Ninja clone BD125-11 gt neutral issues

DIRTYTURBO · 06-27-2022, 06:05 PM

Okay so my bike has a little over 300 miles on it and runs and drives fine
But when down shifting it keeps wanting to go from third straight to neutral
Does anyone know if this is normal? Thanks!

culcune · 06-27-2022, 06:54 PM

I can't answer the question personally, but Pete, the owner of Kronik Racing is a kind of Boom Vader 125 guru, and since these use the same engine, would be able to answer you. www.kronikracing.com

dirtbkr188 · 06-27-2022, 10:26 PM

Is the shift pattern 1dn-3up?

DIRTYTURBO · 06-28-2022, 02:30 AM

Yeah

dirtbkr188 · 06-28-2022, 08:14 AM

The ridge on the shift star between 2nd and neutral is much smaller than the ridge between 2nd and 3rd, making it easier for the shift actuator arm and detent arm to drop the drum into neutral when downshifting.

Click HERE

DIRTYTURBO · 06-28-2022, 10:03 PM

!!!UPDATE!!!
shorting the shift from 3-2 helped a lot
Also I noticed that the gear shift was loose so fixed
That and it shift perfect THANKS!

06-27-2022, 06:05 PM	#1
DIRTYTURBO Join Date: Jun 2022 Location: Texas Posts: 3	Ninja clone BD125-11 gt neutral issues Okay so my bike has a little over 300 miles on it and runs and drives fine But when down shifting it keeps wanting to go from third straight to neutral Does anyone know if this is normal? Thanks!
	1

06-27-2022, 06:54 PM	#2
culcune Join Date: May 2006 Location: Yuma, Arizona Posts: 9,056	I can't answer the question personally, but Pete, the owner of Kronik Racing is a kind of Boom Vader 125 guru, and since these use the same engine, would be able to answer you. www.kronikracing.com __________________ "They say that life's a carousel, spinning fast you got to ride it well..." TGB Delivery Scooter 150 TMEC 200 Enduro--carcass is sadly rotting in the backyard
	0

06-27-2022, 10:26 PM	#3
dirtbkr188 Join Date: Aug 2009 Posts: 573	Is the shift pattern 1dn-3up?
	0

06-28-2022, 02:30 AM	#4
DIRTYTURBO Join Date: Jun 2022 Location: Texas Posts: 3	Yeah
	0

06-28-2022, 08:14 AM	#5
dirtbkr188 Join Date: Aug 2009 Posts: 573	The ridge on the shift star between 2nd and neutral is much smaller than the ridge between 2nd and 3rd, making it easier for the shift actuator arm and detent arm to drop the drum into neutral when downshifting. Click HERE
	0

06-28-2022, 10:03 PM	#6
DIRTYTURBO Join Date: Jun 2022 Location: Texas Posts: 3	!!!UPDATE!!! shorting the shift from 3-2 helped a lot Also I noticed that the gear shift was loose so fixed That and it shift perfect THANKS!
	1