-2022, 09:10 AM

Post up, or link us to some pictures so we can see what you're dealing with. I've never heard of somebody doing the swap, though I've heard it's possible.

**JerryHawk250** · 07-05-2022, 09:22 AM

You will more than likely be better off fabricating mounts form steel plate. Even if you found mounts they probably won't be exactly what you need.

franque · 07-05-2022, 02:00 PM

Also, the rear mounts are in the frame. Post up a picture of the motor, so we know what you're dealing with, the left and right sides.

07-04-2022, 06:09 PM	#1
BigMook Join Date: Jul 2022 Location: Nevada, USA Posts: 2	Needed: CG250 4 Stroke Motor mounts Hi all, I need help. I bought a CG250 clone from Alibaba. I am mounting it on a CB250 Nighthawk Frame. The stock mounts are close but not quite right. Does anyone know where I can scare you the front and rear motor mounts? The only ones that work are the too 2 mount plates. I sure would appreciate some direction, even if it is modification advice.
	0

07-05-2022, 09:22 AM	#3
JerryHawk250 Moderator Join Date: Oct 2016 Location: Houma, La. Posts: 11,715	You will more than likely be better off fabricating mounts form steel plate. Even if you found mounts they probably won't be exactly what you need. __________________ 2024 Linhai 300 ATV 4x4 2023 Lifan Lycan 250 Chopper 2023 Venom Evader 2022 Lifan KPX250 2020 Kawasaki Vulcan S (Sold) 2004 Honda ST 1300 2016 Black Hawk 250 (sold) Keihin PE30 carb,125 main,38 slow.Pod filter,ported & decked head 10:1 CR,Direct Ignition Coil,15/40Sprockets,NGK DPR8EIX-9,De-Cat,Dual Oil Cooler,Digital Cluster 2016 Cazador180 XL 2014 Coolster150 JerryHawk250.com My YouTube Channel
	0

07-05-2022, 09:10 AM	#2
franque Join Date: Nov 2017 Location: Marseille, France -> Conakry, Guinea Posts: 1,481	Post up, or link us to some pictures so we can see what you're dealing with. I've never heard of somebody doing the swap, though I've heard it's possible.
	0

07-05-2022, 02:00 PM	#4
franque Join Date: Nov 2017 Location: Marseille, France -> Conakry, Guinea Posts: 1,481	Also, the rear mounts are in the frame. Post up a picture of the motor, so we know what you're dealing with, the left and right sides.
	0